First look at the most expensive modded onyx cty2.

Hi guys, welcome to the reveal of my onyx cty2
If your looking for fast sturdy bike this is for you. But for warning onyx bikes while great go into with open mind and don't get to frustrated at all the issues stock bike has. For instance my front rim had bad warp, the display would reset milage to 26.4 randomly.
From time of sale what stated 1 week lead time went to almost 3 months.
I'll try and make full list below of all the mods and links below.
All parts were purchased by me and one day I may pick up rcr but can say onyx probably won't sell to me again lol.
Thanks
Dave
Thanks to tom Zartler of z creations
Front fender z-creations-official.square.s...
Rear tail light holder z-creations-official.square.s...
Turn signal mounts z-creations-official.square.s...
Z gap filler for Athena battery z-creations-official.square.s...
Ryan dean motor stays a must first thing to replace
z-creations-official.square.s...
Powerful lithium 63v Athena battery.. Not cheap but worth it. powerfullithium.com/products/...
Adjustable cty2 charger powerfullithium.com/products/...
Michelin City Extra tires amzn.to/3rti4sX
2.75x17 47j shinko sr241 amzn.to/3ruJpuK
Tail light that fits z creations holder amzn.to/44NJB6w
Led add on front lights amzn.to/3DkBjHu
Cllena DC 40V-90V to 12V Converter amzn.to/44qSGCF
Magura USA Quick Mount Adapter amzn.to/44LIpR7
90cm Hydraulic Brake Oil Hose amzn.to/3rCgmoQ
Preston dot4 synthetic brake fluid amzn.to/3rsFm26
Turn signals pack of 4 flexible amzn.to/3NSuuSw
2pin adapter needed for magura brake sensor
amzn.to/3pOelFF
Front brake pads amzn.to/3DdDcWH
Spanner Wrench set for shocks amzn.to/43oXTtf
PIVOTRAX 70/100-17 (2.50/2.75-17) heave duty tubes.. Have at least one extra
amzn.to/3OhCNJd
Syntace Disc Shim Set for magura rotor amzn.to/3rqCEKl
Pro Taper XPS Front Brake Lever needs modding and optional amzn.to/3Y04jhy
RAM Mounts Quick-Grip XL Phone Holder
amzn.to/3rwBa1h
RAM short adjustable a.co/d/6TgkU9C
Motorcycle seat cover, I got 2 one for seat and other fits over battery case perfectly. amzn.to/3pQBlUx
BraveHawk OUTDOORS Bike Handlebar Bag x2 as saddlebags amzn.to/3JWrR0Q
Mounting brackets for led light pods amzn.to/44Q7Gd7
Volo Extender Bar for display amzn.to/43rJoVy
Invoxia Real Time GPS Tracker a must for any bike. amzn.to/46TeicC
Motorcycle Windshield, did need to shim the mounts to forks as stock thinner than moto. amzn.to/46Nx7h9
Pivoting Handlebar Clamp Risers amzn.to/46SlwgU
Rotary Push Start Button Cover amzn.to/3NSYEFk
Bicycle Rear View camera amzn.to/3NSU61M
Handlebar Lock I would not rely on by self but in combo never issue amzn.to/3pOiIk6
SUPAREE 5-3/4” 5.75 Inch LED Headlight amzn.to/3NMiAtq
LED Motorcycle Headlight Housing amzn.to/3Of2ERL
Plug HD Rear View Mirror exactly like onyx sells amzn.to/3DhMosU
LEXIVON Torque Wrench 1/2-Inch needed for axle bolts was cheap and well made amzn.to/3OqevNf
Motorcycle Dirt Bike Stand Lift amzn.to/3Q6lXho
Mountain Bike Pedals stock are garbage amzn.to/3XV6Vgy
Vinyl wrap I'm using amzn.to/46TWb63
Magura MT5e brakes amzn.to/3rtiYFR
Magura MDR-P Disc Brake Rotor amzn.to/3JZVxKz
Grin Technologies Statorade amzn.to/3NWXQzi
JQuad Do All Vacuum Brake Bleeding - Master Cylinder Bench Bleeder Kit get this instead of big kit, super simple amzn.to/3DgRxl8
Tire spoons amzn.to/43u9kjB
Permatex 25210 High Strength orange. Use on axles amzn.to/43mWH9S
There's couple links for fins etc I need to hunt and will re oragazise this hot mess later into section lol

[@Ghos7lyKarma]

That's a sweet ride you got 😮I hope it rides like a dream for you😻much love❤

[@obeii1805]

I appreciate u linking the parts etc that was so helpful brother. Did u upgrade the regeneration braking? I’m getting the brakes etc you’d linked any video on how to change to changes them I’m a noob .Also my bike keeps falling on the kickstand ? And ideal on how to fix or what to upgrade to? Thx. Can I pay you for your time if you can zoom teach me how to install and change things like the brakes n rotors? What extension bar you used too?

[@Travel_Juan]

The carbon wrap has got to go. You need to prep that surface, use water while installing, and smooth out with a plastic squeegee and a hair dryer. This will eliminate all those wrinkles... Also you mentioned you did it at night? Definitely make sure you're doing it above 65 degrees for the best results. Those wrinkles are painful.

[@user-ij1bh1vp7e]

Do you know how to find a speedometer display unit. Onyx is temporarily outta biz

[@letitiafeng8014]

Hi Dave, this is Letitia from Usuie. It's been a while since you received our product. We've sent numerous emails but haven't received any response. We kindly request you to get in touch with us.

[@STARSHADOWWOODWORKS]

I don't know who you are, please email me.

[@obeii1805]

What did u attach the camera on the rack?

[@jamesgudgeon453]

I ordered my onyx RCR july 3rd still waiting

[@STARSHADOWWOODWORKS]

Good luck. I think they are doing better with supply chain tho.

[@AllenTam]

Ok, that thing obviously loves by someone. But I would not be caught dead riding that abomination down the road or have it anywhere on my property. 😆