My ford fiesta showing powertrain light flashing on dishboard so cannot goes rpm above 3, I replace 2 injector but on driving 50 km same problem comming what I do?
You're wellcome. To understand whether or not the problem is related with any of the keys you have, you may try starting the car with the keys one by one and observe if the alarm turns on with one of keys or with all of them. Cheers...
To learn average fuel econpmy in miles per UK gallon, you should press odometer button until you see "rAFEXX" (rolling Average Fuel Economy) here XX stands for UK galon of fuel consumed.
Hello, I get "er 1501" on the cluster, is this a dtc code? Also, my "hill descent" and "water in fuel filter lights" symbols don't light up at all in the LED tests. Is this a problem? The symbols can be found on this google image link below. Symbol number 41 and 47. My engine DTC codes are p2160, p0707, and p2802. 139946-dashboard-instrument-cluster-warning-lights-what-each-symbol-means.html
Hi Handyguy62 I only have one key which is only a flat one with no battery, had a look at the error codes everything seemed ok, will have to find someone with a hand book. Cheers
Hi Gary, thanks for the update. Having no error codes is good news. The key you have is the spare key without remote but still has a chip inside to communicate with the PATS system to start the car, if you have one key at the moment don't lose it otherwise it may cost you a lot to start your car again! You can download user manual of your car from Ford official website in pdf format. Cheers...
Hi just brought a Ford Fiesta zetec 1.4 2003 there is a light come on in the dash board orange flashing with the outline of a car with a padlock running though it,once I turn the key it goes off any ideas. Thank
Hi, "yellow" warning lights means something needs to be serviced or repaired soon. Based on your picture description it should be "gas cap" warning light. The check gas cap light indicates that the gas cap is not tightened properly. I hope this info hels you, Cheers.
Damn this is a very good tip! thanks.Between, i would like to know if the belt light works in your car, i have a ford 5 phase 2 1.4 tdci ghia, but don't know if i have this program Inside.?
You're wellcome. I'm not exactly sure which light you're referring to? But with the test procedure shown in the video you can see al lights working on the display. Of course, you can try and see if you have program on your car..:-)
And i have another question about the steering Wheel of this car, the steering Wheel is hard to turn (i had a Twingo 2 before). They told me it's normal because it's not an electric rotation. For you, what do you think ? And compared to a Dacia car ? because i had a Renault car which they use the same steering Wheel as Dacia. thanks for your answers .
During maneuvering (i.e parking) steering may seem hard to turn.That's why most cars have electrical or hydraulic systems to make turning steering easy. I'm using both Ford and Dacia they are not very hard to turn, Dacia is little bit harder as tyre size and area touching the road is larger so there is more friction. If the front tyres not inflated to normal air pressure it also makes turning wheel harder. I hope these answers help you. :-)
Exactly ! the Ford have a hydraulic steering Wheel, and while parking it's very hard to turn in my case. Dacia have an electric steering. So if you think Dacia is more harder , then i have a problem in my hydraulic system. Or in you Dacia...You didn't tell me about the seat belt."I meant, if we forgot to fix the"seat belt", does it make noise (like Bip bip bip...) or the light display activate, or nothing at all?"
Hi my 2007 fiesta has hesitation I’ve changed the coil pack spark plugs cleaned the throttle body sensor and oxygen sensor but still have a hesitation any idea why? It’s manual and in all gears, it was in neutral but that’s gone now, could it be back pressure from a blocked catalyst converter?
Hi thanks for quick reply went out and tried the filler cap every thing seemed tight and fitted correctly but it still flashes until I turn the key on, I did say it was a orange light but in fact it's red. I asked someone at work who thought it was the car alarm but I don't think there is one fitted. Any more ideas. Thank Gary
Red colur with car and a padlock shape should be "Passive Anti Theft System (PATS)" indicator. There might be some issues about PCM system recognizing your key (there is a transponder chip in the key communicating with PATS so the car recognizes its key and wont start with some other unauthorized duplicated key) but usually in this case light stays on and car doesn't start if it starts there might be some other issues even a bad grounding. I don't want to speculate more and confuse you at this stage, to be more specific more data is needed. There are plenty of videos posted on "PATS light" problems those videos might be helpful to you. Wish you the best...
