Just an FYI for the viewers. There is an ETS C.A.M. loader available for .45 ACP as well. However, the trough is only long enough to pick up 8 rounds at a time. For my 10 round magazines I just turn the ammo box sideways and load 5 each time. Takes a little longer but still a lot better than loading by hand.
Bought one. Tried it on Glock 22 15 round mag. Oiled the rail, the well and even a light coat on the mag itself. Never was able to get 10 at a time to work. Eventually tried one at a time to loosen it up. Then two at a time. Seemed better, but tying three jammed a round in the well each time. Also just doing one round when mag reached 11 rounds would also jam it in the well. Not satisfied at all. Maybe it is just me or bad luck, but your experience may be better. Thumbs down on this loader.
I can NOT get the loader to work worth a hoot on my Glock23 40 cal ! I have managed to get it to load 4 shells but after that it is just jammed. I have oiled it like they suggest and tried everything, just does not work as shown. POS
I purchased one and it works fine with the mags for my GLOCK 19 and CZ 75B but does not even come close to working with the mags for my SIG P320C. I even lubricated the rails thinking that was what was needed for the rounds to traverse down towards the mag, but the issue seems to be that the mags do not fit deeply enough into the loader. I don't get the same "snap" as I do when the GLOCK mags "locks" into place. The SIG mag just doesn't fit "high enough" into the loader.
I have a Browning Hi-Power, FN509 and a Sig P390. The loader somewhat works in the P390, almost none in the Browning and not at all in the FN. I contacted Fastmag and they pretty much blew me off saying the loader would have to break in. Well, it's hasn't. I have now contacted them 4 times regarding a refund on their 30 day money back guarantee and they will not respond. Do not waste your money!
This thing is epic... My mind is blown... I can't wait to hit the range this weekend. Oh and for everyone who can't seem to get it, like my mom used to say, put a lil elbow grease into it and it'll work. Took me a min to get it as well. Excellent product....
RUclips's new video policy bans all videos which promote the sale of guns or gun accessories. I hope they never find this channel. And yes, I did vote for Pete Brownell!
Agreed. Since this is not a gun accessory (a magazine is physically away from a gun and ammo is physically away from the magazine) I guess this one should be OK, then again....it's down to interpretation because the new "rules" are looser than the waist of an elephants joggingpants... Btw, have the people suing weapons manufacturers considered suing Ford - I read about at least 3 fatal crashes with Fords in the last month...also - in 2 of them alcohol was involved...perhaps they should go for a ban on alcohol as well...you know...if it could save ONLY ONE PERSON it'd be worth it, RIGHT ? Also remember that alcohol and cars aren't protected by the Constitution so it should be a whole lot easier... Some trolls really should pop out into the sunlight...and stop stalking people from doing legal stuff...
When I first got this I couldn't get it to work on a 17 round mag for a P365, nor my single stack 10 round Glock. After trying it for a while, it works well. Sometimes it won't load the last one or two but it's still pretty cool.
I got one of these for Christmas and it doesn’t work well at all like in the video. I have seen multiple videos of people loading with ease, but not me. Also I must note, that it is denting the casings and the bullets are coming out of the casing. The first rounds I tried were federal aluminum 115 grain 9mm loaded into a Glock 17 round mag. The second rounds were Remington brass loaded into the same mag. Both gave me the same results. I’ve waste about $10 in ammo. I wouldn’t recommend this product.
Given the .357 Sig and the .40 S&W have cartridge cases with essentially identical headspaces, lengths, lower-body diameters, and rim designs, shouldn’t this product also work well with .357 Sig ammunition? After all, for most (all?) autoloaders chambered in these calibers, the magazines are fully interchangeable.
I really can't believe how bad my luck is with loaders, this just flat out does NOT work with my HK 10 round mags and only SOMETIMES works with my sig 10 and 16 round mags, the first round gets jammed/ stuck at the bottom every time , I have the little ramps lubed up too, still doesn't help
Brownells, Inc. I've read various reviews stating problems using this with other brand 9mm handguns than Glocks. Any knowledge of use of this loader with the Taurus G3C 9mm and the Highpoint 995 carbine(9mm)? Thanks !!!
