Got theOBD LinkEx based on your recommendation and it worked great on Forscan! Did a reset on transmission for my F-150 that was clunking a bit from standstill to gas applied. Truck drives smooth now and mileage is showing improved as well. Just wanted to say thanks for the ODB overview sir.
What’s funny is when I hook up to the laptop on friends or side hustle cars with a Cord they are very impressed. When I use Bluetooth they are less impressed, and it seems like it’s a lower value service haha. It’s like they realize they could’ve googled it and figured it out themselves 😂
Its 23' now and your vids are still making this process WAY less scary than I expected. Bout to jump into a 17' Explorer Interceptor and make it a little more civilianized. Thank you.
Thanks for the great video! I just purchased the switch type in Dec 2023, and the new ELM 327 are now labeled MS HS. Best Wishes & Blessings. Keith Noneya
Have the same OBDII adapter you are using (manual switch) but cannot get the drivers to load to my computer (Windows 10). Of course when I try to hook it up to my 2022 F150 it says "no adapter found". Any ideas? Thanks
Thank you for your videos, I was able to download and resister for free trail of For scan. I did it as i followed your videos and it took maybe 30 minutes to get my code. my adapter will be here tomorrow so im glad i went ahead and got all of that ready. I should had watched this video before i ordered one but the one i ordered from amazon i hope will work fine, it does the automatic switching.
Great job, very nice explained. Very good explications. You're doing pretty nice job with the channel I'm struggling with mine :) Keep up the good work!
My 07 Mustang is having an intermitant problem with the starter relay-pcm-ign switch system. I think it might be a wiring problem. Do you think Forscan would find that? Thanks.
I have a problem forscan is telling me it “NO ADAPTER FOUND “ I have everything downloaded plus the USB driver link downloaded but for some reason forscan will still not read adapter and I have the same adapter/wire as you in the video with the switch
Hello and sorry for the inconvenience. I am trying to install the trailer brake on my f150 but the odb does not read the codes. in ForSCan I say that the odb11 is not compatible with the vehicle
I have the first one and when I open forscan it appears that the adapter does not work well for my raptor 2018 and there are options that do not appear in forscan, only 2 PCM appear
2013 f150 ecoboost 3.5 ran forscan first time got this message pcm has a custom tune installed,please enter stratedgy/calibration name Factory PCM how do i find what code is in my truck.I bought this truck used and I am trying to clear a check engine light after changing faulty plugs.I went to the motorcraft site and got the original code but when I downloaded it I coulldnt even open it or anything.
Hi ! What about ELS27 is not recommend for programming, does it means that we re not able to change parameters with that adapter ?? Cause i m checking which one to buy . Thank S
Based on the driver installed, the "counterfeit warning" is for the FTDI (this is the manufacturer) chip that converts the USB to serial for the ODB chip. There was a big kerfluffle a few years ago when FTDI changed their driver to look for counterfeit chips and ended up getting a lot of false positives on genuine FTDI chips. This earned them a big black eye in the Arduino community. Nothing to do with the ODB chip that actually talks to the car.
The ELM 327 did not work on my 2019 f150 XLT. I got a message saying it was the wrong adapter for my vehicle and all functions may not work. It worked until I got to the module I needed to open to enable my trailer brake controller. It wouldn’t open the module. 😮
Hey Brother thank for your post! Quick Question it's my first time trying this does the OBD EX work with windows 11? , I wanted to try fixing my issue on my 2016 f 150 turn signals stopped working so did my bottons on my steering wheel so frustrating I hope you can offer an advise. CHEERS
Not sure if it was asked before but is this usable for multiple vehicles. I'm assuming yes, since it's not a tuning device, but I did see that it recognizes your VIN.
Hey bro very informative video! do you know if a driver is needed for the obd2 scanner or does it communicate with forscan by its self? I have the same interface v1.5. Thanks!
Hello sir , are these connectors working with all cars with 16 pin obd plug ... or there are different kinds of connectors for German Asian and American cars? thanks
I have the elm 327, got my driver installed and changed the settings I.wanted, clicked write. But the changes didn't occur Any ideas on what it could be? I have a 2016 f150
Do you have any info about fis the engine and idle HRS, because the dealer change the truck cluster but they do not transfer the engine and idle hrs. Please let me know
Hi, I have recently bought the very same adapter v1.5 HS/MS switch but when I connect to my car (smax 2016) it says "this adapter is not recomended for your car". What should I do, can I carry on configuration ? Thanks.
@@AutoDad it goes to demo mode at first then that's what it says. And it gives me to options like it wast different persons key. I was wonder it I should uninstall the key and redo it. I have no clue.
