All of those engines are pinnacle engineering development of their respective manufacturers. Definitely shocked by a 302 hemi Chevrolet. 303 Pontiac Trans-Am V8 engine used in the late 60's is another rare racing series engine. I'm sure all the manufacturers had super exotic variations and test designs in their labs and advanced development buildings . Probably some really awesome stuff that got disposed of after research was done.
All 426 Hemi equipped cars came with a 90 day or 3000 mile warranty. The 440 was 400 pounds lighter than the 426, and was usually quicker in the quarter mile. Some Hemis had the 2 four bbl set up.
That 302 Chevy was probably an attempt to overcome the lack of power of the Chevy 302 vs the Ford 302 in TransAm - the Ford made a hair less torque, but revved quite a bit higher. 302 for Chevy was almost specifically designed for TransAm, then some production models were made to meet "requited production" requirements - in Camero's as a minimum.
@@bricefleckenstein9666 The Ford 302 was developed in 1969. The Chevy DZ 302 came along in 1967. The same man developed both engines. He wisely took a 283 block with a 327 crank, and made the better DZ 302 engine, it was far better suited for drag racing. I watched several Chevy 302 engines dynode. Some made 366 horsepower, which is enough to show the Boss 302 it's taillights. Also, the Ford 302 would blow up easier. You can't make chicken salad with chicken $hit.
@@ricktaylor3748 The Chevy 302 had longer rods, which suited it better to being a torque engine than a power engine vs the Ford 302. And Boss 302 "blowups" were bloody rare - serious strawman argument there.
@@bricefleckenstein9666 Nope, the Boss 302 had the same length connecting rods as the DZ 302 engine. The Chevy 302 had 3.75 inch stroke and a 4 inch bore. All Ford engines blow up easy.
Don't forget the MOPAR 400 and 444 HEMI in 1969 that were supposed to replace all B, RB and HEMI engines. Dick Landy loaned a 1969 Barracuda with the 444 HEMI to a museum and he also had a spare 444 HEMI on an engine stand. I think they made about 8 of the 444 engine and only 2 or 3 remain.
Right, I have a 63 cross ram that makes 508 Fp @3500. Around 300 units made. It also taught them long small runners made more bottom end torque. Mine are 30" from valve,on a 413. The New intakes are coiled up with ports going up.
I'm thinking that the small block Chevy engines were probably the most innovated, look how long they stayed in production and how easily they could be adapted into any vehicle. Not to mention how much cheaper it cost to build them.
From one of the last "orphan" builders, Studebaker's 304.5 C.I.D. V-8 (bored out from the company's internally designed 289 V-8 - NOT Ford's). Approximately just 125 of these were built. Andi Granatelli took an R3 equipped Avanti to Bonneville in 1963, and set a record top speed for the flying mile of 170.5 M.P.H.
Just for grins... The GM 215 c.i. Aluminum V8 Engine One mean little runt mouse motor. 1963 Oldsmobile Jetfire 215 hp @ 4800 rpm 300 torque @ 3200 10.25:1 compression 1Bbl carb w/turbo charged (Grandma only drove it on Sunday to get that front row seat at church...)
The title of this video does specify _rarest_ and _NATURALLY ASPIRATED_ The 215 was not particularly rare, as it was the standard engine in all Buick Special and Olds F85 models in '61-'62, and in some Pontiac Tempests as well. Rover bought the tooling from Buick and built a bunch of them as well. Not rare, and the 215-horsepower Jetfire version was not naturally aspirated,
@@winstonelston5743 the turbo Jetfire had its own lubricant in a resavour by the firewall and it looked like milk and we called it mouse milk. It was available through the parts dept. Sometimes the canister would leak into the engine and when you would go to start the engine you can't compress a solid so it would blow a hole in the block. They fixed this later on. I was a mechanic at Olds when these came out.
BTW The Buick Olds Pontiac is still around in under license in 90s Range Rovers. Its a fuel injected 4.0 ltr. and move those Rovers just fine and they are 4000 lbs
The Chrysler A-925 DOHC 426 HEMI - 2 were built for testing, but never ran under their own power - They were the reason that Ford quit NASCAR and NHRA..... (Nicknamed the DOOMSDAY MACHINE). And the Chrysler A-279 Ball-Stud HEMI. in 400 and 440 ci. Possibly up to 12 were built, and at least ONE still RUNS.