Thanks for doing it slow. I've already bought it but haven't gotten it in the mail yet. They do it so fast on the shopping cart page that it's hard to see how it works.
Works with almost all single and double stack 9mm or .40cal mags. you do have to lube a couple of surfaces to make it a bit easier. Used mine on the last couple of range trips and worked well. Only issue is, it made my range trip shorter because it made loading the mag so fast.
Does not work with Beretta 92 mags, I did oil the ramp, but gets stuck every time. Could work better with other brands, but in my opinion for what I need it for...it's garbage.
Kicking back watching tv while loading my 30 mags for range day tomorrow. Should I take the 45 too? OK I will load another 25 mags.I buy my ammo loose in bulk 1K rd ammo boxes, its easier to use a Uplula. I go to the range to shoot, not reload.
Yup, It's a bit finicky because the magazine hole fits double-stack mags, so just keep your single stack mag in the center. The first couple of times you use the Camloader it won't feed smoothly, so start with only one cartridge at a time and keep adding cartridges every reload as you get experienced with the action. Definitely try to break it in at home first rather than fighting with it at the range the first time you go out.
9mm doesn't work with S&W M&P mags. Tried FMJ, HP, LRN..... Not only it gets stuck, but also scratched up the rounds. Tried two of them, no go. Returned. But I did find one that works even better than the UPLULA because even with a single load, it's much faster, and it is the SpeedBeez speed loader. Due to different mag releases, they make different models, and I highly recommend one that fits your model. Here is a link to a video: ruclips.net/video/9Z2J8vxMy2U/видео.html&ab_channel=MudLakeRanch
I bought an UpLula about a year ago and I love it I have sensory & dexterity issues with my left hand, so the SpeedBeez wouldn't work for me, but it does look like a neat concept.
I have one of these. It's a piece of junk. I didn't get it from Brownell's--I KNOW they would have taken care of me if I had. The manufacturer ignored me when I reached out to them. You're lucky to load ONE round at a time. I consider Black Hills Ammo to be one of the best, but only one round at a time--cartridges seem to have alignment problems in the case rim channel, and one has to remove it from the magazine and press the misaligned rounds out through the top of the loader. Get some other brand, people...
Not good for 45 acp, dings brass, and you can only load 8 rounds at a time. For glock 45, the last 5 rounds is very tough. If you reload, do not buy. It doesn't load lead bullets
Ron Ballenger I’ve had mixed results. I don’t know if I broke something inside but now nothing is loading correctly. The first round always gets jammed now. It’s never worked as well as the demonstrator showed in this video.
@@domenickclapso8216 it may. Its not a true "universal" loader. also use some gun oil or silicon spray on the rails and on the ramps inside the loader. That may help. the vids by ETS are some good info
It's a bit late, but yes. I have a Creed and Canik both 9mm, works well on both. And I have only one hand, so ppl who can't load with it, just don't know how.
Just an FYI for the viewers. There is an ETS C.A.M. loader available for .45 ACP as well. However, the trough is only long enough to pick up 8 rounds at a time. For my 10 round magazines I just turn the ammo box sideways and load 5 each time. Takes a little longer but still a lot better than loading by hand.
Got the 556 version. Loaded about 20 mags with it . It is awesome. Much better than loading them by hand .
is that just the standard rifle version? I can't find anything on the page that says 5.56 or .223 specifically...
Bought one. Tried it on Glock 22 15 round mag. Oiled the rail, the well and even a light coat on the mag itself. Never was able to get 10 at a time to work. Eventually tried one at a time to loosen it up. Then two at a time. Seemed better, but tying three jammed a round in the well each time. Also just doing one round when mag reached 11 rounds would also jam it in the well. Not satisfied at all. Maybe it is just me or bad luck, but your experience may be better. Thumbs down on this loader.
