hey Matt I'm so glad to see you're making videos again can you make a video on these newer cars front window strips with all the matrix dots thank you for all the information you provide us
I didn't know why I ended up watching a guy tint windows in the first place, but I gotta say your process is fantastic, congrats! Job so well done that I watched to the end.
Haha thank you very much! I end up down the RUclips rabbit hole pretty often and it's nice to be on the other end of that. I really liked this comment 😊
I’m gonna have to start shrinking windows like you. It looked so much faster, and as we all know.... time is money in the world of tinting. Thank you for the video.
TintStuff Hey Matt what is your opinion of Tint Depot and the tint they sell ? If you have heard of them beofre. I'm goimg to make a large purchase from them and was wondering if your familiar with the quality of their tint, they have good prices, however; I cant find reviews for them online. Btw my names Matt as well, great name 😃
how much does the plotter and glass boards cost? That looks real easy using the two and you probably don't get as much contaminates you have to pull the tint up to remove when you are laying it down.
I usually cut out by hand and just place templates on car windows and shrink from there after machine cut. Much faster to cut out all the patterns and place on each glass
how do you cut the front that has been in the heat gun using the ploter so that you can directly trace it to the windshield without cutting it manually
does computer cut always leave a light gap on the sides ? @10:36 thats at least 1/4 inch and after that when cleaning the glass you kept looking at it.
Hi I have questions. Graphtec Plus CE6000-120 48 Inch. That machine is working the suntek software ? I'm looking for car window tint film culture. Please help me. Thank you
Would a “DOUBLE-SIDED MOBILE MAGNETIC GLASS MARKER BOARD” work as a peel board? Definitely need some help if you hav any recommendations for a peel board. Your content is great 👍🏽
Where can one purchase the Computer Cut Software. I tried looking online and only found Solar Guard selling it but wouldn't let me send a request form for some reason. Thanks
Hey Matt is this the plotter you would recommend? Do you have any idea the best one for tint and ppf? Also are there plotters that will cut the actual shape out for you? Still learning about this. Thanks in advance!
i appreciate the videos..I learned from your videos i think back in 2012 or something but I am still struggling with wrinkles when heat shrinking windows and rear window. Am I not suppose to use water to tact the film when doing so? i feel its causing me alot of creases. I wish I had money to take a training course so I can start my business.
How do you tint glass that's curved much more than that? I feel like taking it from a straight glass board to the door doesn't make sense in my head, how's it going to conform to the window well? o.o
Also, in your endevours did y ou even consider a cutter for vinyl decals or even a printer for car wrapping business designs? I'm trying to get into that world but there's such limited info, i'm finding it hard to find someone I can talk to that will expand my knowledge of it all. That cutter looks bloody awesome, what did that set you back?
Hey what’s up my man I have my own tint shop , I’m not into the glass board much , but I want to try it , where can I find one ? That will be so helpful !
+Ricky Q I've noticed the same thing! I actually edited the part out where I rounded off the top corners because the driver's side window pattern curls up. I've seen it on quite a few vehicles. Tinttek was the most consistent but took a while to get some new patterns. It's been a while since I've used it but honestly they all have drawbacks. And don't ever count on accurate windshields lol
could you please recommend a affordable plotter and everything I need with it? I see a nice man near my city that spent some time showing me shrink techniques and he was using a GCC machine but not sure what sfotware he was using
+Reges Castro here ya go! amzn.to/2EiXoWH I've seen people use shorter sections and also wrap the tape around metal rods so they sit on the seal and you can reuse them.
@@DetroitTintStudio That lens is phenomenal! I'm Aaron by the way. I'm the video guy for Flexfilm. I also use the Sigma 18-35mm but on a Canon C100 Mk II. I use a 7D Mk II as my B camera. Just thought I'd comment and see what camera you are using. Thought it might have been a Panasonic GH5. Keep up the good work, Matt!
+JBIRD575 thanks! I'm totally new to trying it but it doesn't seem that difficult once you know what to do. I've talked to a few guys and have a better understanding of the few popular methods. I hope to have a better explanation in my next video
TintStuff I tried it shaved with blade first them heated it real good first..this one guy taught me use a seperate bottle with little alcohol and light soap for top edge works great dries fast....the key to file is have it dry
I cannot believe that people worry about water getting on their inner door panel. Do they not use their vehicles when it's raining or snowing in fear of moisture touching their precious interior? haha
Great to see you doing videos again. I noticed that you are trying to file the edges of the glass. There is a trick to doing it and it takes some figuring out to accomplish but always looks super pro once you get it down. there is a youtube tinter, TreyTints, that shows and explains how to shave and Micro Edging windows but his videos are kinda hidden and not really great but the guys really professional at tinting. I have learned some things from watching his videos. Heres his link if you are interested in watching his shaving Microedge tricks. ruclips.net/video/Dp0x6nDHc-A/видео.html Watch part 2 also ruclips.net/video/KUHjTy4csPc/видео.html Hope this helps you out a bit. Give this guy Trey a shout out if you feel hes worth the time to mention, he's really great at tinting and explaining why he does what he does.