I worked at a transmission shop in the late 2000's on weekends my boss had bought the contents of another local shop that closed. From which he found a z11 427 and the aluminum front fenders from the car, I have no idea what happened to the car itself it was already gone. After we looked up the casting numbers we spent a good couple hours tearing down that engine down just out of curiosity. Never seen the inside of a 348/409 engine before or since, it was super cool as a GM guy. Don't worry it was seized when we got it, it had to be taken apart regardless.
there were less than 100 Pegasso Z102 and Z103 V8 produced and less than 100 Alfa Romeo Tipo 33 Stradale V8s made, both of which are far more interesting than many of the regular US V8s mentioned
It was the '57 Bonneville that had the fuel injection. The '54 Bonneville Special concept car was powered by the old straight eight flathead with four side-draft carburetors and a beefy cam.
there was never a production small block hemihead you were right. there were aluminum heads though, and the late 70s HP small blocks had roller hydraulic lifters and HP cams with the long runner manifolds. those motors were peppy for 5.0 L
Pontiac didn't make a 1954 Bonneville. First year for the Bonneville was 1957. There was a 1954 Bonneville Special, looked something like a 54 Corvette. It did not have fuel injection. F.I. first showed up in various GM cars in 1957.
In terms of innovation, GM's Corp. structure has Cadillac as the #1 division, Buick #2, Pontiac #3 and Chevrolet last on their divisional totempole, where annual development revenue is distributed accordingly.
Where was the Studebaker 304.5 cubic inch R4? While as many as a half-dozen or these may have been built, only two were installed in production cars for public sale. According to 1974 literature from Avanti Motor Corporation, Studebaker never published horsepower ratings for the Avanti-spec engines. The R4 was naturally aspirated with two four-barrel carbs and 12.5:1 compression, full racing cam, electronic ignition, slightly oversquare bore and stroke dimensions. It was said that Andy Granatelli wouldn't ship a single-carb supercharged R3 version, a couple of dozen built, seven installed in Avantis and one in a '64 Commander, Granatelli wouldn't ship those engines until they had turned 415 horsepower on the dyno stand.
You should try to match the pictures to the text. You could have shown the Chevrolet mechanical FI system from the 50's instead of the 84' Crossfire injection. Not even going to bother to mention all the other mismatches.
The 63 impala had a 409 stroked to 427called the Z11, and also had the mark II 427, the so called mystery engine that raced in nascar that looked a lot like the later mark 4 427 ,but the bore and stroke was the same as the Z11. Meaning bigger bore and shorter stroke than the mark 4 that everyone is familiar with.
07:00 Chevy also sold L88 427's over the parts counter... 07:27 "forced connecting rods"... 08:02 L88 had iron heads, L89 had aluminum heads, ZL1 was aluminum block and heads...
MORE CLICK BAIT . Im sure the Italians have dozens of rare v8 engines Ive never heard of but where is the 64-65 ford indy v8 it was a stock 260 block sleaved down to 255" for indy, they had cosworth design and build DOHV heads and cams for it a front cover and proceeded to win indy. then the moved those engines to some to GT 40s and won LeMans now that was a rare engine, too bad you don't know what you are talking about. Also how about the 69 BOSS 429 mustangs that was a car and engine so rare that you seemed to overlook it. It was a production engine try to find one now!
Ok , the video was a little US-tilted. Lets correct this. ruclips.net/video/IXuw0DGX4HY/видео.html ruclips.net/video/zxMluSU6Frw/видео.html ruclips.net/video/0Bk7jiN4_Ak/видео.html How mant of any of those are running in the USA? V8-aircooled!
There was no 1954 Bonneville. The first production Bonneville was 1957. The first Pontiac V8 was 1955. Pictures don't match the commentary. Misinformation video.
The Cars & Engines Are Great! The Narration Blows As In, Virtually Painful! Thank You. (Like #986)
There are many incongruities between the narration and images shown.
That's because it's AI rubbish.
@@kenhanson4015 That must be why I saw 409 valve covers in the video and the narrative said 427
@@Randy-f2z That was the image that triggered the comment. They can't fool all of us!
Over 8 to 1 compression
Send in the fact-checkers!
All of those engines are pinnacle engineering development of their respective manufacturers. Definitely shocked by a 302 hemi Chevrolet. 303 Pontiac Trans-Am V8 engine used in the late 60's is another rare racing series engine. I'm sure all the manufacturers had super exotic variations and test designs in their labs and advanced development buildings . Probably some really awesome stuff that got disposed of after research was done.
