I'm just surprised that you would rent it and then leave it at a customer house over night but hey you are the boss! Keep up the great work and content
Glad you are ready to start the season Eric. But carnalito if your trailer is not on leave ground and the trailer itself is not on level you putting the level on the fender is not going to be level. when ever you are attching, welding or mounting any on something that is never truely level you dont want to use a level. you are better off just using a simple tape measure and measure the same distance and space. For example you put 2 blocks of 2x4 on each tire front and back good. But then you removed 1 2x4 from the rear tire. now when you put the trailer under load you will have more clearance on the front axle but the rear axle is going to rub. Level works only if its to something that is fixed on meaning it wont ever move. saludos desde Los Angeles ca carnalito. 💯💯
Thats not true. If its strapped down correctly, it will be fine. Watch all of Ryans videos. Hes done the same thing also. So he should put all the weight on the rear end of the trailer? Thats not how you pull things.
Ya man I think this kids jumping in way too soon, although great way to learn it's not always the best for business. We shall see what the future brings for Eric
You should've had Mike weld the fenders for you that is horrible its going to break off within a month stick to what you know I've been a welder for 7 years now your weld is going to hurt someone if it comes off going down the road
Some negative no constructive hate comments but also some good comments offering advice. Your welding has come a long way (good job). I hope you get your CDL soon.
Fenders look great Eric, maybe also adding a flat bar right in the middle of both tires to reinforce it. It will shake less on the road too. Good shit though.
i said the same exact thing, you are absolutely right. he could also add some sheet metal, to make it enclosed from the inside. would help keep dust and other stuff of the equipment 🤔
Brother. You gotta load that Bobcat abit further up. It’s to far back for safety. About 3 more feet and it will drive smoother. It’s gonna sway the farther you have it back. Just an fyi.
I know you’re gonna call me a hater but definitely not how that skid steer should be loaded for one the back end not a proper tie off point and the front like that just looks unprofessional stack all your attachments in the bucket to fit it better.
He has to learn to drive a mile and pull over to check the tie down job. If he had gone any real distance he would have never made it there the front chains were already loose just on that distance.
Just warning you that if a cop sees you towing that trailer you will get a ticket because the bucket cannot be up like that because the right side of the bucket has nothing underneath it so they would call that an unstable load. Why I'm telling you this is because I don't want to see you getting a ticket because that would cost a lot of money And I want you to do great this concrete seasons ok. 👍
i dont think he cares about a ticket considering he 1:Never wears a seatbelt 2:Drives over the speed limit 3:Has a non functioning passenger side mirror 4: Has one taillight out
In that area of Wisconsin, you’d be amazed what they allow on roads man. His trailer without fenders is brand new compared to some stuff I see in Milwaukee
Hey Eric, just wanted to send some Love and best Wishes your way brother. I've been following your success since the very beginning. I was one of your very first subscribers. I'm so glad to see your doing well with your business. I want wish you nothing but the best, and hope that 2024 is a Super Year for you. Lots of Love From Norther New Jersey Papi !
He has probably had a few people tell him they would do the job and never showed up. Nothing to do with Eric. Just common with people now days. And it's only a $4k job like he said.
Eric I love the content, only suggestion would be hiring someone too edit the videos. You have good content you just need help with the actual videos. Keep it up bud! Stop being so nervous.
Rather than leveling the fender I would have pulled parallels from the deck of the trailer to the top of the fender and made them the same you got to do what you can do
Did he really drive the trailer with no fenders on it, which is illegal, to get the bobcat he doesn't need til tomorrow to leave on the South Side over night so he could come back to his yard and weld the fenders on so the trailer could sit empty in the locked up yard with the bobcat sitting in some guys yard unlocked? Why not weld the fenders on go get the machine and bring to the job the next morning?
@@johnessman7043 It ain’t my money or my reputation I’m just pointing out to Eric how he could have done it better and you got all butt hurt about advice I’m giving someone else. That’s like a mental disorder to be that worried about the words of another when it’s not said to or about you.
Nobody is complaining people are pointing out things and Commenting to add money to his channel and you are the one trying to stop them from doing that.
