Why do you people say it requires skill to fly like that it don't It requires a lot nerves to fly this thing not skill big rc helicopter models like this can be flown with your radio behind your back and whilst still doing insane 3d there's a female 3d pilot who can do it if she can do you can do with today's gyro technology it does not need much stick throw to throw it around like this Now if you want skill lose the gyro that's what is doing 100% of the work to keep your model in the air Why do you think there are loads of people doing 3d because the learning curve has dropped old models rc helicopters had no gyros back then gyro technology is why you can smash your model like this It might take awhile to adjust to a model with so much power to kill you in a blink but once you start you will feel nervous its proof its not skill its your nerve level People who say these are fucking hard to fly cmon why do you think there more people flying these models compare that to the old days of no gyros that where nearly Impossible to fly now with a little bit on a stimulator for for newer stunts which require complicated stick movements but if you look at the stick movements on camera hahahaha Holy shit what all this this is not skill this is stick banging no skill at all That's why one slip on a stick will send the buzz saw straight at your face poor roman who got scalped by his trex 700e dfc and he was running stock aswel serves him right for not making that model handle the extra stress if I had a trex 700e dfc pro ile upgrade all the parts to KDE for a stronger build to handle the raw power of a KDE 505kv g3 motor plus better servos align servos under that stress is too scary I am surprised that people who run stock don't buy better servos anyone who runs stock is asking for it Needs to make the stress areas stronger but lighter that's why KDE wins on performance strength and lightness
jonathan oxlade Punctuation, cogent sentence structure & grammar... try 'em, you'll like 'em ;) Can't agree with what (I think) you're trying to say. It takes a shit-ton of skill to fly like this. Let's see you fly like this and then say it takes no skill. Now speaking as someone who still flies 3d with flybar helis, I can agree with you that the lack of gyro correction will keep you sharper. FBL may do alot for the pilot but I still think the pilot has more direct control without it... and I prefer that.
Stringfellow Hawke You are dumb go back to the old school models they where impossible to fly now look at how many people own these things there are thousands of people who own these modern rc helicopters and can fly these out of the box with a bit a little bit of flight training you can start to do hard smack I don't really wanna smack it reason haven't got the fast reaction if you do get comfortable smacking it close to you have you heard about the kid that got killed by this model that will put me off doing insane crack banging like this its pointless oh lets go show the whole fucking world what I can do with a helicopter let's smack it around so fast you can't see it then smack right in the fucking face dead is it even worth punishing your helicopter which its not designed to be smashed around you do know running 2200rpm or higher can increase the failure rate on your model I rather sport fly at 2050rpm doing some 3d
jonathan oxlade It's really difficult to understand what you write, but here goes... First, you really shouldn't go around calling folks 'dumb'. Especially when they have greater experience & know more about the subject matter than you do. Secondly, I never 'went back' to the old school models... I tried the new FBL ones and decided that I prefer to stay with flybar setups. Third, what in the world makes you say they're 'impossible' to fly??? Not everyone needs gyros on cyclic. Fourth, just because you don't have the skill to fly 3d, doesn't make it 'pointless'. 3d is just about the most challenging thing the RC hobby has to offer so you might extend some respect to those with greater skill than yourself. Fifth, 3d helis ARE designed from the ground up to smack... can't imagine where you got that one... lol. Sixth, if you enjoy sport flying, go for it! Have a great time & stay safe! But please don't denegrate the rest of us for pursuing a skill that you don't possess. If you're going to respond, please try to make it readable...thx.
Amazing, graceful, stressful, exciting, physics defying and terrifying all rolled in to one 4min flight from another world
Hi there Alan! It is always a pleasure watching you fly and an inspiration to advance my own lame skills. Thanks for sharing and happy flying!
great flying as usual...
Insane fly.... and Unbelivable Helicopter Too...
Nice fly man... I love your flying skill
I've watched a lot of your videos. Do you own most of these helicopters?
Absolutely incredible!! Great job!!!
Great Job Alan!
is that the tail rotor making that buzzing sound? never heard that before.
Alan, what lipo did you use on this flight?
3 years ago, but like this flight very much....!
Insane pilot
An amazing pilot!!!! if only i could have 1% of his skill!!!! keep up the hard work !!!