I can NOT get the loader to work worth a hoot on my Glock23 40 cal ! I have managed to get it to load 4 shells but after that it is just jammed. I have oiled it like they suggest and tried everything, just does not work as shown. POS
@@davidmelton2328 Same thing with my M&P Shield. Stick with a Maglula. One at a time, but @ least it works.
We're in the same boat. Def not satisfied
@@davidmelton23281:44 1:44
mine works 1 out of 10 if I am lucky@@davidmelton2328
One thousands thanks for being short and informative,
Mine it doesn't do it easily like yours
Mine doesn’t either it’s best if I only load 5 at a time
@@NoToothTonyInterviews I will try 5, thanks
@@ziamura8095 and make sure your mag snaps into place before you start
It will get there. It's really hard to use at first but will ease up after a few uses.
I purchased one and it works fine with the mags for my GLOCK 19 and CZ 75B but does not even come close to working with the mags for my SIG P320C. I even lubricated the rails thinking that was what was needed for the rounds to traverse down towards the mag, but the issue seems to be that the mags do not fit deeply enough into the loader. I don't get the same "snap" as I do when the GLOCK mags "locks" into place. The SIG mag just doesn't fit "high enough" into the loader.
I have a Browning Hi-Power, FN509 and a Sig P390. The loader somewhat works in the P390, almost none in the Browning and not at all in the FN. I contacted Fastmag and they pretty much blew me off saying the loader would have to break in. Well, it's hasn't. I have now contacted them 4 times regarding a refund on their 30 day money back guarantee and they will not respond. Do not waste your money!
This thing is epic... My mind is blown... I can't wait to hit the range this weekend. Oh and for everyone who can't seem to get it, like my mom used to say, put a lil elbow grease into it and it'll work. Took me a min to get it as well. Excellent product....
RUclips's new video policy bans all videos which promote the sale of guns or gun accessories. I hope they never find this channel. And yes, I did vote for Pete Brownell!
Agreed. Since this is not a gun accessory (a magazine is physically away from a gun and ammo is physically away from the magazine) I guess this one should be OK, then again....it's down to interpretation because the new "rules" are looser than the waist of an elephants joggingpants...
Btw, have the people suing weapons manufacturers considered suing Ford - I read about at least 3 fatal crashes with Fords in the last month...also - in 2 of them alcohol was involved...perhaps they should go for a ban on alcohol as well...you know...if it could save ONLY ONE PERSON it'd be worth it, RIGHT ? Also remember that alcohol and cars aren't protected by the Constitution so it should be a whole lot easier...
Some trolls really should pop out into the sunlight...and stop stalking people from doing legal stuff...
When I first got this I couldn't get it to work on a 17 round mag for a P365, nor my single stack 10 round Glock. After trying it for a while, it works well. Sometimes it won't load the last one or two but it's still pretty cool.
I use it for my CZ 75B mags. Requires a bit of lubrication to run smoothly, but is very fast once you get the hang of it.
Would CZ RAMI mags fit this device? It takes .40 S&W
How are your mags now?
@@Mr-6666 In excellent condition. The speed loader doesn't wreck them in any way that I've seen.
I got one of these for Christmas and it doesn’t work well at all like in the video. I have seen multiple videos of people loading with ease, but not me. Also I must note, that it is denting the casings and the bullets are coming out of the casing. The first rounds I tried were federal aluminum 115 grain 9mm loaded into a Glock 17 round mag. The second rounds were Remington brass loaded into the same mag. Both gave me the same results. I’ve waste about $10 in ammo. I wouldn’t recommend this product.
Given the .357 Sig and the .40 S&W have cartridge cases with essentially identical headspaces, lengths, lower-body diameters, and rim designs, shouldn’t this product also work well with .357 Sig ammunition? After all, for most (all?) autoloaders chambered in these calibers, the magazines are fully interchangeable.
It does
well aint that nifty. gives me another reason to buy more ammo now :)
Is it only for glock magazine ?