Hello i just one to know why i did everything you show at video to do and doesnt work for me i use thé machine FORScan and i put m’y trailer brak on like you show it on thé vidéo but i can see in my cluster the brake ajustement i havé Ford f150 2015 5.0 motor thanks you and i waiting your anwser ( i dont if a do something wrong)
Your videos are great and very informative. I have a 2003 Lincoln Navigator and a 2011 Ford Taurus SEL. My interest is mostly for diagnostics, such as misfires, etc.. The Navigator is now 20 years old. With that in mind, will ForScan take care of diagnostics for both vehicles? Thanks for the feedback.
ok thanks ii have to get my dial shift knob replaced by the dealership but didn’t know if they would void my warranty? i switched out my steering wheel to add cruise control so didn’t know if they would say anything?
How do I connect my OBD Link MX + to talk to my windows10 Laptop. I bought this with the hope that I would recalibrate my back up camera and make other cool changes. I got my activation code in Forscan but it keep saying adapter cant be found.
@@AutoDad How do I go about doing so electronically. Do you know the app I should use? I am not as savvy as I should be. Never done this before but I believe you can steer me in the right direction.
Does anyone know if Forscan is available to register or activate again. How so if so? I heard it was down due to Russia Russia Russia.... I have an unlicensed version and never got a chance to activate the extended version. Any Help...thx
I see.. Man, I'm about to order an obd2 adapter to change all settings I can change on my 2016 F-150 XLT.. Do you think it works on my truck..?? Which one do you recommend.??
Hello. Why do you not mention (vLinker FS USB)? Should be recommended by Forescan I have read. I use 2021 drivers and 2022 firmware for vLinker FS. unfortunately you have to go into device manager in windows to update drivers manually.
Yes this is Robert I've got a 2012 Ford f150 4-wheel drive I've got the foreskin deal but now when I hook it up it's got a bunch of errors on it and we can't seem to get them off it won't let us run no self diagnostic check on it if you have any answers for me I sure would appreciate it so how to get the arrows off
Got theOBD LinkEx based on your recommendation and it worked great on Forscan! Did a reset on transmission for my F-150 that was clunking a bit from standstill to gas applied. Truck drives smooth now and mileage is showing improved as well. Just wanted to say thanks for the ODB overview sir.
What year is your truck? Thanks
What’s funny is when I hook up to the laptop on friends or side hustle cars with a Cord they are very impressed.
When I use Bluetooth they are less impressed, and it seems like it’s a lower value service haha. It’s like they realize they could’ve googled it and figured it out themselves 😂
100% agree and has been my exact experience! Ha ha
Its 23' now and your vids are still making this process WAY less scary than I expected. Bout to jump into a 17' Explorer Interceptor and make it a little more civilianized. Thank you.
Thanks for the great video! I just purchased the switch type in Dec 2023, and the new ELM 327 are now labeled MS HS. Best Wishes & Blessings. Keith Noneya
Great video! Thanks for sharing...Just ordered the OBDLink EX.
I will go wired 100%. Still don't like going wireless. I guess I am really old school.
Thanks from Toronto Canada 🍁
can you do a video performing the adaptive relearn on the automatic OBD please? great video
Do these clear the ABS codes/wheel speed sensor codes?
I like that it found the driver on its own. Big selling point. Thanks!
How??
My elm 327 actually came labeled. (I ordered it 2 months ago)
I call it docking with my sexy 250 Super Duty!
Have the same OBDII adapter you are using (manual switch) but cannot get the drivers to load to my computer (Windows 10). Of course when I try to hook it up to my 2022 F150 it says "no adapter found". Any ideas? Thanks
The same thing is happening to me, did you ever figure it out?
Thank you for your videos, I was able to download and resister for free trail of For scan. I did it as i followed your videos and it took maybe 30 minutes to get my code. my adapter will be here tomorrow so im glad i went ahead and got all of that ready. I should had watched this video before i ordered one but the one i ordered from amazon i hope will work fine, it does the automatic switching.
Have a 07 F150 5.4 and want to be able to read live date with truck running. Fuel pressure etc.
Does this do that or which device would I need ? Thx
Great job, very nice explained. Very good explications. You're doing pretty nice job with the channel I'm struggling with mine :)
Keep up the good work!
My 07 Mustang is having an intermitant problem with the starter relay-pcm-ign switch system. I think it might be a wiring problem. Do you think Forscan would find that? Thanks.
