Wow, I was just wondering today how to change bars on these new bikes. What a phenomenal step by step instructional video. Harley put a lot of engineering to these models to make the bar change so much easier. You've got a new subscriber!! Well done sir. I cannot give this enough likes
Dude that is amazing video I am somewhat a mechanic but not on motorcycles I had it the whole thing done handlebars installed everything in 2 hours with your video help you are simply just totally amazing thank you for everything it saved me $850 but Harley was going to charge
Great Video! I was able to do the clutch cable without removing that pin (my snap ring pliers wouldn't fit anyway), but could help someone who is worried about that part.
Excellent Video! One thing I would like to add is that the handlebars can be adjusted with the fairing in place by removing the cell phone tray, it just slides out. With the tray removed you have access to the riser bolts.
For future handlebar adjustments, example repositioning the handlebars after new seat install, does the entire fairing have to be removed or just the plastic fork lock cover? Thanks.
Just put the 10” Patriots on my 24 SG last night. It can be done without removing the inner fairing completely with a little bit of finessing but definitely more of a pain.
I just sub to your channel.... great install video..... I'll get with you for my 2024 Road Glide.... I seen you at Foothills Mall for the Smoky Mt Harley-Davidson Bike week..... I got you on som of my videos I did
This is a great video. I was able to complete the job in about 4 hours going real slow. One problem those is that the the clutch and brake lever mounts have about a 1/8" or 1/16" inch gap. The controls arent moving but there is a gap. Any idea ??
Great video. I have purchased the 12” Bison’s and I’m so looking forward to getting them swapped. Harley says they charge 7 hours labor and wants $900. I am in Indianapolis, any suggestions on somewhere I can get them installed cheaper without voiding warranty?
Fantastic instructional video. The only comment is the lighting. I think with good video lighting the process would stand out even more. Have FLHXSE CVO 2024 Q : how much time does it take to perform the full process ? Q : Any idea how much time it will take to re-adjust the handlebar once fully installed (including the fairing) ? Q : Are there any differences with the installation of 12" Bison Bagger or 12" Patriot Bagger ? Thanks for your reply - Greetings from Belgium - Europe
Can you still use the stock mirrors with these 12" bars, like can you see them? Looks like it. I had 12" bars on a 23 street glide and with that older design you couldn't see the mirrors at all, they were perfectly blocked.
High Occtane H.D. is putting the patriot bagger 12" on m 2024 CVO StreetGlide having hard time with the brake line telling me need to put 4" extended brake line for a safer & better looking Job. i have been waiting since February
Hey man. I hate to hear that they are trying to sell you on that. We have probably done more of these than anyone in the country, ive never changed the brake line. Even up to 14" with stock brake line
My name is Reinaldo, I have a pearlescent white Street Glide 2024, I live in Brazil in the city of São Paulo and I would like to buy this handlebar, how much does it cost and if you ship to my country?
Yeah it’s bundled with the handlebar. Go to the product page for the handlebar style you are looking for and you can select yes or no on the clutch cable
I find it funny how they state you don’t need to change cables will the bars yet on the install video they use a different clutch cable upper. How about a video showing you bending that hard casing clutch line…
Point it out if I’m wrong but where is it stated that you don’t have to change the clutch cable on this bike? Pretty cut and dry on bending the stock one. Just form it/manipulate it until it fits the new geometry. You will still need the clutch extension if that’s the route you choose, which is stated. It’s just a lot cleaner and the same money installing a flexible upper
@@williamjurgenson3502 they are making them custom for us right now. They had hoped to have them available for mass production in 4 weeks. I have a lot of inventory built up in house. I have them bundled with the street glide bars for the 23cvo/24 street glide on the website
Can the 3 piece Bars be installed on the 2024 CVO ST and installing 3” riser and 14” bars? I had a 2018 Road Glide Special 14” bars on it I want to go up 16” equivalent on the 2024 CVO ST using 3” riser 3 piece KST bars and be at what the 2018 would be if installing 16” bars on it. Will I need to add extensions going with down and using 3” KST riser and 3 piece bars at 14”?
