Thanks for explaining about the stabilizer bar! Mine came loose and bent into a V. Other videos mention it but you are the only one I found that details how to replace it. Thanks!
I’m glad I could help! Thank you for watching and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
Replaced my tired old deere stx38 with one of these. Getting the deck off of that thing was a nightmare. Was going to pop the deck orf to put wome slip plate on there, now i know exactly how ha. Thanks!
I'm glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!
I removed the deck and cleaned it, but then after i put it back, I am seeing the engine turn off when I engage the blade. That happens only at the highest level, as I keep moving down, it does it stop the engine. I also feel the vibrations increase as the levels go up. Any idea what I might be doing wrong? I am planning to take off and install it once again just to make sure I am doing it properly.
I'm glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!
I’m glad it was helpful! Thank you for the kind comment. Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated! Thank you for watching:)
Do you have a video showing how to replace the dash cover?..something fell on mine & busted a piece off where the throttle lever comes up out of it...I have a new dash piece
Great information,Brad, I have a question,do you have a video how to remove a 2012 John deere tractor D110 engine?I love my John deere tractor and I don't want to buy a new one, you helped me rebuild the mower deck buy watching your video and other parts, but thank you for that video,thanks Mack.
I do not at this time. It is much easier than you may think. Four bolts with hardware, hold the engine to the frame you must disconnect, fuel line, throttle cable, muffler, cable to the starter and the electrical connection between wiring harness and engine, which is just a plug on both, take off the engine double pulley underneath and the four nuts that hold the engine on and pull it off. I don’t remove engines very often because most people will not pay to have them repaired. I will make a mental note to perform that task with another machine to possibly be able to help you out but it will not be for a while not sure when we’ll have a machine to be able to perform it.
Another absolutely great video on how to uninstall / reinstall a mower deck on a riding mower
Thank you!
@@JohnsonsSmallEngines your welcome Brad 👍😎
Thanks for explaining about the stabilizer bar! Mine came loose and bent into a V. Other videos mention it but you are the only one I found that details how to replace it. Thanks!
I’m glad I could help! Thank you for watching and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
Replaced my tired old deere stx38 with one of these. Getting the deck off of that thing was a nightmare. Was going to pop the deck orf to put wome slip plate on there, now i know exactly how ha. Thanks!
I'm glad it was helpful!
Excellent video. Each step required for removal thoroughly explained. I was having issues with the stabilizer bar but you explained it perfectly.
I'm glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!
VERY Well Done Young Man.... Excellent Video
Thank you kindly!
Great instructions on the video! I always grease the spindles, and sharpen the blades, and check the deck being level when complete. Thanks!
I'm glad it was helpful! Thank you for watching.
I removed the deck and cleaned it, but then after i put it back, I am seeing the engine turn off when I engage the blade. That happens only at the highest level, as I keep moving down, it does it stop the engine. I also feel the vibrations increase as the levels go up. Any idea what I might be doing wrong? I am planning to take off and install it once again just to make sure I am doing it properly.
Thank you very much. This was really helpful
I'm glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!
@JohnsonsSmallEngines I will
Glad I found you lol I have a 24k54 needs some tlc
Excellent video! Really helpful much appreciated!
I’m glad it was helpful! Thank you for the kind comment. Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated! Thank you for watching:)
Do you have a video showing how to replace the dash cover?..something fell on mine & busted a piece off where the throttle lever comes up out of it...I have a new dash piece
Did that mower have belt guide on the clutch pulley? I’m having trouble getting mine back on I have a Husq LGT2654 mower
The machine is no longer with me and I cannot remember for one machine to the next. Models are different, so I hope you can figure it out.
Any chance you know if the mower will still run without a deck? Before I remove the deck and find out the hard way?
Yes it will run without the mower deck.
Great video
I’m glad it was helpful and thank you for the kind comment.
Great info!
Glad it was helpful!
Great information,Brad, I have a question,do you have a video how to remove a 2012 John deere tractor D110 engine?I love my John deere tractor and I don't want to buy a new one, you helped me rebuild the mower deck buy watching your video and other parts, but thank you for that video,thanks Mack.
I do not at this time. It is much easier than you may think. Four bolts with hardware, hold the engine to the frame you must disconnect, fuel line, throttle cable, muffler, cable to the starter and the electrical connection between wiring harness and engine, which is just a plug on both, take off the engine double pulley underneath and the four nuts that hold the engine on and pull it off. I don’t remove engines very often because most people will not pay to have them repaired. I will make a mental note to perform that task with another machine to possibly be able to help you out but it will not be for a while not sure when we’ll have a machine to be able to perform it.
@@JohnsonsSmallEngines ok thanks Brad I appreciate it very much.
Nice video. Thanks
Thank you for watching, commenting and supporting my channel!