@@joshuahayes27 you literally have commented hate on multiple videos. Utilize that time typing to better yourself he obviously has a better life then you
Well done Eric you have really blossomed this year starting to be a good business man and giving it a go what ever you got to do even if you make mistakes don’t worry bud we all have been there and any bad comments if you do anything wrong don’t ever take it to hart bud at least your having a go and getting it done your still young and you will get it right in the end like I said well done your doing great and I pray you make it big and prosperous which I’m sure you will. and also really stepping up for Ryan at victory you can learn a lot from that great guy you can tell he really wants to support all of his team in any way he can with pride. So well done Eric.
@@timbruns3818 yes it most definitely needs some kind of brace of in the middle. I would have probably put a sheet of thin gauge plate in between the fender and trailer to keep stuff from falling off the trailer or just for looks honestly.
What a personality change from when he’s in Ryan’s videos to his videos. 100 percent ass kissing Ryan when with him. Much more genuine too while on victory’s (Ryan’s) videos. Good luck to Eric though
I JUST REMEMBER SOMETHING ERIC ONE OF THE LAST JOBS YOU DID LAST SEASON THE ONE WITH THE BIG CURVED DRIVEWAY YOU ALMOST GOT STUCK IN THE RAIN YOU NEVER DID PUT REBAR IN THAT DRIVEWAY DID YOU??? Does anyone remember that job if he did or not im almost positive he didnt guess he didnt wanna spend the money but ill bet he charged them for...BEFORE FUTURE CUSTOMERS ERIC CUTS CORNERS
Episode 3,657 and FINALLY we have fenders!!! Geez! I thought for sure those 4x6's were going to be stuck in those fender wells! haha. Well, at the least they are finally on the dang trailer. Now over the next 2,489 episodes we might get some lights put on it. fingers crossed!
@@Countertops-zs8zv that's the problem with the world today people like you are too scared to open your mouth and let someone know when they're doing wrong
Ayyye, you got your fenders, good for you. They did send you the backing plates, didn't they? If not, you'd better by some sheet metal and fill that in.
The cars backed in at United Rentals are no doubt employee vehicles and should not back all the way in to block the sidewalk that customers use . Esp the DB with black pickup and his trailer ball sticking out for people to bang into .
As I told you a couple weeks ago, the weather right now is like a North Milwaukee tweaker! Hope you enjoy your week my guy! It’s my birthday so lemme get a hat! Lmao
What the hell are you renting from other people and you’re not renting from Ryan?????????? This doesn’t look right Eric, I’m not saying nothing bad because I love you guys, but this doesn’t look it gives it awkward but keep doing what you’re doing man and hopefully you stay with the man that brought you not taught you everything he already knew everything but I brought you into the social media stuff and you know he is a damn good boss, but I know you wanna go out on your own so keep up your brother
you should ask United rentals if they have any skidsteer units for sale so you dont have to rent will save you money and will improve you image and you can put your decals on it and everything
Nice, when you get a chance I'd put a couple strips of bar stock welded to the deck side up to the fenders just for some extra support since trailers rattle and vibrate so much. Looks like a 10 or 12k trailer, just about maxing it out with the Bobcat on there?
Eric my nine yr old daughter and I have a question. My question is how do you deal with all the haters and her question is how many cheese burgers do you eat a day
I wish you much success Eric. I noted someone saying you need an editor. I agree…you probably should not have mentioned you don’t need a key to start the skid steer, not to the homeowner or on the video. Per you, not a great neighborhood…
I’d say it’s less than 30 miles and I’d put any amount on it anyone wants to bet. Welding thru paint with flux core and down hill is not something too many ppl can do plus that’s not even how you do it. You have to weld an angle to the frame and set it on the angle then weld all the way across the bottom of the fender. This is actually scary to watch knowing this guy is actually driving this on the road with a bobcat on it.
Keep chugging ahead Eric. Don't pay attention to all these man children who are jealous because they're unhappy with their own lives. Looking forward to the upcoming year 💪
@@B-tenst04 it's either that, or you don't have anything else better going on in your life and the best thing you got is to talk crap about some guy on RUclips. Yeah, go ahead and say that one out loud and then 🤣
Again with the levelling on a trailer 🤦🏽♂️. Man, you have been told numerous times last time you had a level Out working on the tool box in the other trailer 🤣
Eric, just a tip with welding using flux core. As a beginner you are better off welding verticals by going up. The type of wire you are using plays a roll but I assume you are using an all position wire. Welding downhill, unless experienced, leads to less penetration and a porous weld because of the slag....
Greenfield in general is a death trap, 60% of the time I go there I get passed by a high speed chase lmao. Greenfield rd and hwy100 is another bad spot!