Why do you people say it requires skill to fly like that it don't
It requires a lot nerves to fly this thing not skill big rc helicopter models like this can be flown with your radio behind your back and whilst still doing insane 3d there's a female 3d pilot who can do it if she can do you can do with today's gyro technology it does not need much stick throw to throw it around like this
Now if you want skill lose the gyro that's what is doing 100% of the work to keep your model in the air
Why do you think there are loads of people doing 3d because the learning curve has dropped old models rc helicopters had no gyros back then gyro technology is why you can smash your model like this
It might take awhile to adjust to a model with so much power to kill you in a blink but once you start you will feel nervous its proof its not skill its your nerve level
People who say these are fucking hard to fly cmon why do you think there more people flying these models compare that to the old days of no gyros that where nearly Impossible to fly now with a little bit on a stimulator for for newer stunts which require complicated stick movements but if you look at the stick movements on camera hahahaha Holy shit what all this this is not skill this is stick banging no skill at all
That's why one slip on a stick will send the buzz saw straight at your face poor roman who got scalped by his trex 700e dfc and he was running stock aswel serves him right for not making that model handle the extra stress if I had a trex 700e dfc pro ile upgrade all the parts to KDE for a stronger build to handle the raw power of a KDE 505kv g3 motor plus better servos align servos under that stress is too scary I am surprised that people who run stock don't buy better servos anyone who runs stock is asking for it
Needs to make the stress areas stronger but lighter that's why KDE wins on performance strength and lightness
haha, dear oh dear.
jonathan oxlade
Punctuation, cogent sentence structure & grammar... try 'em, you'll like 'em ;)
Can't agree with what (I think) you're trying to say. It takes a shit-ton of skill to fly like this. Let's see you fly like this and then say it takes no skill.
Now speaking as someone who still flies 3d with flybar helis, I can agree with you that the lack of gyro correction will keep you sharper. FBL may do alot for the pilot but I still think the pilot has more direct control without it... and I prefer that.
Stringfellow Hawke
You are dumb go back to the old school models they where impossible to fly now look at how many people own these things there are thousands of people who own these modern rc helicopters and can fly these out of the box with a bit a little bit of flight training you can start to do hard smack I don't really wanna smack it reason haven't got the fast reaction if you do get comfortable smacking it close to you have you heard about the kid that got killed by this model that will put me off doing insane crack banging like this its pointless oh lets go show the whole fucking world what I can do with a helicopter let's smack it around so fast you can't see it then smack right in the fucking face dead is it even worth punishing your helicopter which its not designed to be smashed around you do know running 2200rpm or higher can increase the failure rate on your model
I rather sport fly at 2050rpm doing some 3d
jonathan oxlade
It's really difficult to understand what you write, but here goes...
First, you really shouldn't go around calling folks 'dumb'. Especially when they have greater experience & know more about the subject matter than you do.
Secondly, I never 'went back' to the old school models... I tried the new FBL ones and decided that I prefer to stay with flybar setups.
Third, what in the world makes you say they're 'impossible' to fly??? Not everyone needs gyros on cyclic.
Fourth, just because you don't have the skill to fly 3d, doesn't make it 'pointless'. 3d is just about the most challenging thing the RC hobby has to offer so you might extend some respect to those with greater skill than yourself.
Fifth, 3d helis ARE designed from the ground up to smack... can't imagine where you got that one... lol.
Sixth, if you enjoy sport flying, go for it! Have a great time & stay safe! But please don't denegrate the rest of us for pursuing a skill that you don't possess.
If you're going to respond, please try to make it readable...thx.
You clazy heli guy!!! 👍🇺🇸
call the new motor weather nator for uk weather.
wen is it out
m fond of helis. suggest me a beginner for the first time learning. thanks
Hello Alan, in 2:58, What is the name of this maneuver?
yeahh you is the best sir==
wish i had time and money for this.. ;-) great flying.. :)
that is Flippin amazing!
RcModelTest I see what ya did there brother
What batteries where they? What mAh?
Thanks
3gx or vortex?
Machine of war?
can we just call you dragon fly because your flying reminds me of just that!
IIlaminator Nengowr
Crazy????? O.o
superman
yeah...that is stupid