One other thing, in your case there shoud be an error code generated, did you check for error codes as described in the video or by using an OBD-II dignostic tool ?
At a repair shop or a service to reset the error codes a computer with specialized diagnostic software is connected to "OBD-II" connector of your car and error codes analyzed and cancelled. Ofcourse they will charge you for this job. (Ford Fiesta OBD-II connector is located underneath the steering column with a cover on it.) Not to be charged I doerror code cancelling myself using an "ELM" series dongle by using the software comes with it. The software must be loaded to the smart phone and the dongle and phone must be paired for bluetooth communication. I have loaded several videos about using "ELM" OBD-II tester on fiesta to youtube channel. Those videos might help you. Good luck..:-)
Hi again Handyguy62 I think we have cracked it I downloaded the car manual and it says it's the immobiliser so i will put it down to that, so thanks again for your help and if I have another problem I know where to come. Thanks again Gary
why is it showing dte as 186 ?bro i know what dte is. What im asking is actually it can run 300 kms as the main display shows. why is it showing only 186kms inside the small display.
Error code format is "dtc XXXX" (XXXX is the number of code) if no error code is present "dtc none" message is displayed. You can do the test again if you see "dtc none" that means there is no error code. Other messages have different meanings.
help. i changed my battery and my 2006 ford fiesta tdci ran well. I parked the car off and tried to start it the next day and it refused to start (crank) All the dash board lights are on just no crank. checked the starter (bridged) it . checked all the fuses even next to the battery. still no crank, help please
Measure the battery voltage it must be above 12 volts. Check the capacity (amper) or charge of your new battery those may not be enough to start your car. New batteries should be charged before installing to a car. Also you should check battery terminal sockets and cables those might be loose or dirty which limits the current flow. If you still having problems you may try starting your car using jumper cable connecting to another car. If it starts with jumper cable that brings in mind that your new battery or your charging system(alternator) is faulty, there is a video of mine explaining how to check battery and charging system also checking battery voltage and the charging voltage on the dash board display of Fiesta. I believe those videos will be helpfull to you. Wish you good luck...
Hello! How can i display the fuel consumption?
Hi on occasions all dials on cluster just go off when driving ,any ideas of prob cheers
Hi, I suggest you perform the test as described in the video to see if there are any error codes, cheers.
is that er0120 at 0:29 an error code? I see the same on my car.
I have same car.... The parking brake icon is always on.... Whilst driving too.... What may be the cause???
Low brake fluid
My ford fiesta showing powertrain light flashing on dishboard so cannot goes rpm above 3, I replace 2 injector but on driving 50 km same problem comming what I do?
Thanks, will let you know if I find out anything in the manual... Gary
Hi handyguy62 not at the moment I haven't had time yet will try at the weekend thanks for your intrest
You're wellcome. To understand whether or not the problem is related with any of the keys you have, you may try starting the car with the keys one by one and observe if the alarm turns on with one of keys or with all of them. Cheers...
can this method be used to show mpg ?? i dont have stock stereo or a button on my indicator
To learn average fuel econpmy in miles per UK gallon, you should press odometer button until you see "rAFEXX" (rolling Average Fuel Economy) here XX stands for UK galon of fuel consumed.
Hello, I get "er 1501" on the cluster, is this a dtc code? Also, my "hill descent" and "water in fuel filter lights" symbols don't light up at all in the LED tests. Is this a problem? The symbols can be found on this google image link below. Symbol number 41 and 47. My engine DTC codes are p2160, p0707, and p2802.