I really can't believe how bad my luck is with loaders, this just flat out does NOT work with my HK 10 round mags and only SOMETIMES works with my sig 10 and 16 round mags, the first round gets jammed/ stuck at the bottom every time , I have the little ramps lubed up too, still doesn't help
@Steve Lee I'll give it a try!
Do they make one for a Smith & Wesson M&P M2.0 17 round mag?
will this work with a Smith & Wesson, M & P 2.0 magazine?
Brownells, Inc. I've read various reviews stating problems using this with other brand 9mm handguns than Glocks. Any knowledge of use of this loader with the Taurus G3C 9mm and the Highpoint 995 carbine(9mm)? Thanks !!!
Mine works great with my Taurus G3 PT111
This thing has been out for 6 year and they still can't get it to work?
Thanks for doing it slow. I've already bought it but haven't gotten it in the mail yet. They do it so fast on the shopping cart page that it's hard to see how it works.
does this loader ONLY work with Glock mags. or will colt 9mm fit?
SHOULD HAD BEEN INCLUDED IN VIDEO.
Works with almost all single and double stack 9mm or .40cal mags. you do have to lube a couple of surfaces to make it a bit easier. Used mine on the last couple of range trips and worked well. Only issue is, it made my range trip shorter because it made loading the mag so fast.
Try the rifle loader for the colt SMG mags
This might work well with my Walther PPS 9 mm
@@MegaBman25 Just spend more time emptying the mags! ;)
Does this work for a rock island 1911 9mm?
Doesn't work with the Ruger ECS9. Is there one out there for the Ruger?
will this work with a Glock 20 10mm?
Will it load 9mmS
Do these work as easy on the IWI Masada Magazines?
Can you use them for 10 mm ?
Do these work on Sig mags?
No issue with the feed lips?
Baikal Viking Mp446 has rifle loading system or dual bullets at top will it work on that?
Does this work with Staccato C2 magazines?
Will this work with a Walthers P99 AS...???
Will it work for FN 509 compact tactical 16-24 9mm rounds?
Maybe for Glock, but can attest that Sig P226 mags and HK P30SK mags don't work
The AR version works great
Would it work for a taurus g2c?
Does it work for a G3c?
Will this work with any other doublestack pistol magazines?
Some, but definitely not all...and some it only works with after a lot of fiddling...
Does it work with Sig 9mm mags or just Glock?
9mm/40 cal...
I can't get it to work on my Sig 9mm mags.
Anyone have any luck loading g3c mags? I crushed the cartridge trying to push it in
Does not work with Beretta 92 mags, I did oil the ramp, but gets stuck every time. Could work better with other brands, but in my opinion for what I need it for...it's garbage.
Mine gets stuck sometimes 😬
They don't work for Springfield hellcat 9mm magazine!!!
Lol never had it slide that easily. Do you have a spring in that mag? Lol
Will that work on any 9 mag
No, can attest to this today with my new Hellcat... Only the standard 9mm setups. Sub or compact, no...
Fyi this works perfect for the CZ TS2 9x19
es lo mejor que se ha inventado
I cannot get it to load my taurus G3 magazine.
Amazing.
Kicking back watching tv while loading my 30 mags for range day tomorrow. Should I take the 45 too? OK I will load another 25 mags.I buy my ammo loose in bulk 1K rd ammo boxes, its easier to use a Uplula. I go to the range to shoot, not reload.
Will it work with with the Smith & Wesson M&P 2.0 compact?
Yup, It's a bit finicky because the magazine hole fits double-stack mags, so just keep your single stack mag in the center. The first couple of times you use the Camloader it won't feed smoothly, so start with only one cartridge at a time and keep adding cartridges every reload as you get experienced with the action. Definitely try to break it in at home first rather than fighting with it at the range the first time you go out.