I don't think so. It's not that great of a diagnostic software
@@AutoDad Yea I had my doubts.Thanks
I have a problem forscan is telling me it “NO ADAPTER FOUND “ I have everything downloaded plus the USB driver link downloaded but for some reason forscan will still not read adapter and I have the same adapter/wire as you in the video with the switch
Never mind I got it to work thank you so much for the videos they help so much
What did you do??? I am having same issue
Same, what did you do?
What did you do
@@diegofragoso9180same problem what did you do
Very helpful...thanks!
How do update transmission strategy codes I am using a used transmission in a 2012 mustang
Hello and sorry for the inconvenience. I am trying to install the trailer brake on my f150 but the odb does not read the codes.
in ForSCan I say that the odb11 is not compatible with the vehicle
I have the first one and when I open forscan it appears that the adapter does not work well for my raptor 2018 and there are options that do not appear in forscan, only 2 PCM appear
2013 f150 ecoboost 3.5 ran forscan first time got this message pcm has a custom tune installed,please enter stratedgy/calibration name Factory PCM how do i find what code is in my truck.I bought this truck used and I am trying to clear a check engine light after changing faulty plugs.I went to the motorcraft site and got the original code but when I downloaded it I coulldnt even open it or anything.
How do you get to recalibrate front collision sensor? I leveled my truck and it threw it off.
such a great help, thanks!!!!
Vgate vlinker fs support feps 18v for programming but forscan not, do you have any idea where I can find another software the support feps
Hi ! What about ELS27 is not recommend for programming, does it means that we re not able to change parameters with that adapter ?? Cause i m checking which one to buy . Thank S
I actually use my els27 all the time. I have had no issues at all
Based on the driver installed, the "counterfeit warning" is for the FTDI (this is the manufacturer) chip that converts the USB to serial for the ODB chip. There was a big kerfluffle a few years ago when FTDI changed their driver to look for counterfeit chips and ended up getting a lot of false positives on genuine FTDI chips. This earned them a big black eye in the Arduino community. Nothing to do with the ODB chip that actually talks to the car.
The ELM 327 did not work on my 2019 f150 XLT. I got a message saying it was the wrong adapter for my vehicle and all functions may not work. It worked until I got to the module I needed to open to enable my trailer brake controller. It wouldn’t open the module. 😮
That is strange. I would try a different adapter
Hey Brother thank for your post! Quick Question it's my first time trying this does the OBD EX work with windows 11? , I wanted to try fixing my issue on my 2016 f 150 turn signals stopped working so did my bottons on my steering wheel so frustrating I hope you can offer an advise. CHEERS
i got my forscan download for the code, but i have no idea how to open it. what does it take to see the code?
You said it just throws codes when it's only on the "on" state. So do you need to start the car up to get the most accurate error codes?
Not sure if it was asked before but is this usable for multiple vehicles. I'm assuming yes, since it's not a tuning device, but I did see that it recognizes your VIN.
Yes it saves all my vehicles
Have you looked at the BAFX scanner ?
I have not
Great video, just ordered the auto switching one. You called it, Bidenflation now $60 and $139 (wireless). Also subbed :)
hi there
i have tried to use my els27 obd but it comes up with no adapter found when pressing connect to vehicle need help
You need to get the driver installed. I had to reach out to the seller to get a link for mine
Hey bro very informative video! do you know if a driver is needed for the obd2 scanner or does it communicate with forscan by its self? I have the same interface v1.5. Thanks!
Drivers are needed and generally auto installed via Windows
Can you change the VIN from a donor pcm and put it in your truck and change the VIN to the trucks VIN ?
I am not sure on that one
I am surprised you did not recommend any vgate adapters.
I haven't used them
Hello sir , are these connectors working with all cars with 16 pin obd plug ... or there are different kinds of connectors for German Asian and American cars? thanks
Obd2 plugs are the same, but these adapters are made for your application so no
I have the elm 327, got my driver installed and changed the settings I.wanted, clicked write. But the changes didn't occur
Any ideas on what it could be? I have a 2016 f150
I am not sure. Sometimes it takes a bot for them to register.
Is there a link to the driver?
Do you have any info about fis the engine and idle HRS, because the dealer change the truck cluster but they do not transfer the engine and idle hrs.
Please let me know
You should be able to add it under the IMRC
Can this reprogram my ecu after camphaser lockouts on f150 5.4l 3v ??
This will not modify anything in the ecu
I have the ohp ELMconfig adapter and I have a bunch of modules that say unable to read dtc. Any idea what I can do to get it to work?
I do not. Mine works just fine
Hi, I have recently bought the very same adapter v1.5 HS/MS switch but when I connect to my car (smax 2016) it says "this adapter is not recomended for your car". What should I do, can I carry on configuration ? Thanks.