![ROSÉ (로제) - number one girl [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/A9oByH9Ci24/mqdefault.jpg)
Wow, I was just wondering today how to change bars on these new bikes.
What a phenomenal step by step instructional video.
Harley put a lot of engineering to these models to make the bar change so much easier.
You've got a new subscriber!!
Well done sir.
I cannot give this enough likes
Thank you sir
Thank you sir just put the bison on my 24 SG as always great job explaining step by step. Appreciate your customer service second to none.
Dude that is amazing video I am somewhat a mechanic but not on motorcycles I had it the whole thing done handlebars installed everything in 2 hours with your video help you are simply just totally amazing thank you for everything it saved me $850 but Harley was going to charge
Great Video! I was able to do the clutch cable without removing that pin (my snap ring pliers wouldn't fit anyway), but could help someone who is worried about that part.
@@chrisparks9118 yeah I need to reshoot that whole process it can be done much easier than how I explained it here. I learned that tipafter the fact
This is the most on point video I’ve seen. I’m glad you’re here. 🤜❤️🤛
@@TheOnlyDjMikeStone call us if you need further assistance
You can do the adjustments without the fairing removal. Remove the tray and trim piece and then with a ball bit, you can tighten or loosen the risers
@@knoxlogic82 yes sir! We figured that out after the fact lol I appreciate you commenting for others
Excellent Video!
One thing I would like to add is that the handlebars can be adjusted with the fairing in place by removing the cell phone tray, it just slides out. With the tray removed you have access to the riser bolts.
Thanks for the insight. We did figure this out after the fact as well 😂. I need to post a separate video showing that
@kstkustoms1324 please do!
You can actually adjust the handlebar angle after complete assembly by simply removing USB drawer. It will give you perfect access to adjustment bolts
Good to know! Any tricks to removing the USB drawer?
@@djs022867 no tricks, just give it a little tug.
@djs022867 honestly, it's kinda flimsy. Just keep pulling it firmly past the stop and it should pop out.
For future handlebar adjustments, example repositioning the handlebars after new seat install, does the entire fairing have to be removed or just the plastic fork lock cover? Thanks.
Call me. 678-378-5036
We figured out a way to do it without tearing the whole thing back apart
Just put the 10” Patriots on my 24 SG last night. It can be done without removing the inner fairing completely with a little bit of finessing but definitely more of a pain.
Did you use the stock clutch cable. If so how did rebending it go?
How much taller are the 10” compared to the stock bars?
@@gp62902 The 10 will come probably even with the top of the fairing ,
I just sub to your channel.... great install video..... I'll get with you for my 2024 Road Glide.... I seen you at Foothills Mall for the Smoky Mt Harley-Davidson Bike week..... I got you on som of my videos I did
This is a great video. I was able to complete the job in about 4 hours going real slow. One problem those is that the the clutch and brake lever mounts have about a 1/8" or 1/16" inch gap. The controls arent moving but there is a gap. Any idea ??
Great job, thanks for the install video
you guys are the best!!! see you in Daytona
Great video. I have purchased the 12” Bison’s and I’m so looking forward to getting them swapped. Harley says they charge 7 hours labor and wants $900. I am in Indianapolis, any suggestions on somewhere I can get them installed cheaper without voiding warranty?
What did u end up doing??
Would you recommend replacing the handlebar riser bushings, ideally with polyurethane bushings when you are changing the bars?
Fantastic instructional video.
The only comment is the lighting. I think with good video lighting the process would stand out even more.
Have FLHXSE CVO 2024
Q : how much time does it take to perform the full process ?
Q : Any idea how much time it will take to re-adjust the handlebar once fully installed (including the fairing) ?
Q : Are there any differences with the installation of 12" Bison Bagger or 12" Patriot Bagger ?