All 426 Hemi equipped cars came with a 90 day or 3000 mile warranty. The 440 was 400 pounds lighter than the 426, and was usually quicker in the quarter mile. Some Hemis had the 2 four bbl set up.
That 302 Chevy was probably an attempt to overcome the lack of power of the Chevy 302 vs the Ford 302 in TransAm - the Ford made a hair less torque, but revved quite a bit higher.
302 for Chevy was almost specifically designed for TransAm, then some production models were made to meet "requited production" requirements - in Camero's as a minimum.
@@bricefleckenstein9666 The Ford 302 was developed in 1969. The Chevy DZ 302 came along in 1967. The same man developed both engines. He wisely took a 283 block with a 327 crank, and made the better DZ 302 engine, it was far better suited for drag racing. I watched several Chevy 302 engines dynode. Some made 366 horsepower, which is enough to show the Boss 302 it's taillights. Also, the Ford 302 would blow up easier.
You can't make chicken salad with chicken $hit.
@@ricktaylor3748 The Chevy 302 had longer rods, which suited it better to being a torque engine than a power engine vs the Ford 302.
And Boss 302 "blowups" were bloody rare - serious strawman argument there.
@@bricefleckenstein9666 Nope, the Boss 302 had the same length connecting rods as the DZ 302 engine.
The Chevy 302 had 3.75 inch stroke and a 4 inch bore.
All Ford engines blow up easy.
Don't forget the MOPAR 400 and 444 HEMI in 1969 that were supposed to replace all B, RB and HEMI engines. Dick Landy loaned a 1969 Barracuda with the 444 HEMI to a museum and he also had a spare 444 HEMI on an engine stand. I think they made about 8 of the 444 engine and only 2 or 3 remain.
Very interesting! Thanks for sharing, had no idea. Gonna look them up. God bless you 🙏
Very good information, no MOPARs mentioned, I can only wonder how many exotic RD engines by all manufacturers we haven’t heard about; yet👍🏼
it's AI... so yeah. thumbs down.
Right, I have a 63 cross ram that makes 508 Fp @3500. Around 300 units made. It also taught them long small runners made more bottom end torque. Mine are 30" from valve,on a 413. The New intakes are coiled up with ports going up.
I have to point out that the engine pictured as the Z-11 is actually a 409...
No, 64.5 to 68 Ford Mustang inline 6 aka “ThriftPower” was the default, the 289 and 289 HiPo V8s were upgrades.
The 427 galaxy was badged 7.0L
I'm thinking that the small block Chevy engines were probably the most innovated, look how long they stayed in production and how easily they could be adapted into any vehicle. Not to mention how much cheaper it cost to build them.
Why don't you know what cars the engines went into? The cammer never went into the Cobra.
I agree because in the 1963 Chevrolet He said there was a 427 and that was clearly a 409
@@leomenchey3726 i think they took a 409 and stretched it out to 427,,i think just a few were made
@@leomenchey3726Z-11. 427 cu.in. drag racing engines.
@@65merc390 true
The regular FE big block barely fit as it was, imagine trying to stuff a Cammer in there!
From one of the last "orphan" builders, Studebaker's 304.5 C.I.D. V-8 (bored out from the company's internally designed 289 V-8 - NOT Ford's). Approximately just 125 of these were built. Andi Granatelli took an R3 equipped Avanti to Bonneville in 1963, and set a record top speed for the flying mile of 170.5 M.P.H.
Surprised to not see a single Mopar, AMC, or Studebaker v8 in this list.
Sold too many of them...
Being AI, you think it would?
Just for grins...
The GM 215 c.i. Aluminum V8 Engine
One mean little runt mouse motor.
1963 Oldsmobile Jetfire
215 hp @ 4800 rpm
300 torque @ 3200
10.25:1 compression
1Bbl carb w/turbo charged
(Grandma only drove it on Sunday to get that front row seat at church...)
Put one in a 1957 MGA. No suspension work needed.
@@genefoster8601 Correct, many 215's were shipped across the pond for "projects."
They "dropped" right in an MG.
The title of this video does specify _rarest_ and _NATURALLY ASPIRATED_
The 215 was not particularly rare, as it was the standard engine in all Buick Special and Olds F85 models in '61-'62, and in some Pontiac Tempests as well. Rover bought the tooling from Buick and built a bunch of them as well.