Great video where can i buy a good plotter.?
hey Matt I'm so glad to see you're making videos again can you make a video on these newer cars front window strips with all the matrix dots thank you for all the information you provide us
you can lay the tint on top of them
I didn't know why I ended up watching a guy tint windows in the first place, but I gotta say your process is fantastic, congrats! Job so well done that I watched to the end.
Haha thank you very much! I end up down the RUclips rabbit hole pretty often and it's nice to be on the other end of that. I really liked this comment 😊
I’m gonna have to start shrinking windows like you. It looked so much faster, and as we all know.... time is money in the world of tinting. Thank you for the video.
RUclips video links changed. This was the video i was talking about at 6:45 ruclips.net/video/XhBPIbPItVQ/видео.html
TintStuff Hey Matt what is your opinion of Tint Depot and the tint they sell ? If you have heard of them beofre. I'm goimg to make a large purchase from them and was wondering if your familiar with the quality of their tint, they have good prices, however; I cant find reviews for them online. Btw my names Matt as well, great name 😃
Great video! Just one question. What did you set the force and speed to on the plotter?
Plotters look cool. Might have to see if my boss will fork out the money for one lol. I usually shrink on the door itself so you get the curve right.
Where can I get one of those big Glass boards for my shop! It looks so easy to work on rather than cutting and risking a cutomer’s vehicle.
What's in your solution and how much soap do you use???...
Interesting shrinking method, never heard of doing it that way before. Does the plotter method save you quite a bit of time?
+Kansas Country as a 1 man show it really doesn't save much time but with a assistant it definitely can. I'll go into further details on plotters.
TintStuff awesome. I'm looking forward to it!
i tell you men i love watching your video all ways learn something NEW
Hey man, nice to see you again.
how much does the plotter and glass boards cost? That looks real easy using the two and you probably don't get as much contaminates you have to pull the tint up to remove when you are laying it down.
I usually cut out by hand and just place templates on car windows and shrink from there after machine cut. Much faster to cut out all the patterns and place on each glass
what program do you use
how do you cut the front that has been in the heat gun using the ploter so that you can directly trace it to the windshield without cutting it manually
Greetings from Germany Matt
What kind of glass are the peel boards made of? Is it just tempered
does computer cut always leave a light gap on the sides ? @10:36 thats at least 1/4 inch and after that when cleaning the glass you kept looking at it.
Pls tell which vinyl plotter cutting machine are you use and recommend and which sizes cutting machine need use tint cut ?
I'm glad to see videos again. I learned alot from you. I like ur clean shop! Where have you been, do you own ur own shop now?
how much was your cutter? need one like yours! great video well explained.
Ty. Greetings from Bulgaria ;)
Hi I have questions.
Graphtec Plus CE6000-120
48 Inch. That machine is working the suntek software ?
I'm looking for car window tint film culture. Please help me. Thank you
More about plotters if you get the time
Where did you have that table build
Would a “DOUBLE-SIDED MOBILE MAGNETIC GLASS MARKER BOARD” work as a peel board? Definitely need some help if you hav any recommendations for a peel board.
Your content is great 👍🏽
Where do you purchase the plotter software ?
Thank you, Matt.
Hey bro. Can that software work with any plotter. And would I have connect the software with the plotter?
Can you make a video about going mobile. I’m going to get window tint training and doing it mobile part time
Hei bro, I am interest your spray. Whats product?
What water bottler spray are you using
Do you still use this same software? TIA
Great video and lots of help.
What is the name and model of your plotter used in the video?
Good video. Whats the best tint plotter/cutter one can buy?
What was that little white tool you were holding the door seal back with?
What’s a good affordable plotter to buy for tinting and PPF?
Do you have to shrink it on a Flat surface or can you shrink it on the car window?
Where can one purchase the Computer Cut Software. I tried looking online and only found Solar Guard selling it but wouldn't let me send a request form for some reason. Thanks
Nice Video, the Shrinking i have to try.
What do you use to protect the door panel
Hey matt. How do i get the glass to make a glass board. And how much is the glass usually
What setting is your gun on? I use the same and it's my go to compared to others
Hey Matt does the gator blade do as well as razor blade
where did you buy your glass stand for films ? and what is the best software in the market for cutting?
Holy shit man!! You’re back!!
Surprise! 😁
Have you used the LLUMAR brand pattern program? If so have you noticed any difference in accuracy between it and other software?
i would like to know where did you purchase the tape
is this computer cut software? how accurate are your cuts? and year models and makes does it range from?
subscribed!
What is the name of the shearing program and what is the name of the shearing machine
Hey Matt is this the plotter you would recommend? Do you have any idea the best one for tint and ppf? Also are there plotters that will cut the actual shape out for you? Still learning about this. Thanks in advance!
What plotter do you recommend? GCC jaguar, Roland, motul or graphtec?
What software are you using for the plotter? Love your video’s by the way 👌🏼
Trucut by suntek, it's better than most but I have issues with all of them
TintStuff Thank you for the fast reply. So cutting out by hand is maybe even the best way.
i appreciate the videos..I learned from your videos i think back in 2012 or something but I am still struggling with wrinkles when heat shrinking windows and rear window. Am I not suppose to use water to tact the film when doing so? i feel its causing me alot of creases.
