Man, the leds did´t work on the ch3... i want to turn on and off on 3ch, but dont work....can you help me to setup this? i wanna use the tamiya leds simulator.... thanks
Yes, the level of control is improved 10 fold and you can link it up to 15 separate receivers, I now have 3 rigs running from it soon to be 4 😊 You'll need an esc also. I use these cheap 20/30 amp ones www.ebay.co.uk/itm/164310320741
I got a couple of these too, very good value and function, works great with the fast buggies too. Just gotta figure out some fun stuff to do with Ch4 xD Nice vid
I dont know how wpl make them for so cheap! Just imagine how much a 2 speed gearbox would cost for a 1/10th rig 😲 that's why I've grown very fond of these trucks indeed. You could get a light switch to go between the lights and receiver for a on/off function or because the button press rotates a servo 90° you could have a folding rear bed tailgate.
I just got my transmitter/receiver and my receiver led isn't turning on and its not paring but power is running though the receiver should i get a new one? Or try and fix it?
On the receiver negative is on the outside, pins facing up works for me, Esc is channel 2 Bind plug in 3 Hold the bind button on tx whilst turning it on. Power down everything. Then remove bind key from 3, add servo to 1 and off you go 😊
Hi, nice review! I have a question regarding the steering adjustments that are possible. is "steering dual rate" to adjust the steering angle? Is this also useful to protect the servo ? So EPA for steering is not possible? Does it needed anyway or is St. dual rate sufficient. I am a bit confused since I just started into this new hobby. But I am searching for a good but not to expensive Transmitter/receiver combo without missing important functions... :-)
Yes steering dual rate sets how much angle the servo travels, the epa (end point adjuster) can be used to fine tune that angle, the ax6s doesn't have an epa setting, the hobby porter hp007 has lots of bells and whistles and is very well priced 😊
@@THYC thank you so much... another cheap transmitter that is often recommended is the DumboRC X6. Looks similar to the AX-6S...Do you have also experience with the X6?
Easily over 100m bud 👊😊 I dont venture to far from my rigs being a trail rider. These are selling for as low as £14 on aliexpress currently 😲 Awesome performance for a budget combo I must admit.
I've heard very good things about the gt3b! I haven't had one myself yet bud. It's a 3 channel as opposed to the austar ax6 4 channel, receivers are cheaper for the austar also. The gt3b is a digital transmitter allowing for pin point adjustments, the ax6 doesn't have steering EPAs.
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
Nice tutorial m8! Oh my... Is that my B14 video running there in the background?
Cheers bud 👊😊
It is yes! I'm adding the link to the description now 👍
@@THYC Cheers! :)
Thanks man i just Buyed one because o saw your vídeos and very pleased with them
Absolutely love my ax6, you can also use the ax5 3 channel rx with it 😁
Very nice ! Pretty much exactly the same as flysky binding process !
Loving the decor on the tx 😜😎
Tx and tv 😉
@@THYC yes 😎😜🤭 thank you 🤘
Man, the leds did´t work on the ch3... i want to turn on and off on 3ch, but dont work....can you help me to setup this? i wanna use the tamiya leds simulator.... thanks
very informative tutorial and nice wheels!
Cheers bro 🍻
So with this new transmitter you can control multiple RC cars and with finer control?
Yes, the level of control is improved 10 fold and you can link it up to 15 separate receivers, I now have 3 rigs running from it soon to be 4 😊
You'll need an esc also. I use these cheap 20/30 amp ones
www.ebay.co.uk/itm/164310320741
@@THYC Ahh I see, thank you!
Anytime bud 👊😊
Cheers for tuning in 👍
I got a couple of these too, very good value and function, works great with the fast buggies too. Just gotta figure out some fun stuff to do with Ch4 xD Nice vid
I dont know how wpl make them for so cheap! Just imagine how much a 2 speed gearbox would cost for a 1/10th rig 😲 that's why I've grown very fond of these trucks indeed.
You could get a light switch to go between the lights and receiver for a on/off function or because the button press rotates a servo 90° you could have a folding rear bed tailgate.
Great review! Keep up the videos!!
Cheers bud 👊😊
Not the best at reviewing, practice makes perfect 😂
I just got my transmitter/receiver and my receiver led isn't turning on and its not paring but power is running though the receiver should i get a new one? Or try and fix it?
On the receiver negative is on the outside, pins facing up works for me,
Esc is channel 2
Bind plug in 3
Hold the bind button on tx whilst turning it on.
Power down everything.
Then remove bind key from 3, add servo to 1 and off you go 😊
Hi, nice review! I have a question regarding the steering adjustments that are possible. is "steering dual rate" to adjust the steering angle? Is this also useful to protect the servo ? So EPA for steering is not possible? Does it needed anyway or is St. dual rate sufficient. I am a bit confused since I just started into this new hobby. But I am searching for a good but not to expensive Transmitter/receiver combo without missing important functions... :-)
Yes steering dual rate sets how much angle the servo travels, the epa (end point adjuster) can be used to fine tune that angle, the ax6s doesn't have an epa setting, the hobby porter hp007 has lots of bells and whistles and is very well priced 😊
@@THYC thank you so much... another cheap transmitter that is often recommended is the DumboRC X6. Looks similar to the AX-6S...Do you have also experience with the X6?
Cool, do ya know if the protocol is compatible with the Flysky stuff?
Honest answer is I don't really know sorry bud.
Great video about how far can you go without cut out?
Easily over 100m bud 👊😊
I dont venture to far from my rigs being a trail rider.
These are selling for as low as £14 on aliexpress currently 😲
Awesome performance for a budget combo I must admit.
Get the dumborc transmitter, those go as far as 400m
I have a flysky gt3b haven't got round to setting it up yet, have you used one and how do you compare it to this ??
I've heard very good things about the gt3b! I haven't had one myself yet bud.
It's a 3 channel as opposed to the austar ax6 4 channel, receivers are cheaper for the austar also.
The gt3b is a digital transmitter allowing for pin point adjustments, the ax6 doesn't have steering EPAs.
Great video very helpful 👍
Cheers bud 👊😊 it's an awesome bit of kit for the price!
any idea if I can use the Austar ax6s with two cars? If I get another coorisponding ax6s receiver?
I dont know how many you can bind, but I have two
Nice!
Cheers bud 👊😊
How long range the remote control??????
Easily over 100m bud 👍