Absolutely amazing color combinations! Usually i don't like so much yellow color but with that black it's phenomenal. 😎👌By the way you allways have good music in your videos.🙂👍
Hi really Nice work. I have a question. First you use primer. Then the base color. And then you apply clear coat. Is that 1 k coat. And is that possible to paint anothet color on the clear coat. Will the paint stuck. And why are you doing that. Is it better when you put on the stencil if there are some clear coat insted of color. Best regards David
hello thanks for watching David, the technique with clear coat that I did was from a Japanese painter who I also watched here on youtube, the reason applying clear coat on the color coat is because the following day I would sand it off, instead of sanding off the color coat, the clear coat is being sanded instead the clear coat acts as an additional layer to protect the color coat from fading if the sanding process happens the clear coat I used is just an ordinary clear coat because it will just be sanded off
halos 3 cans din, mahirap habulin kulay kapag matitingkad, lalo na sa ganyan silver pa ung undercoat 😂 mas ok ung white nalang na undercoat para mas madali habulin ung kulay
Absolutely amazing color combinations! Usually i don't like so much yellow color but with that black it's phenomenal. 😎👌By the way you allways have good music in your videos.🙂👍
Thanks for watching brother🤜🤛
RUclips provides the music to avoid copyright issues😁
great timing! i have some ugly carbon forks to paint. cheers!
thanks for watching 👍
good luck on your project 👌
Sir I suggest mag upload ka rin ng short clips mo ng repaint sa Tiktok. mas mabilis makapag reach out ng viewers dun.
actually meron nga ako mga short clips akp sa Tiktok
kaso hindi lang updated😅
Is it okay to use black as under color for yellow?
yes you can, but it depends on the shade of yellow that you will use
Suggest naman boss carbon frame ako tas target color ko is white ano ano po need ko gamitin
Epoxy Primer, White Color Coat, Clear Coat
Sa first na pag sasand po buong frame isasand tatanggalin po lahat ng pintura?
design at clear coat, kasi magrereact un sa panibagong paint na ipapatong
Ung design lang po ba kelangan tanggalin sa una or need isand lahat ?
Hi really Nice work. I have a question. First you use primer. Then the base color. And then you apply clear coat. Is that 1 k coat. And is that possible to paint anothet color on the clear coat. Will the paint stuck. And why are you doing that. Is it better when you put on the stencil if there are some clear coat insted of color.
Best regards David
hello thanks for watching David,
the technique with clear coat that I did was from a Japanese painter who I also watched here on youtube,
the reason applying clear coat on the color coat is because the following day I would sand it off, instead of sanding off the color coat, the clear coat is being sanded instead
the clear coat acts as an additional layer to protect the color coat from fading if the sanding process happens
the clear coat I used is just an ordinary clear coat because it will just be sanded off
Thx for answer. When you sand the clear coat before add a another color coat. Are you sand all the clear coat away then? Before paint the new color.
sanding it just to have fine scratches but not necessarily remove all the clear, sanded surface will have better adhesion for the new layer of paint
Ilang coat po ng black inapply nyo?
usually 2 to 3 coats, basta macoveran lang lahat ng mabuti, mahirap din kasi pag napakapal, mas matagal matuyo
Tanong lang po sir, ilang can po ng yellow yung na ubos nyo sa frame at fork?
halos 3 cans din, mahirap habulin kulay kapag matitingkad, lalo na sa ganyan silver pa ung undercoat 😂
mas ok ung white nalang na undercoat para mas madali habulin ung kulay
magkano mag pa repaint ng mtb frame.
depende po sa design na gagawin
msg nalang po kayo sa page kung anong gagawin sa bike