0:00 intro in to (part 2 ) Day 2 (where are we at?) 01:05 Let get to work on the QS 138 90h Motor brackets. 03:42 Fitting the Motor brackets to the QS Motor.( test fit.) 05:02 My new sprocket for the rear wheel. 05:22 My New Dirt tyres front and rear. 05:36 removing fork stickers. 06:48 Removing wheel stickers 07:42 turning the struts in the yolks. 08:34 My day ends. Plans for Next day. 10:24 Dealing with the UKs storms while building this electric dirt bike. 10:43 Day 3 finally a break in the weather. 11:26 Test fitting new rear sprocket and aligning the motor up. 13:14 cleaning the frame and cutting Motor brackets ready for welding. 15:25 Test fitting new motor mounts. 15:42 Tac welding motor mounts. 16:07 QS138 90H Motor installed. 17:01 Finishing touches to the end of my day. 17:37 Femoving fairing Stickers. 18:22 The poor mans stark varg. 18:36 Day 4 plans for the day. 18:45 I made the chain and is fitted. 18:58 Removing wheels. 19:36 Fitted rear sprocket and retainers. 19:50 New tyres fitted front and rear. 19:55 what it looks like. Make sure you fit your chain properly. 20:35 subscribe. Like. And share. Thank you 21:19 whereabouts should I stick my light? 21:53 Outro see you in the next one Subscribe.
Can that motor come out easily or is it a wiggle job? I would've welded in one side had other side removable with bolts etc to help removing doesn't look like much clearance good luck though looks good can't wait to see it finished 👌🫡🎉
@@298CRE8 yeah I did think of doin that. I’m not likely goin to take it out. If I had of bolted it down, it would’ve likely have come loose. I didn’t want that, the amount of torque that the engine or produce. I can take it out if needed to. Cheers dude. Yeah me too. 👍🏼💀
@@Fpvfreaky Fingers crossed don't have any issues having to remove for any reason once all assembled doesn't look like will be much room I take it battery will be as low as possible near the motor to keep weight centralised in cradle? Have you had the motor apart to check any internal components iknow on the 1st and 2nd gens they've had various issues not taken apart any v3s yet hope to have one in a quad sometime next year.
Looking really good mate. No surron could touch this on performance. That rolling chassis with 100v at 320 dc amps through a motor that can easily handle it, is much better than a stark varg in my opinion.
0:00 intro in to (part 2 ) Day 2 (where are we at?)
01:05 Let get to work on the QS 138 90h Motor brackets.
03:42 Fitting the Motor brackets to the QS Motor.( test fit.)
05:02 My new sprocket for the rear wheel.
05:22 My New Dirt tyres front and rear.
05:36 removing fork stickers.
06:48 Removing wheel stickers
07:42 turning the struts in the yolks.
08:34 My day ends. Plans for Next day.
10:24 Dealing with the UKs storms while building this electric dirt bike.
10:43 Day 3 finally a break in the weather.
11:26 Test fitting new rear sprocket and aligning the motor up.
13:14 cleaning the frame and cutting Motor brackets ready for welding.
15:25 Test fitting new motor mounts.
15:42 Tac welding motor mounts.
16:07 QS138 90H Motor installed.
17:01 Finishing touches to the end of my day.
17:37 Femoving fairing Stickers.
18:22 The poor mans stark varg.
18:36 Day 4 plans for the day.
18:45 I made the chain and is fitted.
18:58 Removing wheels.
19:36 Fitted rear sprocket and retainers.
19:50 New tyres fitted front and rear.
19:55 what it looks like. Make sure you fit your chain properly.
20:35 subscribe. Like. And share. Thank you
21:19 whereabouts should I stick my light?
21:53 Outro see you in the next one Subscribe.
Noice, I think headlight would look good where you first had it. Please may I have 1st ride? 😂
Errrr no you can’t 😂🤣 yeah that’s where I was thinking of putting it. Where the headset is yeah.? In the middle.?
Brother you need a vise! All of that cutting/grinding bent over to the ground was killing me lol
@@rnastyboii haha yeah I’ve got one I’ve just not set it up yet. All work in progress. Sorry about your back 🤭 cheers for your comment . 👍🏼😁
Can that motor come out easily or is it a wiggle job? I would've welded in one side had other side removable with bolts etc to help removing doesn't look like much clearance good luck though looks good can't wait to see it finished 👌🫡🎉
@@298CRE8 yeah I did think of doin that. I’m not likely goin to take it out. If I had of bolted it down, it would’ve likely have come loose. I didn’t want that, the amount of torque that the engine or produce. I can take it out if needed to. Cheers dude. Yeah me too. 👍🏼💀
@@Fpvfreaky Fingers crossed don't have any issues having to remove for any reason once all assembled doesn't look like will be much room I take it battery will be as low as possible near the motor to keep weight centralised in cradle? Have you had the motor apart to check any internal components iknow on the 1st and 2nd gens they've had various issues not taken apart any v3s yet hope to have one in a quad sometime next year.
Looking really good mate. No surron could touch this on performance. That rolling chassis with 100v at 320 dc amps through a motor that can easily handle it, is much better than a stark varg in my opinion.
lol yeah you know bro. It’s gona be a lil bit crazy to say the least 🤣😂