Это видео недоступно.
Сожалеем об этом.
Tormach Machinist Quick Tips - G28 Command
HTML-код
- Опубликовано: 17 окт 2018
- Here’s a CNC Quick Tip on using G28 within PathPilot. This command brings that machine to a clearance/loading position when it comes up in the g-code. This simple step could save time in the long run. Quick tips are meant to be fast and useful information, that will help your machining experience over time. We hope you enjoyed today’s cnc quick tip. If you have any ideas for a Quick Tip that you want covered, feel free to leave it in the comments below.
About Us:
At Tormach, we're dedicated to providing exceptionally engineered machining products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products.
Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
Join the Tormach Forums here: hubs.ly/Q029ggRV0
There are several ways to contact Tormach Technical Support.
If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0
Tormach Technical Support page: hubs.ly/Q029ghwW0
Tormach Technical Support contact: tormach.atlass...
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: hubs.ly/Q029gj8M0
Facebook: / tormach
Instagram: / tormach
Twitter: / tormach
LinkedIn: / tormach
I wish I knew that a while ago.
Thanks for the tip.
So is there a G28.2, etc., code that would allow for another position for another op?
sourcery