Mine says the same thing and mine works fine
@@AutoDad really? so you think it should be ok? I would like to try going from 150cv to 180cv
Like I said mine says that everytime I connect and it works fine. Mine says some chip is counterfeit or something
@@AutoDad mine says the same message and works for what I’ve changed.
I have the same problem. and also it does not load all the codes
Why do you need Medium and High speed?
I just downloaded forscan and got the key and hooked it up to my truck and shows different vehicle that's not mine. Is there a way to fix this.
That is strange. Can you select "no" as an option? What does it tell you then?
@@AutoDad it goes to demo mode at first then that's what it says. And it gives me to options like it wast different persons key. I was wonder it I should uninstall the key and redo it. I have no clue.
I would just switch it out of demo mode and it should be fine
@@AutoDad ya it says demo or debug no other options
Or is there another spot to switch it
works with ford svt focus 2003.?
Hello i just one to know why i did everything you show at video to do and doesnt work for me i use thé machine FORScan and i put m’y trailer brak on like you show it on thé vidéo but i can see in my cluster the brake ajustement i havé Ford f150 2015 5.0 motor thanks you and i waiting your anwser ( i dont if a do something wrong)
Hello great vids. Will Foscan work with Apple MacBook?
I do believe so, but you will need to purchase the software I believe. It is on their website. Maybe it's the license you need to purchase
Thanks
Your videos are great and very informative. I have a 2003 Lincoln Navigator and a 2011 Ford Taurus SEL. My interest is mostly for diagnostics, such as misfires, etc..
The Navigator is now 20 years old. With that in mind, will ForScan take care of diagnostics for both vehicles?
Thanks for the feedback.
Can I use the foreskin to delete my EGR and my def pipe
2017 F350
I like your bangs
Hey bud. I having problems hooking old reader (elm327) up to my truck for forscan. Any idea? Thanks. Joe
Did you install the drivers on your PC?
@@AutoDad I did not. I’m trying. But No instructions
I would contact the seller and see if they have a link
@@AutoDad I finally got it installed..thanks for helping out..ps. Is this forscan safe?
Yes it is. All you are doing is changing settings in the modules. Nothing with the ECU
What Windows version are you using with these adapters?
I use 11
Great video, does ELS27 work with elmconfig?
One of my els27 does that I have.
will anything like this void warranties?
No
ok thanks ii have to get my dial shift knob replaced by the dealership but didn’t know if they would void my warranty? i switched out my steering wheel to add cruise control so didn’t know if they would say anything?
I have an elm not found message
How do I connect my OBD Link MX + to talk to my windows10 Laptop. I bought this with the hope that I would recalibrate my back up camera and make other cool changes. I got my activation code in Forscan but it keep saying adapter cant be found.
Did you connect the adapter to the PC first?
@@AutoDad How do I go about doing so electronically. Do you know the app I should use? I am not as savvy as I should be. Never done this before but I believe you can steer me in the right direction.
I would have purchased the wired adapter then. I know you need to first connect it via Bluetooth before anything will work
@@AutoDad So will I need a Blue Tooth Adapter?
I think the mx is bluetooth
Does anyone know if Forscan is available to register or activate again. How so if so? I heard it was down due to Russia Russia Russia.... I have an unlicensed version and never got a chance to activate the extended version. Any Help...thx
I paid $10 recently and got it just fine.
How long settings last with 2 month free license..?
Forever
what's the purpose of the license..??
To allow you to connect
I see.. Man, I'm about to order an obd2 adapter to change all settings I can change on my 2016 F-150 XLT.. Do you think it works on my truck..?? Which one do you recommend.??
It does
Versiyon nedir ford focus icin uyumlu
Hello. Why do you not mention (vLinker FS USB)?
Should be recommended by Forescan I have read.
I use 2021 drivers and 2022 firmware for vLinker FS.
unfortunately you have to go into device manager in windows to update drivers manually.
how do you find the hardware id thanks
I show this in the 1st video
Can anyone tell me if Forscan works with Apple iOS system?
Yes paid version though
Yes this is Robert I've got a 2012 Ford f150 4-wheel drive I've got the foreskin deal but now when I hook it up it's got a bunch of errors on it and we can't seem to get them off it won't let us run no self diagnostic check on it if you have any answers for me I sure would appreciate it so how to get the arrows off
Just get a cts3
I downloaded forscan, plugged in the ELM 327 obd2 plug w/ the switch, as u have. I only get a red light on it. Any help? Ty
Hi AD, i am looking for a kit to convert Sync2 to Sync4? any ideas? what wiring adapters would be required? Thx
You would need to purchase a kit. Forscan may not even be required