Eric, you say or do a lot of things that I don't exactly agree, but I do have to say you're don't a great job in lifting your business and learning a lot. Keep up the good work.
I really wish your channel would focus on the work more then just driving and talking. Whatever your into is cool but I followed hoping to get something similar to Victory but its not even close.
Eric my man you gotta wire wheel the paint off metal before you weld it. Makes the weld easier to make and stronger
I'm just surprised that you would rent it and then leave it at a customer house over night but hey you are the boss! Keep up the great work and content
Glad you are ready to start the season Eric. But carnalito if your trailer is not on leave ground and the trailer itself is not on level you putting the level on the fender is not going to be level. when ever you are attching, welding or mounting any on something that is never truely level you dont want to use a level. you are better off just using a simple tape measure and measure the same distance and space. For example you put 2 blocks of 2x4 on each tire front and back good. But then you removed 1 2x4 from the rear tire. now when you put the trailer under load you will have more clearance on the front axle but the rear axle is going to rub. Level works only if its to something that is fixed on meaning it wont ever move.
saludos desde Los Angeles ca carnalito. 💯💯
Man Ryan is one BA mentor. He really cares about you guys and wants to see you guys succeed and make good money out of the career.
Great video Eric...keep on keeping on bro.!.!.! can't wait for the concrete to start pouring!!!😎😎💯💯💪💪🔥🔥
Eric, just a word of advice. When transporting a skid steer the bucket should always be flat on the trailer floor.
That should be common sense
Why tf would he leave it up like that holy f dude this man is something else
Thats not true. If its strapped down correctly, it will be fine. Watch all of Ryans videos. Hes done the same thing also. So he should put all the weight on the rear end of the trailer? Thats not how you pull things.
@@lovelyrat33 the rat part of your name definitely fits
Ya man I think this kids jumping in way too soon, although great way to learn it's not always the best for business. We shall see what the future brings for Eric
Instead of dropping so much money on them big ass trucks you should have got urself a skid
1000%
Just a suggestion. Maybe weld a center support on the trailer fenders. It will give the fenders more strength.
A must do
You should've had Mike weld the fenders for you that is horrible its going to break off within a month stick to what you know I've been a welder for 7 years now your weld is going to hurt someone if it comes off going down the road
Some negative no constructive hate comments but also some good comments offering advice. Your welding has come a long way (good job). I hope you get your CDL soon.
Fenders look great Eric, maybe also adding a flat bar right in the middle of both tires to reinforce it. It will shake less on the road too. Good shit though.
i said the same exact thing, you are absolutely right. he could also add some sheet metal, to make it enclosed from the inside. would help keep dust and other stuff of the equipment 🤔
Eric you need to add some supports to the inside of your fenders to stop them from bending
Good job Rerick
14:24 was the trailer leveled too before you welded. 😂😂
probably wasn’t 😂
Those fenders already came off
Can’t wait for the season carnalito!
Best wishes.
A cayar bocas!!
Love from L.A.
Brother. You gotta load that Bobcat abit further up. It’s to far back for safety. About 3 more feet and it will drive smoother. It’s gonna sway the farther you have it back. Just an fyi.
I know you’re gonna call me a hater but definitely not how that skid steer should be loaded for one the back end not a proper tie off point and the front like that just looks unprofessional stack all your attachments in the bucket to fit it better.
He has to learn to drive a mile and pull over to check the tie down job. If he had gone any real distance he would have never made it there the front chains were already loose just on that distance.
Just warning you that if a cop sees you towing that trailer you will get a ticket because the bucket cannot be up like that because the right side of the bucket has nothing underneath it so they would call that an unstable load. Why I'm telling you this is because I don't want to see you getting a ticket because that would cost a lot of money And I want you to do great this concrete seasons ok. 👍
5:39 look at how loose it was because the pressure bled the hydraulics. Dangerous as shote.
i dont think he cares about a ticket considering he 1:Never wears a seatbelt 2:Drives over the speed limit 3:Has a non functioning passenger side mirror 4: Has one taillight out
@@Bull3tBikesn that’s just the things we see on video
In that area of Wisconsin, you’d be amazed what they allow on roads man. His trailer without fenders is brand new compared to some stuff I see in Milwaukee
@@Franny_the_Fisher Few cops and turning into a 3rd world country
Good luck on a good season.👍🏻🇺🇸🇲🇽
Hey Eric, just wanted to send some Love and best Wishes your way brother. I've been following your success since the very beginning. I was one of your very first subscribers. I'm so glad to see your doing well with your business. I want wish you nothing but the best, and hope that 2024 is a Super Year for you. Lots of Love From Norther New Jersey Papi !
