Yes, I bought it a month ago, today I used it first time. And worked fine. Since my car was not used for a while, the battery was low and had aprox 12.2 volt, this means is low 50% discharged. Around 6h was on charge, I left the house and after this time when I got home was full. Around 12.9 V full, but it will drop to normal.12.7 V wich means battery full 100% Battery 12V, 75Ah start-stop
Hi. Since I was away and didn’t drive my car for 15 days, I decided to buy a charger to recharge the battery. I purchased the same model, ULGD 5.0 E4. However, once the device reaches 4 bars, indicating the battery is fully charged, it keeps flashing and, after a few minutes, drops back to 2 bars, as if it’s starting the charging process over again. Do you know why this might be happening? I should mention that the battery is practically new and only 3 months old.
@musketierzz I filed a warranty claim for my charger and wanted to exchange it for another one because it turned out to be defective, but in the end, I was left without a charger since they were no longer in stock.
Hi, To answer your question: 1. This device has no battery inside (it does not store power/electricity/whatever) 2. Find a safe place to use the battery charger 3. First connect - carefully - RED WIRE to (+) 4. Second connect - carefully - BLACK WIRE TO (-) 5. Connect device to power outlet 6. Select program (press the button until you reach desired program) 7. Let the device charge the battery 8. As much as possible, do not let the device unattended. 9. DO NOT LET CHILDREN PLAY NEAR THE DEVICE DURING USE! Hope this helped! Friendly advice, you should read the manuals first, especially in sensitive electrical stuff. Stay safe!
Am cumpărat recent și eu recent acest aparat din LDL. Conform instrucțiunilor am conectat firul roșu la+ și ulterior firul negru la - .înainte de a conecta aparatul la priză. Nu știu de ce face flamă când pun cablul pe -? Este normal? @@flaavius
@@alexandrumircea323 Depinde cât de mare este flama, orice flamă puternică care lasă urme vizibile pe borne sau pe crocodil sau care persistă, nu este în regulă. Dacă este ceva de tip scânteie (una singură, foarte scurtă) este în regulă, practic așa se realizează conexiunea. Nu uita, mai întâi conectezi bateria și apoi bagi în priză. Eu am lăsat bateria la încărcat prima zi sub supraveghere doar pe timpul zilei și a doua zi am lăsat-o și noaptea, că "am prins încredere".
Yes, I bought it a month ago, today I used it first time. And worked fine. Since my car was not used for a while, the battery was low and had aprox 12.2 volt, this means is low 50% discharged. Around 6h was on charge, I left and after this time when I got home was full.
Yes, I bought it a month ago, today I used it first time. And worked fine. Since my car was not used for a while, the battery was low and had aprox 12.2 volt, this means is low 50% discharged. Around 6h was on charge, I left the house and after this time when I got home was full.
Around 12.9 V full, but it will drop to normal.12.7 V wich means battery full 100%
Battery 12V, 75Ah start-stop
so you dont need to remove poles from your car to connect this charger?
In the manual it says to disconect.
i dont know how warmful it is if you dont do it
Его можно использовать без подключения к электричеству , как портативное устройство?
Could it be used for a RAV4 hybrid
Hi. Since I was away and didn’t drive my car for 15 days, I decided to buy a charger to recharge the battery. I purchased the same model, ULGD 5.0 E4. However, once the device reaches 4 bars, indicating the battery is fully charged, it keeps flashing and, after a few minutes, drops back to 2 bars, as if it’s starting the charging process over again. Do you know why this might be happening? I should mention that the battery is practically new and only 3 months old.
Experienced exactly the same (issue), unsure why it's doing this. Any explanation will be helpful.
@musketierzz I filed a warranty claim for my charger and wanted to exchange it for another one because it turned out to be defective, but in the end, I was left without a charger since they were no longer in stock.
Do i have to charge it first before to use it or i only use direct to the socket if someone knows please?
Hi,
To answer your question:
1. This device has no battery inside (it does not store power/electricity/whatever)
2. Find a safe place to use the battery charger
3. First connect - carefully - RED WIRE to (+)
4. Second connect - carefully - BLACK WIRE TO (-)
5. Connect device to power outlet
6. Select program (press the button until you reach desired program)
7. Let the device charge the battery
8. As much as possible, do not let the device unattended.
9. DO NOT LET CHILDREN PLAY NEAR THE DEVICE DURING USE!
Hope this helped!
Friendly advice, you should read the manuals first, especially in sensitive electrical stuff. Stay safe!
Am cumpărat recent și eu recent acest aparat din LDL. Conform instrucțiunilor am conectat firul roșu la+ și ulterior firul negru la - .înainte de a conecta aparatul la priză. Nu știu de ce face flamă când pun cablul pe -? Este normal? @@flaavius
@@alexandrumircea323 Depinde cât de mare este flama, orice flamă puternică care lasă urme vizibile pe borne sau pe crocodil sau care persistă, nu este în regulă. Dacă este ceva de tip scânteie (una singură, foarte scurtă) este în regulă, practic așa se realizează conexiunea.
Nu uita, mai întâi conectezi bateria și apoi bagi în priză.
Eu am lăsat bateria la încărcat prima zi sub supraveghere doar pe timpul zilei și a doua zi am lăsat-o și noaptea, că "am prins încredere".
@@flaavius Mai întâi am conectat bateria, pe urmă am introdus în priză .Într-adevăr nu este o flamă mare. Mulțumesc
I just bought today from LIDL I will try tomorrow with my bike battery.
So, how’s it working?
@ДаниилСамойлов-ш8в works well
is this good?
Yes, I bought it a month ago, today I used it first time. And worked fine. Since my car was not used for a while, the battery was low and had aprox 12.2 volt, this means is low 50% discharged. Around 6h was on charge, I left and after this time when I got home was full.
@@cyp10100 i got it and i still can't figure how it works