I wish I had money to take a training course so I can start my business.
04av6 use the dry shrinking method
what brand and style i that plotter and what is your opinion on it?
Where can I buy all the tools and equipment you have?
What plotter you use? And what is the driver for plotter please
where do you get those doors panel's plastic ?
How do you tint glass that's curved much more than that? I feel like taking it from a straight glass board to the door doesn't make sense in my head, how's it going to conform to the window well? o.o
Also, in your endevours did y ou even consider a cutter for vinyl decals or even a printer for car wrapping business designs? I'm trying to get into that world but there's such limited info, i'm finding it hard to find someone I can talk to that will expand my knowledge of it all.
That cutter looks bloody awesome, what did that set you back?
Hello. What size does your glass boards ? Thanks
How can I buy this software?
What cutting machine to you use
Hey what’s up my man I have my own tint shop , I’m not into the glass board much , but I want to try it , where can I find one ? That will be so helpful !
Any input on plotter blade settings?
Como puedo adquirir estos productos?
Where did you purchase your hose for your sprayer?
What do you like best, to or bottom loading
+Marinus Dekker i haven't even heard of bottom loading until recently. Looks interesting but for now I'm just doing it in halves.
what's that plotter model?
Do a shop tour with all of your tools included
I was wondering where you got your plotter ??
Nice heat shrink method. You use tinttek?
+Ricky Q I love tinttek but in this video I'm using a software called computer cut.
I’m using computer cut too. Top edge is so so. Planning to switch either tinttek or film vinyl. What do you recommend
+Ricky Q I've noticed the same thing! I actually edited the part out where I rounded off the top corners because the driver's side window pattern curls up. I've seen it on quite a few vehicles.
Tinttek was the most consistent but took a while to get some new patterns. It's been a while since I've used it but honestly they all have drawbacks. And don't ever count on accurate windshields lol
could you please recommend a affordable plotter and everything I need with it? I see a nice man near my city that spent some time showing me shrink techniques and he was using a GCC machine but not sure what sfotware he was using
04av6 I use Gcc 60” and Computer cut software.
what brand plotter do you have?
What does that software cost?
What software do you use for the cuts?
You're the best my friend what is that machines name I want it! do you recommend it?
It’s $$$$
How/where do I get the plastic to protect the door panel?? Thx.
+Reges Castro here ya go! amzn.to/2EiXoWH
I've seen people use shorter sections and also wrap the tape around metal rods so they sit on the seal and you can reuse them.
TintStuff nice. Thx buddy.
How much is the plotter?
Hi Matt, what software did you use here?
Good question
Trucut
Are you the owner? Man you make it all look easy
hey matt where do you get plastic to cover the door panel ?
Memo Quinto here ya go! amzn.to/2EiXoWH
thank you matt!
Hey Matt, nice jib! What kind of camera are you using?
Thanks man! Canon SL2 with a sigma 18 to 35 f1.8 lens.
@@DetroitTintStudio That lens is phenomenal! I'm Aaron by the way. I'm the video guy for Flexfilm. I also use the Sigma 18-35mm but on a Canon C100 Mk II. I use a 7D Mk II as my B camera. Just thought I'd comment and see what camera you are using. Thought it might have been a Panasonic GH5. Keep up the good work, Matt!
Nice video is filing hard???
+JBIRD575 thanks! I'm totally new to trying it but it doesn't seem that difficult once you know what to do. I've talked to a few guys and have a better understanding of the few popular methods. I hope to have a better explanation in my next video
TintStuff I tried it shaved with blade first them heated it real good first..this one guy taught me use a seperate bottle with little alcohol and light soap for top edge works great dries fast....the key to file is have it dry
TintStuff still experimenting with wet shave with a blade brotha!
What kind of sprayer are you using?
Justin Ahr pressurize 3 Gal
Man I wish I woulda found this video 5 years ago
I cannot believe that people worry about water getting on their inner door panel. Do they not use their vehicles when it's raining or snowing in fear of moisture touching their precious interior? haha
winning!
That was amazing
I could just imagine all the contamination for a better instal take off the door panels
Ur the man .
Boa meu amigo
water water water, a water comment
Spider man
Great to see you doing videos again. I noticed that you are trying to file the edges of the glass. There is a trick to doing it and it takes some figuring out to accomplish but always looks super pro once you get it down. there is a youtube tinter, TreyTints, that shows and explains how to shave and Micro Edging windows but his videos are kinda hidden and not really great but the guys really professional at tinting. I have learned some things from watching his videos.
Heres his link if you are interested in watching his shaving Microedge tricks. ruclips.net/video/Dp0x6nDHc-A/видео.html
Watch part 2 also ruclips.net/video/KUHjTy4csPc/видео.html
Hope this helps you out a bit. Give this guy Trey a shout out if you feel hes worth the time to mention, he's really great at tinting and explaining why he does what he does.
Where did you get the glass table your plotter feeds onto?