139946-dashboard-instrument-cluster-warning-lights-what-each-symbol-means.html
P2160 - Vehicle speed sensor 2 circuit low voltage.
P0707 - Transmission range sensor circuit low input.
P2802 - Transmission range sensor B circuit low.
Hi Handyguy62 I only have one key which is only a flat one with no battery, had a look at the error codes everything seemed ok, will have to find someone with a hand book. Cheers
Hi Gary, thanks for the update. Having no error codes is good news. The key you have is the spare key without remote but still has a chip inside to communicate with the PATS system to start the car, if you have one key at the moment don't lose it otherwise it may cost you a lot to start your car again! You can download user manual of your car from Ford official website in pdf format. Cheers...
what does all that mean?
Hi just brought a Ford Fiesta zetec 1.4 2003 there is a light come on in the dash board orange flashing with the outline of a car with a padlock running though it,once I turn the key it goes off any ideas. Thank
Hi, "yellow" warning lights means something needs to be serviced or repaired soon. Based on your picture description it should be "gas cap" warning light. The check gas cap light indicates that the gas cap is not tightened properly. I hope this info hels you, Cheers.
Damn this is a very good tip! thanks.Between, i would like to know if the belt light works in your car, i have a ford 5 phase 2 1.4 tdci ghia, but don't know if i have this program Inside.?
You're wellcome. I'm not exactly sure which light you're referring to? But with the test procedure shown in the video you can see al lights working on the display. Of course, you can try and see if you have program on your car..:-)
I meant, if we forgot to fix the"seat belt", does it make noise (like Bip bip bip...) or the light display activate, or nothing at all?
And i have another question about the steering Wheel of this car, the steering Wheel is hard to turn (i had a Twingo 2 before). They told me it's normal because it's not an electric rotation. For you, what do you think ? And compared to a Dacia car ? because i had a Renault car which they use the same steering Wheel as Dacia. thanks for your answers .
During maneuvering (i.e parking) steering may seem hard to turn.That's why most cars have electrical or hydraulic systems to make turning steering easy. I'm using both Ford and Dacia they are not very hard to turn, Dacia is little bit harder as tyre size and area touching the road is larger so there is more friction. If the front tyres not inflated to normal air pressure it also makes turning wheel harder. I hope these answers help you. :-)
Exactly ! the Ford have a hydraulic steering Wheel, and while parking it's very hard to turn in my case. Dacia have an electric steering. So if you think Dacia is more harder , then i have a problem in my hydraulic system. Or in you Dacia...You didn't tell me about the seat belt."I meant, if we forgot to fix the"seat belt", does it make noise (like Bip bip bip...) or the light display activate, or nothing at all?"
Hi my 2007 fiesta has hesitation I’ve changed the coil pack spark plugs cleaned the throttle body sensor and oxygen sensor but still have a hesitation any idea why? It’s manual and in all gears, it was in neutral but that’s gone now, could it be back pressure from a blocked catalyst converter?
If you can do OBD-II testing probably you may catch a clue (error code) about the problem.
turn off the ignition disconnect the MAF sensor then start and try
How do u turn of traction control
This model has no traction control...
Hi thanks for quick reply went out and tried the filler cap every thing seemed tight and fitted correctly but it still flashes until I turn the key on, I did say it was a orange light but in fact it's red. I asked someone at work who thought it was the car alarm but I don't think there is one fitted.
Any more ideas. Thank Gary
Red colur with car and a padlock shape should be "Passive Anti Theft System (PATS)" indicator. There might be some issues about PCM system recognizing your key (there is a transponder chip in the key communicating with PATS so the car recognizes its key and wont start with some other unauthorized duplicated key) but usually in this case light stays on and car doesn't start if it starts there might be some other issues even a bad grounding. I don't want to speculate more and confuse you at this stage, to be more specific more data is needed. There are plenty of videos posted on "PATS light" problems those videos might be helpful to you. Wish you the best...