At this point just sell the trailer to Francisco
Even the customer thinks you’re going to flake on him.
Yeah that was crazy
He has probably had a few people tell him they would do the job and never showed up. Nothing to do with Eric. Just common with people now days. And it's only a $4k job like he said.
Eric I love the content, only suggestion would be hiring someone too edit the videos. You have good content you just need help with the actual videos. Keep it up bud! Stop being so nervous.
Rather than leveling the fender I would have pulled parallels from the deck of the trailer to the top of the fender and made them the same you got to do what you can do
I;d cut filler plates for the inner fenders would look better maybe 1/8 tp 3/16 thick!!
Great job :D sturdy !!!
you are a funny guy eric. i'm entertained watching what you get away with
Did he really drive the trailer with no fenders on it, which is illegal, to get the bobcat he doesn't need til tomorrow to leave on the South Side over night so he could come back to his yard and weld the fenders on so the trailer could sit empty in the locked up yard with the bobcat sitting in some guys yard unlocked? Why not weld the fenders on go get the machine and bring to the job the next morning?
He did it just to make you mad. Looks like it worked
when things need to be done have to get it done bet you would not get work done
@@johnessman7043 It ain’t my money or my reputation I’m just pointing out to Eric how he could have done it better and you got all butt hurt about advice I’m giving someone else. That’s like a mental disorder to be that worried about the words of another when it’s not said to or about you.
Who cares it’s a rental
QUIT HATING BRO, OR HO. GO LOOK IN THE MIRROR AND COMPLAIN!
Everyone complaining in the comments while he making money of y’all watching😂😂
Nobody is complaining people are pointing out things and
Commenting to add money to his channel and you are the one trying to stop them from doing that.
Typical fanboy, he's lucky if he made $5.😂😂
@@joshuahayes27 not a fanboy just not a hater🤷♂️
@@joshuahayes27 not a fanboy I’m just not a hater 🤷♂️ be mad bud😭😭
@@joshuahayes27 you literally have commented hate on multiple videos. Utilize that time typing to better yourself he obviously has a better life then you
Nice side view mirrors! Glad you got that taken care of.
16:58 where the welders ground is that, you should put a piece of plate steel to reinforce that middle section more. over all good job man
Getting better and learning more everyday dude. Keep pushing Eric
learning bad habits
EASY MONEY 💰💰💰💰
BIG RAY OF SUNSHINE 🌞
Well done Eric you have really blossomed this year starting to be a good business man and giving it a go what ever you got to do even if you make mistakes don’t worry bud we all have been there and any bad comments if you do anything wrong don’t ever take it to hart bud at least your having a go and getting it done your still young and you will get it right in the end like I said well done your doing great and I pray you make it big and prosperous which I’m sure you will. and also really stepping up for Ryan at victory you can learn a lot from that great guy you can tell he really wants to support all of his team in any way he can with pride. So well done Eric.
Good job eric on the fenders.
Always load skidsteer attachments in one bucket flat on trailer floor.
Helloo Easy Eeeeee keep up the great work buddy 👋
Eric level the fender to unlevel trailer 🤡
lol. yeah ya took the words right out of my mouth as I screamed at the monitor!
Eric went off the edge of the frame of the trailer, so it’s just fine. I looked good. But I would definitely add some more support with some bracing.
@@timbruns3818 yes it most definitely needs some kind of brace of in the middle. I would have probably put a sheet of thin gauge plate in between the fender and trailer to keep stuff from falling off the trailer or just for looks honestly.
Lmfao
Is he trolling not trying to leak his business name and number, you show it quite a bit eric😂
Yo Erik learn something and don’t be like “ fuck it “ type of person …
Keep doing what you do Eric. You the man 👍
This guy has a wife and kid(s) and is doing more than most at his age....
@@joshmusgrave5050 yeah cheating on his wife like she posted lmao
15:51 the fenders he should of put them down more they don't look right sitting that high.
