Respect for all the work you put into this video, but the only question i have : why for a small grinder? Change your plans a bit and fit the big grinder allowing you to cut tubing 2*2 and so on. Thanks for sharing from Mexico
for me it is better if there is no music in these videos.. the sounds from the tools are so satisfying. Of course, it's not bad to have music for a while, but it wears you down throughout the video. I, as a RUclipsr, used to put music in my early videos too, but I've found that it tires the viewer and can ruin the video you worked so hard to create. Keep up the good work, you've won my subscription. I'm sure you will climb!
I had a lot of old pipes and rebar to cut up and from what I read ruclips.net/user/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
Почему никто, делая станины, не крепит болгарку за шейку шпинделя? Это ведь просто и логично. И позволяет мгновенно снимать-ставить болгарку в раму без последующих настроек и регулировок. Дождетесь, я победю свою лень и таки сниму ролик про мою стойку.
As designed the rotation of the grinder disk pulls the workpiece toward the fence, just like a miter saw. Turning the grinder does the opposite, making it dangerous.
Very creative video and fascinating build. Thank you so much for sharing!
🤝✊👍
Great angle grinder stand. We shared this video on our homemade tools forum this week 😎
😁
Your stand is so cool man! Look really like an industrial piece! Thumbs up 👍 👌
Respect for all the work you put into this video, but the only question i have : why for a small grinder? Change your plans a bit and fit the big grinder allowing you to cut tubing 2*2 and so on. Thanks for sharing from Mexico
El hombre y su ingenio, buen proyecto.
gracias amigo
👍💁💝
😉😃👍
I'm really impressed with your design. 👍
Glad you like it
Красота, ножки и шея супер!
Согласен 😉
Maravilhoso trabalho e criatividade 👏👏👏👏👏👏👏🙏🇧🇷
Obrigado 🤝😁
Great project! 👍
🤝😁
Eso lo hará su aguela y usted yo le compro una a usted con mucho gusto lo admiro y felicito
👍😄😄😄
Прижим понравился.
😉👍
Молодец работа с душой. 👍👍👍👍👍🤝
Спасибо😊🤝, Ваш канал тоже смотрю.
Nice
😁👍
Linda y buena maquina felicitaciones.
¿Tienes planos del invento?
necesariamente
@@gsp-m-diy No entiendo tu respuesta.
Genial resultado...solo una pregunta...y donde va sentado💺🚀 el astronauta? 🤣👋👍
astronaut in the head
Thank you for your ideas.
😁🤝
DAMMIT ! Now I have to have one. I got to quit watching these type of video's !
Great Job!
thanks and keep watching
Dude, this is an excellent video, I really like your project and your shooting style, I would like to see you in better places in the coming years
Glad you like it
Harika işçilik harika fikir ellerine sağlık
Teşekkür ederim arkadaşım
Outstanding !!
😁😁😁
FANTASTIC , very good BRASIL.
😁👍
PDC. Pretty damn cool. You got mad skills there bro.
it's loud, but thanks.
Бляха, даже свет продумал. Оч круто!
😁😁😁✌️
I like it
😁🤝
Encantadora esa creación 👌
amigo de Spapsio
Wow that's great... Awesome Bro! Thanks for the idea
Good luck
Show de bola parabéns
Obrigado
How you cut 45 degree...???
There are many options, I will show you later.
Как всегда на высоте!👍
🤝✌️
very very cooool
for me it is better if there is no music in these videos.. the sounds from the tools are so satisfying. Of course, it's not bad to have music for a while, but it wears you down throughout the video. I, as a RUclipsr, used to put music in my early videos too, but I've found that it tires the viewer and can ruin the video you worked so hard to create. Keep up the good work, you've won my subscription. I'm sure you will climb!
thank you friend for the good advice, good luck to you.
Buen proyecto
Gracias
This is cool stand !
Thank you
You are amazing man.
Keep going
the road will be mastered by the walking ...
un genio!!
aplausos
🤝😄
Amazing work man 👍👍👍👍👍
😇😇😇😇😇
if you want crisp clean edges when folding sheet metal, score a small way into the sheet with a cutting wheel first.
Thank you✌️
excellent job
Thank you
You are amazing, guy!
Thank you😇😇😇
디자인도 성능도 정말 좋은 것 같아
감사합니다
Brutal machine )) 😀💪
🤝👍😄
Amazing 👍
🤝😆
EXCELENTE TRABAJO.
Gracias
Great!
🤝😁
From its humble beginnings THAT is a really nice addition to the workshop ! Enjoyable video style too = ) Good luck with the channel !
Спасибо и удачи
Muito interessante. Pode fornecer o projeto para executar passo a passo?
Sorry, this is very difficult, there is not
enough time.
👍👍👍
🤝😊
complimenti
Grazie
Overall it's a nice movie
Thank you🤝
👍👍👍🤝
✊👍
Amazing! i did something like this once but it turned out it didn't cut right so i discarded it.
mine works great
Fajne :)
😄
Hay quá 👍👍
Cảm ơn
Подписался
😁 Спасибо, удачи✊
I had a lot of old pipes and rebar to cut up and from what I read ruclips.net/user/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
Esa herramienta va a sobrevivir a las especie humana!!
Definitivamente
👏👍🤟
🤝👍✌️
Почему никто, делая станины, не крепит болгарку за шейку шпинделя? Это ведь просто и логично. И позволяет мгновенно снимать-ставить болгарку в раму без последующих настроек и регулировок. Дождетесь, я победю свою лень и таки сниму ролик про мою стойку.
Для простой и мобильной стойки это действительно идеальный вариант.
Сразу видно - наш. В гараже срач ))
😆👍
Cool😎
🤔
@@gsp-m-diy рнспект я такого еще не видел проста супер
😇😄👍
А можно как нибудь размеры получить на такой станок?
Хренс тебе мазер факер!
Зачем? Это же творческий процесс, делал под свои задачи, о размерах не думал.
@@gsp-m-diy вот такая торцовка полное хуйня, поверь мне.....забей в ютюб торцовка на раздвижных конструкций
@1:22: please tell me he's not just gonna tack weld
@1:33 oh hell no
Naturally, this is a temporary welding
Эстэт...👍
😁🤝
🥰🥰🥰🥰🥰🥰🥰
😉😆😆
Nice machine but why didn’t you turn the angle grinder the other way? Then the body wouldn’t be in the way of your fence.
it is more comfortable
As designed the rotation of the grinder disk pulls the workpiece toward the fence, just like a miter saw. Turning the grinder does the opposite, making it dangerous.
@@thardyryll everything is so, but the theory is not always compatible with practice
Công sức lớn để làm việc nhỏ
😲🤪😲
Oh I see you wanted the sparks to shooting back towards the wall my bad
for sparks i use screen blanking
@@gsp-m-diy эта штука наверно и пыль хорошо ловит
@@gsp-m-diy could you please provide more info about this spark gurd screen ?
p.s. grate job 😀
@@youwillcallmede Might be worth making a video on the subject.😁
How 45*
there are many options
Класс 🎉
ruclips.net/video/YZSEp0ow-ic/видео.html
Ну и нагородил....
🤪🤪🤪
It was terrible video editing.
how could