One other thing, in your case there shoud be an error code generated, did you check for error codes as described in the video or by using an OBD-II dignostic tool ?
Hi Gary, is there any progress solving the problem?
how do you reset the engine light my oxygen probe was faulty put a new one in and still stays on
At a repair shop or a service to reset the error codes a computer with specialized diagnostic software is connected to "OBD-II" connector of your car and error codes analyzed and cancelled. Ofcourse they will charge you for this job. (Ford Fiesta OBD-II connector is located underneath the steering column with a cover on it.) Not to be charged I doerror code cancelling myself using an "ELM" series dongle by using the software comes with it. The software must be loaded to the smart phone and the dongle and phone must be paired for bluetooth communication. I have loaded several videos about using "ELM" OBD-II tester on fiesta to youtube channel. Those videos might help you. Good luck..:-)
What is error cod123?!Thanks
hai my fiesta intake modiful get hot no 2 what problems that please help me to fix that
Sorry, I didn't understand the question...
Valve not running correctly need top overhaul
Hi again Handyguy62 I think we have cracked it I downloaded the car manual and it says it's the immobiliser so i will put it down to that, so thanks again for your help and if I have another problem I know where to come. Thanks again Gary
You' re wellcome, glad you've nailed it ! Wish you the best and take care.. :-)
why is it showing dte as 186 ?bro i know what dte is. What im asking is actually it can run 300 kms as the main display shows. why is it showing only 186kms inside the small display.
It is "distance to empty (dte)" means the distance you can travel until fuel tank is empty.
I would like to knw something. .my car is got the problem
What doe er0118 means,? showing in my Fiesta
Error code format is "dtc XXXX" (XXXX is the number of code) if no error code is present "dtc none" message is displayed. You can do the test again if you see "dtc none" that means there is no error code. Other messages have different meanings.
2006duratec petrol model meter avasyamund..
How to get vin code ford fiesta
If you look from outside of the car from the driver side ,i t is displayed at the lower left corner of the windshield.
Hei what that 00 is for ?
If there is an error code it is displayed as, "dtc___" if no errors "dtc none" is displayed.
How to reset servis light?
I would use an OBD tester that is capable of reading error codes and erasing them.
Fuel pump location on the fiesta?
In the engine bay, if you watch my "v-belt changing" video you can see the fuel pump at the lower rear side of crankshafft pulley.
Corey ZS
Devinder Singh yes?
Fuel pump location inside tank
My fuel gauge not showing
The gauge or sender unit in the fuel tank or electrical connections, broken wires might be causing the problem. I hope this helps!....
In my ford fiesta the meter automatically shows blank and race no working on that time plzzz help
Hi, I would try using OBD-II tester to to figure out what's wrong with the car.
my ford fista (cluster) right indicator light and fule light on after few minuets when car off and key out of ignition ..
Nur Fehlercodes des Kombiinstrument werden angezeigt!!!
Danke für den Kommentar. Ich habe die Entdeckung gemacht. :-)
That's not a mark 6 🤦🏻♀️
help. i changed my battery and my 2006 ford fiesta tdci ran well. I parked the car off and tried to start it the next day and it refused to start (crank) All the dash board lights are on just no crank. checked the starter (bridged) it . checked all the fuses even next to the battery. still no crank, help please
Measure the battery voltage it must be above 12 volts. Check the capacity (amper) or charge of your new battery those may not be enough to start your car. New batteries should be charged before installing to a car. Also you should check battery terminal sockets and cables those might be loose or dirty which limits the current flow. If you still having problems you may try starting your car using jumper cable connecting to another car. If it starts with jumper cable that brings in mind that your new battery or your charging system(alternator) is faulty, there is a video of mine explaining how to check battery and charging system also checking battery voltage and the charging voltage on the dash board display of Fiesta. I believe those videos will be helpfull to you. Wish you good luck...