neXt RC Simulator - RX2SIM setup tutorial - With 3 Flight modes and TH

Tutorial setup video for neXt simulator, this was done using a DX8 transmitter with DSMX Sat

[@jag1506]

Damn, before this video I was unable to setup my hold switch for autoroations, thanks a lot for this.

[@simon4557]

your welcome

[@johnahamelv]

Great tutorial. I want to add that with newer Spektrum radios it is possible to add a 4th Flight Condition. The throttle curves I am using are:
Autorotation/Hold: 0% flat
Flight Condition 1: 25% flat
Flight Condition 2: 50% flat
Flight Condition 3: 75% flat
Flight Condition 4: 100% flat

[@simon4557]

you can assign a 4th but require an extra switch, unless you have a 4 position switch.

[@johnahamelv]

Yes. That is correct. I am using an additional switch to utilized the 4th Flight mode.

[@keithburrage1424]

Great video, Sadly didn't understand a word of it! Still don't know how to set it up for my Blade 230S or OMP M1. Looks like £85 down the drain! A manual would be a great help (maybe)

[@RC-Heli835]

Thanks for this. Do you have to use slider in functions for flight modes or is it the values that make it switch modes?

[@targetoz5470]

Could you please show us how you connect the spectrum radio to the laptop? I tried using my old flight sim connector and it didn’t work

[@TrailcamsRCPhotoFlying2000]

I'm new to simulators. Is there an RC2SIM available for Futaba transmitters ? I do have an old DX6i transmitter if that would work easier than setting up a Futaba ?

[@simon4557]

Yes futaba will work with rx2sim just see instruction manual for setup

[@mredzall1]

How to get the neXt software into the pc?

[@fastfrank61]

www.cgm-online.com/rc-flight-simulator/download_e.html and pay 84,90 euro or with the conet cable for your Tranmitter 91,90 so you pay and get a serial number and your activations code . You can buy him on Freakware.com or Amazon :-)))))))))))))))))