9mm doesn't work with S&W M&P mags. Tried FMJ, HP, LRN..... Not only it gets stuck, but also scratched up the rounds. Tried two of them, no go. Returned. But I did find one that works even better than the UPLULA because even with a single load, it's much faster, and it is the SpeedBeez speed loader. Due to different mag releases, they make different models, and I highly recommend one that fits your model. Here is a link to a video: ruclips.net/video/9Z2J8vxMy2U/видео.html&ab_channel=MudLakeRanch
I bought an UpLula about a year ago and I love it I have sensory & dexterity issues with my left hand, so the SpeedBeez wouldn't work for me, but it does look like a neat concept.
Does it work for Ruger nine mm PT 95
Not for my Ruger EC9S
Nice
This did not work for my Canik magazines
Will this work with a Tarus G3 9mm? (Sorry for noob question)
Will NOT work on P08 Luger.
I need this
Will it load zastava M57A 7.62x25 single stack mags?
I have one of these. It's a piece of junk. I didn't get it from Brownell's--I KNOW they would have taken care of me if I had. The manufacturer ignored me when I reached out to them. You're lucky to load ONE round at a time. I consider Black Hills Ammo to be one of the best, but only one round at a time--cartridges seem to have alignment problems in the case rim channel, and one has to remove it from the magazine and press the misaligned rounds out through the top of the loader. Get some other brand, people...
Idk what it is, but this thing refuses to work with my Hellcat mags. I'm about ready to throw it in the trash.
Same here. Absolutely ZERO action with the hellcat mag. Dissapointed...
Mines doesn’t work
Kinda weird when most magazines hold 15-17 rounds.
"it loads 10 rounds, you can repeat until your mag is fully loaded" it must be nice living in free states.
Not work with all mag.
I bought this and its absolute trash for me it dont work-- i got at best 2 bullets in the mag
would it work with the new canik double stack tp9 elite sc?
it might. its more or less designed for the most common single and double stack mags
Yes, I have that gun, works excellent.
Bought one ,doesn’t work
Just gave me a gungasm...
I've tried may times different ways and cannot get it to work with a Springfield Hellcat mag..... Damn
Bummer that's what I was wondering. Glad I found your review before just purchasing
This thing is a pain in the ass to use for .45 Glock mags. It's NEVER worked like it does in the video.
ETS Work with a 9 mm Beretta
yes
I got this for my CZ 75 magazines. Wouldn't load more than one round ..if I was lucky ...waste of money
You make it look soneasy
Not good for 45 acp, dings brass, and you can only load 8 rounds at a time. For glock 45, the last 5 rounds is very tough. If you reload, do not buy. It doesn't load lead bullets
I’ve had 2 and neither worked
Ron Ballenger I’ve had mixed results. I don’t know if I broke something inside but now nothing is loading correctly. The first round always gets jammed now. It’s never worked as well as the demonstrator showed in this video.
Cmod43
Does it work with 40 cal Smith n Wesson mags
@@domenickclapso8216 it may. Its not a true "universal" loader. also use some gun oil or silicon spray on the rails and on the ramps inside the loader. That may help. the vids by ETS are some good info
Just to let you know your product sux. I can load on round at a time. Brand new sig with a brand new loader.
Am I not pressing hard enough or something? It seems like it doesn't want to load. Am I being a wuss? 😄
This loader is crap. The mags don't fit right so all it does is push the ammo into the gaping hole between the mag and the rail.
That aint gonna work on my 30 round clip
These things are junk, even with oil on them it is hard to load a magazine.
Junk
Cumbersome and awkward. Thanks, but no thanks and I''ll stick with my Maglula Uplula.
I need
does it fit a sig sauer mag?
Will this work with a Walter creed 9mm mag?
It's a bit late, but yes. I have a Creed and Canik both 9mm, works well on both. And I have only one hand, so ppl who can't load with it, just don't know how.
Can this work with my beretta APX mag?
I would also like to know
Will it work for CZ Scorpion Evo3 S1 magazines?
the rifle loader loaded most smg mags as well, check thier website, should have a list of mags it can load