Thanks for your reply - Greetings from Belgium - Europe
Can you still use the stock mirrors with these 12" bars, like can you see them? Looks like it. I had 12" bars on a 23 street glide and with that older design you couldn't see the mirrors at all, they were perfectly blocked.
They will still be blocked a little bit but you can see more of these than the 14-23 models
I got rid of the stock mirrors and went with stock Night Train mirrors they look great and they were pretty cheap
You have to purchase new lids from Harley Davidson? When will the cutting kit be available?
?
Be nice to have torque specs for the controls. Just to make it a little easier.
Do you still have to remove the brake lines from tray if you are only doing the 12s?
@@denniscelata3429 no you won’t have to
High Occtane H.D. is putting the patriot bagger 12" on m 2024 CVO StreetGlide having hard time with the brake line telling me need to put 4" extended brake line for a safer & better looking Job. i have been waiting since February
Hey man. I hate to hear that they are trying to sell you on that. We have probably done more of these than anyone in the country, ive never changed the brake line. Even up to 14" with stock brake line
How much longer of an upper clutch line was used from Magnum? What is the size of stock and the size of the magnum upper?
In the 2024 street glide video. How tall were those bars that you used?
12”
So you only need a longer clutch cable for 12 inch everything else will work ok ?
As stated, that is Correct.
I just got a 24 SG and looking to change the bars. Are you going to be at the Myrtle Beach rally next month?
Yes sir. We would love to do this for you. Call 678-378-5036 and I’ll write up an appointment
How tall are you? Going to get these but can’t decide on 12” or 14”. Great vid, thx. Just subscribed!
@@dfunklegendfontdawg5023 6’1”
Do the 14 inch bars have the same process? Is the clutch cable the only one that needs to be changed?
Yes
Whats the length of upper clutch cable required to run a set of 14” patriot baggers? I bought a set from your website.
43” I believe
I need some 8” bars for my 24 street glide please help me
@@alexquevedo831 stock is 8”
Did you just use the 4” over clutch extension?
I replace the upper clutch cable. Watch the video I go over it in detail
My name is Reinaldo, I have a pearlescent white Street Glide 2024, I live in Brazil in the city of São Paulo and I would like to buy this handlebar, how much does it cost and if you ship to my country?
@@dinho3296 proceed through the checkout process on our website and it will give you the total landed cost
@@dinho3296 kstkustoms.com
Do you sell the extended clutch cable
Yeah it’s bundled with the handlebar. Go to the product page for the handlebar style you are looking for and you can select yes or no on the clutch cable
Can you sell just the cable? My friend already bought Fat Bagger 12” bars but didnt know about having to replace the clutch cable
@@hdrider6303 sure. $150. Call the office at 770-537-9133.
Ok.. thanks!
I find it funny how they state you don’t need to change cables will the bars yet on the install video they use a different clutch cable upper. How about a video showing you bending that hard casing clutch line…
Point it out if I’m wrong but where is it stated that you don’t have to change the clutch cable on this bike? Pretty cut and dry on bending the stock one. Just form it/manipulate it until it fits the new geometry. You will still need the clutch extension if that’s the route you choose, which is stated. It’s just a lot cleaner and the same money installing a flexible upper
Whos clutch cable did you use?
We have them. We buy them from magnum shielding
Huh, they dont have them on their website yet. Do you have a link to them?
@@williamjurgenson3502 they are making them custom for us right now. They had hoped to have them available for mass production in 4 weeks. I have a lot of inventory built up in house. I have them bundled with the street glide bars for the 23cvo/24 street glide on the website
Thanks for the info
I’m so glad I found this video. Thank y’all so much for posting! So the wiring pulled from the stock bars is long enough to re-use in 14” bars?
Can the 3 piece Bars be installed on the 2024 CVO ST and installing 3” riser and 14” bars? I had a 2018 Road Glide Special 14” bars on it I want to go up 16” equivalent on the 2024 CVO ST using 3” riser 3 piece KST bars and be at what the 2018 would be if installing 16” bars on it. Will I need to add extensions going with down and using 3” KST riser and 3 piece bars at 14”?