Not rare, and the 215-horsepower Jetfire version was not naturally aspirated,
@@winstonelston5743 the turbo Jetfire had its own lubricant in a resavour by the firewall and it looked like milk and we called it mouse milk. It was available through the parts dept. Sometimes the canister would leak into the engine and when you would go to start the engine you can't compress a solid so it would blow a hole in the block. They fixed this later on. I was a mechanic at Olds when these came out.
BTW The Buick Olds Pontiac is still around in under license in 90s Range Rovers. Its a fuel injected 4.0 ltr. and move those Rovers just fine and they are 4000 lbs
The Chrysler A-925 DOHC 426 HEMI - 2 were built for testing, but never ran under their own power - They were the reason that Ford quit NASCAR and NHRA..... (Nicknamed the DOOMSDAY MACHINE).
And the Chrysler A-279 Ball-Stud HEMI. in 400 and 440 ci. Possibly up to 12 were built, and at least ONE still RUNS.
Took me to school on this video.
Hard to do, great job!!!
✌️😎👍🇱🇷
I worked at a transmission shop in the late 2000's on weekends my boss had bought the contents of another local shop that closed. From which he found a z11 427 and the aluminum front fenders from the car, I have no idea what happened to the car itself it was already gone. After we looked up the casting numbers we spent a good couple hours tearing down that engine down just out of curiosity. Never seen the inside of a 348/409 engine before or since, it was super cool as a GM guy. Don't worry it was seized when we got it, it had to be taken apart regardless.
Mopar 413 wedge 426 x Rams 🐏 AMC 390 401 . 426 HEMI 👍🏻 are legends .
Right, I have a 63 stock 413 long ram making 508 Fp @ 3500.
It depends on where you're looking. Pickup trucks are the best selling vehicles in the U.S. , and that's where you'll find the n/a V8's today.
More errors than a Braves game.
No mopar 😢
there were less than 100 Pegasso Z102 and Z103 V8 produced and less than 100 Alfa Romeo Tipo 33 Stradale V8s made, both of which are far more interesting than many of the regular US V8s mentioned
It was the '57 Bonneville that had the fuel injection. The '54 Bonneville Special concept car was powered by the old straight eight flathead with four side-draft carburetors and a beefy cam.
Great Video, I was unaware the Chevy 302-ci was a hemi, Love your channel and subscribed.👊😎🇺🇸
Regular dz 302 was not, only smokey unick built was
there was never a production small block hemihead you were right. there were aluminum heads though, and the late 70s HP small blocks had roller hydraulic lifters and HP cams with the long runner manifolds. those motors were peppy for 5.0 L
Pontiac didn't make a 1954 Bonneville. First year for the Bonneville was 1957. There was a 1954 Bonneville Special, looked something like a 54 Corvette. It did not have fuel injection. F.I. first showed up in various GM cars in 1957.
01:23 that's "bone a vill" to you! EFI in '57 Chrysler cars...
Chrysler ball stud hemi. 1 only
In terms of innovation, GM's Corp. structure has Cadillac as the #1 division, Buick #2, Pontiac #3 and Chevrolet last on their divisional totempole, where annual development revenue is distributed accordingly.
I don't believe Oldsmobile took a back seat in terms of innovation.
Correction Pontiacs have been gone for some time and Corvette still get the most performance development from what I see,
It's a Ram Air Five not a Ram Air V!
V is five. It’s a Roman numeral.
@@fredanddebramacdonald2445 I DO know that! The video commentary says Ram Air Vee not five!
And 01:23 "bone a vill"...
Artificial Intelligence generated dumpster fire video so what do you expect.
How about the 1963 Oldsmobile Turbo Rocket 215 ci aluminum block.
That Chevy 302 hemi doesn't count as a production model as you said it was a prototype
Where was the Studebaker 304.5 cubic inch R4? While as many as a half-dozen or these may have been built, only two were installed in production cars for public sale.
According to 1974 literature from Avanti Motor Corporation, Studebaker never published horsepower ratings for the Avanti-spec engines.
The R4 was naturally aspirated with two four-barrel carbs and 12.5:1 compression, full racing cam, electronic ignition, slightly oversquare bore and stroke dimensions.
It was said that Andy Granatelli wouldn't ship a single-carb supercharged R3 version, a couple of dozen built, seven installed in Avantis and one in a '64 Commander, Granatelli wouldn't ship those engines until they had turned 415 horsepower on the dyno stand.
