Do you have to ever replace the smartflo cartridge?! What does it even do. If you’re buying filtered water already…what else could it be for. Just bought this water dispenser!!
@AmandaCarmack-qo7gm 🤔Hmmm... if you're buying filtered water that cartridge would be good a loooong time. Maybe replace yearly to prevent any organic growth on filter media?
If it's a rental-provided unit like ours is (Sparkletts/Primo) then I would have your supplier bring out another unit. If you own it outright then more investigation needed. Loose fasteners, O-ring in connection, or perhaps a dispensing valve that needs replaced.
Open the top and check if the steam valve cover is filled with water. You might just need to release the water by opening the drain plug in the back of the unit into a bucket (after it's cooled down).
@Vprincess1357 Without sourcing the point of the leak I couldn't say for sure. It could be a hose, an o-ring, a seal. You'd need to disassemble it to find the issue.
It looks exactly the same. I’m not there tight now to check model numbers. I looked through that slot in the back and can see the green wire and everything although it looks like the wires are resting at a different angle. Maybe I just need to move them around and see if it is hiding somewhere behind.
If, after resetting the fuse, you still aren't getting cold water then you likely have a compressor, freon loss, or other issue going on. If it's a rental with water delivery - tell them to bring another out to replace that one you have.
If your "reset button" is pressed and you're getting hot water then you likely have a cooler issue. Could be compressor, freon loss, sensors, a switch, etc. Dunno there.
@@17oUtLaW17 I have sarcoidosis (scarring) of the lungs. Never smoked, never used drugs. None of the doctors know why - just something I have to deal with. Is what it is.
![Lil Uzi Vert - We Good [Official Audio]](http://i.ytimg.com/vi/DrSfBULAsek/mqdefault.jpg)
Oh my gosh THANK YOU!! I was going crazy trying to find away to fix this
Second reset worked like a charm. Thank you!
I’ve been looking to fix this for the longest time!! You’re a hero! Thank you sir!!!
Wonderful! Glad it worked! 👍
Thanks man!
I’ve been struggling trying to make it work with no luck and sure enough once i pressed the reset button the hot water is working again!
WOOHOO !!! 😁👍
Thank you sir! You’re the best 🎉
If one of the silver push down water tabs break off, how can I replace it?
Do you need to unplug it to hit the hot water reset pin?
@@chrislefrid5364 No. 🙂
Do you have to ever replace the smartflo cartridge?! What does it even do. If you’re buying filtered water already…what else could it be for. Just bought this water dispenser!!
@AmandaCarmack-qo7gm 🤔Hmmm... if you're buying filtered water that cartridge would be good a loooong time. Maybe replace yearly to prevent any organic growth on filter media?
Worked for me!!! Thanks!! 🎉
You're welcome!
Mine is leaking. Any ideas? Looks like it’s leaking from the top back
If it's a rental-provided unit like ours is (Sparkletts/Primo) then I would have your supplier bring out another unit. If you own it outright then more investigation needed. Loose fasteners, O-ring in connection, or perhaps a dispensing valve that needs replaced.
Open the top and check if the steam valve cover is filled with water. You might just need to release the water by opening the drain plug in the back of the unit into a bucket (after it's cooled down).
Mine leaks from the bottom very little, is that fixable ?
@Vprincess1357 Without sourcing the point of the leak I couldn't say for sure. It could be a hose, an o-ring, a seal. You'd need to disassemble it to find the issue.
It worked! Thank you!!
You're welcome!
THANK YOU SIR 👊 😎
I’m not seeing a reset button anywhere through that slot. Weird.
@@sean5354 You have the same model?
It looks exactly the same. I’m not there tight now to check model numbers. I looked through that slot in the back and can see the green wire and everything although it looks like the wires are resting at a different angle. Maybe I just need to move them around and see if it is hiding somewhere behind.
What about cold water
If, after resetting the fuse, you still aren't getting cold water then you likely have a compressor, freon loss, or other issue going on. If it's a rental with water delivery - tell them to bring another out to replace that one you have.
my dispenser does not raise the water and pours it inside
Hmm. Not sure I understand...
What about cold water not getting cold.
If your "reset button" is pressed and you're getting hot water then you likely have a cooler issue. Could be compressor, freon loss, sensors, a switch, etc. Dunno there.
@@silverstake88can you make a video on this
Same here. I pressed that button and wala presto! lol hot water works against thanks for the tip
You're quite welcome! 😁👍
@@silverstake88 it keeps giving out room temperature water. I’m going to call on Monday to replace it
Thanks man but that breathing though😅
@@17oUtLaW17 I have sarcoidosis (scarring) of the lungs. Never smoked, never used drugs. None of the doctors know why - just something I have to deal with. Is what it is.