What a personality change from when he’s in Ryan’s videos to his videos. 100 percent ass kissing Ryan when with him. Much more genuine too while on victory’s (Ryan’s) videos. Good luck to Eric though
And he's cheating on his wife and just got served divorce papers
@@Brothersfamilyfarm who is dong what lol, ol private investigator here
@@barki1295 his wife even posted on his community notes page here with proof but he deleted it this morning
hope you leveled the trailer before welding them on
love how you blur out your company information like 15% of the time but not the rest. EMR
Chris did the wrapped @ wrapshopgarage its in a short video looks great , I don't know why he doesn't want to show it
He's not the sharpest tool in the shed
@@maxbattles he said awhile back he doesn't want haters from RUclips leaving bad reviews on his business and getting his contact info etc...
Wires already hanging on the right side of the trailer tore apart
I JUST REMEMBER SOMETHING ERIC ONE OF THE LAST JOBS YOU DID LAST SEASON THE ONE WITH THE BIG CURVED DRIVEWAY YOU ALMOST GOT STUCK IN THE RAIN YOU NEVER DID PUT REBAR IN THAT DRIVEWAY DID YOU??? Does anyone remember that job if he did or not im almost positive he didnt guess he didnt wanna spend the money but ill bet he charged them for...BEFORE FUTURE CUSTOMERS ERIC CUTS CORNERS
Yeah i remember that video...he has a few videos showing how he cuts corners
U guys clearly aren't adults
Eric is making that Easy Money. To a successful 2024 season!
VAMANOS! Eric! You’re a funny guy brudda! I love the videos! Keep going up with the content and with the jobs. Saludos!
Keep hustling ma boi you're doing great.
All I gotta say is wow! If you wanna know how not to do something watch this guy!! 🤦
Most definitely lol
Episode 3,657 and FINALLY we have fenders!!! Geez! I thought for sure those 4x6's were going to be stuck in those fender wells! haha. Well, at the least they are finally on the dang trailer. Now over the next 2,489 episodes we might get some lights put on it. fingers crossed!
Ummmm just wondering why you didnt rent the skid steer from Ryan ?
Cheers from nova scotia
Gracias por el video síguele adelante Erick
Buckets legally need to be down when transporting skidsteers, it's dangerous & riding around with no fenders can get you in trouble.
Eric man, you gotta stop trying to level stuff on your trailer and truck. There’s no point lol
🤦♂️
ĆMOMM CRAAPERS!! NOBODY ASK FOR YOUR OPINIONS!! RELAX WALFARES 😂
@@Countertops-zs8zv pretty contradicting comment to make dont ya think? lol
@@Countertops-zs8zvand no one asked for yours yet here you are
@@Countertops-zs8zv that's the problem with the world today people like you are too scared to open your mouth and let someone know when they're doing wrong
I always back my t770 skid steer on when the Harley rake or more than just a bucket is on it, it rides better.
Ayyye, you got your fenders, good for you. They did send you the backing plates, didn't they? If not, you'd better by some sheet metal and fill that in.
For all of you wondering why he doesn't rent from Ryan. He won't rent to him because he knows all too well Eric's ability to fuck shit up!!
Plus he’s gotta have insurance to rent from him😂
The cars backed in at United Rentals are no doubt employee vehicles and should not back all the way in to block the sidewalk that customers use . Esp the DB with black pickup and his trailer ball sticking out for people to bang into .
Deleted another comment
As I told you a couple weeks ago, the weather right now is like a North Milwaukee tweaker! Hope you enjoy your week my guy! It’s my birthday so lemme get a hat! Lmao
What the hell are you renting from other people and you’re not renting from Ryan?????????? This doesn’t look right Eric, I’m not saying nothing bad because I love you guys, but this doesn’t look it gives it awkward but keep doing what you’re doing man and hopefully you stay with the man that brought you not taught you everything he already knew everything but I brought you into the social media stuff and you know he is a damn good boss, but I know you wanna go out on your own so keep up your brother
you should ask United rentals if they have any skidsteer units for sale so you dont have to rent will save you money and will improve you image and you can put your decals on it and everything
If they have any for sale it’s because they are junk
Nice, when you get a chance I'd put a couple strips of bar stock welded to the deck side up to the fenders just for some extra support since trailers rattle and vibrate so much. Looks like a 10 or 12k trailer, just about maxing it out with the Bobcat on there?
Eric my nine yr old daughter and I have a question. My question is how do you deal with all the haters and her question is how many cheese burgers do you eat a day
There is so much senseless hate i don’t get it, how do they think people grow?