You guys forgot the Ramirez high rubbing big black 7 leader.
Guys? LOL It's AI, bro.
421 Pontiac is not a big block it's the first big crank Pontiac the big cranks were 421 428 and floor 55
Floor 55?
01:30 Discussing '57 Pontiac F.I. and showing SOHC Hemi valve train...
01:35 Discussing '57 Chevy F.I. but showing '82 Chevy Cross Ram EFI...
02:28 Discussing Pontiac 347" engines, shows ford Mustang...
you missed all the Mopars
What V stand for? FIVE!
Rare for a reason? I find great designs are popular and long-lived.
Looks like a Studibaker
you forgot about Ford's boss engines 429 351 and 302
How about the 1952 Fiat 8V (Otto Vu), with a 2.0 liter V8, only 114 produced? As small as the Ferrari, and 20 years older.
Just to be nit-picky the trans am series was limited to 305 CID, not 302 as stated.
Well I guess Chrysler made to many 426 Max Wedges and later 426 HEMIs to make this list. I think that is a good thing.
What about the ball stud Hemi, and the 500 ci Hemi
You should try to match the pictures to the text. You could have shown the Chevrolet mechanical FI system from the 50's instead of the 84' Crossfire injection.
Not even going to bother to mention all the other mismatches.
what about MOPAR 413ci v8
Where is this guy from, his pronunciation of many of the words is strange
I think he is from AI land.
@JohnSmith-de2mz Welcome to the wonderful world of AI. So sad.
01:23 "bone a vill"...
good vid, other wise ruined with the bot voice.................................
Like many others.
I can't stand hearing them.
60s Thunderbird convertibles M code 390 three deuces
Interesting history, but I was sorely distracted by the robot narrator. Nobody speaks numbers, and other words, this way.
421 HD Pontiac is still a small block. Just like every Pontiac made engine.
8:16
How can you talk about rare then show all of these engines that had MORE production than the Ford 427 SOHC?
The 1963 Impala has a 409 W block not a 427
It could have either. Some 63 Impalas had the 427 tall block.
The engine was based on the 409 but had a 427 ci displacement.
@@fredanddebramacdonald2445 It did.
The 63 impala had a 409 stroked to 427called the Z11, and also had the mark II 427, the so called mystery engine that raced in nascar that looked a lot like the later mark 4 427 ,but the bore and stroke was the same as the Z11. Meaning bigger bore and shorter stroke than the mark 4 that everyone is familiar with.
07:00 Chevy also sold L88 427's over the parts counter...
07:27 "forced connecting rods"...
08:02 L88 had iron heads, L89 had aluminum heads, ZL1 was aluminum block and heads...
Let me guess. He died mysteriously
Enough with the AI
:28 Not a V8
Why are you showing 60s motors at the same time your showing 80s motors??? Get your facts and pictures right!! Wow!!
MORE CLICK BAIT . Im sure the Italians have dozens of rare v8 engines Ive never heard of but where is the 64-65 ford indy v8 it was a stock 260 block sleaved down to 255" for indy, they had cosworth design and build DOHV heads and cams for it a front cover and proceeded to win indy. then the moved those engines to some to GT 40s and won LeMans now that was a rare engine, too bad you don't know what you are talking about. Also how about the 69 BOSS 429 mustangs that was a car and engine so rare that you seemed to overlook it. It was a production engine try to find one now!
What? You couldn't afford to hire a narrator that can enunciate the worn hundred? How European of you.
It's AI, dude.
Ok , the video was a little US-tilted. Lets correct this.
ruclips.net/video/IXuw0DGX4HY/видео.html
ruclips.net/video/zxMluSU6Frw/видео.html
ruclips.net/video/0Bk7jiN4_Ak/видео.html
How mant of any of those are running in the USA?
V8-aircooled!
There was no 1954 Bonneville. The first production Bonneville was 1957. The first Pontiac V8 was 1955. Pictures don't match the commentary. Misinformation video.
Sorry, too many disparities...bye.
Yall fulla bullshirt
Sofa King many errors
Interesting subjects..Ruined by the AI narration!
You seem to have many mistakes in this video & mispronounced words too! Otherwise great info!
How about someone who speaks English
More AI generated erroneous garbage.
Fake news
TRASH research ANY car guys see the BS here
You forgot the ford thunderbolt .
Great video ! The first time I've seen your channel
Well produced thank you