Good one 😂
I guess the hate got to him setting up gym visits to cheat on his wife @@camelbackcustommasonry1805
@@camelbackcustommasonry1805 NOT LIKE THIS
I wish you much success Eric. I noted someone saying you need an editor. I agree…you probably should not have mentioned you don’t need a key to start the skid steer, not to the homeowner or on the video. Per you, not a great neighborhood…
Never weld flux core down hill only uphill
Mig u can weld up or downhill
no 😂
The fender is level but is the trailer level?
Hey Eric , You Should Buy Some Air Tags and Glue to Your Equipment, It would Be A Good investment. To Know where your Equipment is.
Thos fenders aint gonna hold for nothing. Wouldnt be surprised if the blow off driving down the road
I'm taking bets on how long the fender lat on the trailer 💰💸
I’d say it’s less than 30 miles and I’d put any amount on it anyone wants to bet. Welding thru paint with flux core and down hill is not something too many ppl can do plus that’s not even how you do it. You have to weld an angle to the frame and set it on the angle then weld all the way across the bottom of the fender. This is actually scary to watch knowing this guy is actually driving this on the road with a bobcat on it.
What's the over/under on that bald ass tire taking it out?
@@Stevefrench715whats the over/under on both those tires blowing within 10 seconds of each other and taking the fender out 😅
@@Stevefrench715 🤣🤣🤣
@@tradesfordaze453 🤣🤣🤣
Keep chugging ahead Eric. Don't pay attention to all these man children who are jealous because they're unhappy with their own lives. Looking forward to the upcoming year 💪
@@B-tenst04 it's either that, or you don't have anything else better going on in your life and the best thing you got is to talk crap about some guy on RUclips. Yeah, go ahead and say that one out loud and then 🤣
@@B-tenst04 You really said "it's not that deep" when you have over 60 comments on his channel trashing him 🤣
Again with the levelling on a trailer 🤦🏽♂️. Man, you have been told numerous times last time you had a level
Out working on the tool box in the other trailer 🤣
0:59 to 1:20 I can’t understand what you’re trying to say
Bro put new tires on that landscaping trailer
Tiers? like different levels on the trailer? Or tires?
@@bigrayskitchen6803yes tires thanks for catching that
Eric, just a tip with welding using flux core. As a beginner you are better off welding verticals by going up. The type of wire you are using plays a roll but I assume you are using an all position wire. Welding downhill, unless experienced, leads to less penetration and a porous weld because of the slag....
Put away the level. Use a tape to measure things.
Gald you got the fenders on, you may have to weld a plate on the inside of the fender dont know why but all the trailers i have seen have this
Should have weirded brackets for the fenders the should be bolted
The level is not always your best friend, measuring tapes Never Lie
Do you not have to be licensed in Wisconsin to do concrete work?
Erik has those true fans in his comments…jk yap yap yap away kids ⌨️⌨️⌨️⌨️
You were right you dont know what your doing...lmfao
Why not rent a skid and bucket from Ryan? Its going to be cheaper and hes your friend so even better.. anyway all the best for this year
ryan said he is not rented to friends if you watched the video
Hey... ever replace them bald tires on the trailer?
nope
Thought you might have rented from Ryan ? All the best for the season
love the videos man hope to one day meet you
Me too
Awesome video bud
Greenfield in general is a death trap, 60% of the time I go there I get passed by a high speed chase lmao. Greenfield rd and hwy100 is another bad spot!
Eric, you say or do a lot of things that I don't exactly agree, but I do have to say you're don't a great job in lifting your business and learning a lot. Keep up the good work.
Give the guy a break at least he is trying to start a business even if he does dumb stuff he will learn from his mistakes.
Better to learn by listening to people that learned the hard way instead of learning the hard way too
Great to see you growing easy E, keep up the great work.
W video, stay winning eric!
You use the level when u need a measure tape haha
GOOD WORK!
I really wish your channel would focus on the work more then just driving and talking. Whatever your into is cool but I followed hoping to get something similar to Victory but its not even close.
Its not concrte season.. that's why he ain't pouring
A whole lot of experts in the comments 😂😂
You should make a plywood rack on your skid steer trailer
His new company
You need to put some braces on the middle of the fenders, from the trailer to the fender.
Where's Wherick?
How come u don't rent the excavator for Ryan
probably not insured enough to rent out. Ryan said only rent to companies with insurance to cover damage
What jank do we have today. The box the store the box oh the thing I was talking easy teak. Oh I'll show you.