Thank you so much, i understood the topic now as i forgot to pay attention in class by mistake😅but i love science btw, and becuz of ur videos i along with learning, i understand it too
Great video....and I'm sure you are correct....but what happened to the height at frame 10.19 (ie m xg x h) ? ...you appear to have left it out! Thanks
great videos, thanks for sharing your knowledge,,,do u have videos on how to compute the efficacy of simple machines? i watched the whole video,, i got the mechanical advantage part but i still dont know how to compute for the efficacy of machines like pulley.. ( i also watched ur video about pulley) thank you...
I think I have a mistake in your calculations. At 5:20, when you cross multiply the force input doesn't just go away, it'll still unknown. So it would have been 24/6fin and then once you do that you would get a force input of 4, not 6! Even if you didn't cross multiply and figured it out like an equation you would have gotten 4- not 6. Hope this is helpful.
He just simplified it like this: 24=6Fin Fin=6/24 Fin=4 So when you reverse it its factor (-,+x or /) reverses so yeah he is right but didn't make it clear enjoy ta!
Bro nice video .but why don't you do one long and complete video on the topic simple machines( velocity ratio, fulcrums, etc ) I prefer and understand your videos because u expain well thanks
I am interested in what app you use to explain with. I am a teacher and I struggle with explaining problem solving techniques during distance learning. I use OneNote but I find it quite annoying at times..
@@maricog658 Yeah that was my initial thought but then I checked a reference book and the definition of MA is (the magnitude of the load fore over the MAGNITUDE of the applied force) in the case of levers. Since it's saying the "magnitude" we cannot break it into its components.
im watching this after having a discussion about brains vs braun, in which i say mechanical advantage is OP and i can prove it. now im watching this to prove it
Physics PDF Worksheets: www.video-tutor.net/physics-basic-introduction.html
Full-Length Videos & Exams: www.patreon.com/MathScienceTutor/collections
i swear this guy literally knows EVERYTHING
I don't know how to thank you enough. Earlier today I hated Physics and now I am love with it? How did you do it? Thank you so much 😭 ❤
weirdo
You teach a 3 month unit with 40 min you are the greatest teacher
U didn't even ask for us to subscribe to your channel🙌🙌 your a legend
This has cured my depresion
Same for me pal
lmao
but it hasn't cure your spelling errors 😌
@@abigailabigail5086 cured*
@@vincesabales3357 lmfao
Great explanation. Thanks. Yes, friction is a counter force (negative) but it is reduce almost to cero by using rollers in the ramp.
this video helped me more than my science teacher this whole school year! thank you!
I enjoy v. which means the world isn't empty of people living in it. doing a work for another and others may do so. thanks so much
this guy is the true hero of quarantine
Frick yeah
you make physics seem so easy! Thank you so much
Physics is easy!
@@zedward7830 speak for yourself 🥴
You are a Godsend! Thank you to my favorite tutor
Thank you so much, i understood the topic now as i forgot to pay attention in class by mistake😅but i love science btw, and becuz of ur videos i along with learning, i understand it too
When u use Fin and Fout I get confused with FE and FR
OMG THANK YOU VERY MUCH THIS REALLY HELPED THANK YOU THANK YOU THANK YOU
Bro you helped me so much with my maths 3 years ago God bless you
Thank you for the video. You know reading about simple machines and the such is not the hardest, but your video provided me extra clarification.
Thanks for sharing your knowledge
it was really informative and it helped me clear all my doubts.
The most underrated channel fr.
Is friction negligible? But awesome explaination, It was so confusing in my textbook but I totally get it now! Thank you Sir!
God bless you so much,you have really helped so many people❤
Never studies for my own test during this unit when I was in that grade but I’m here for a friend
Another great class. thank you.
You know shit's about to get real when you hear "now let's think about what this means."
You’re the best 👏🏻👏🏻👏🏻
This is awesome. Very simple explanations
Pretty easy. Thanks.
Great video....and I'm sure you are correct....but what happened to the height at frame 10.19 (ie m xg x h) ? ...you appear to have left it out! Thanks
In the first question, are gonna need some modifications if the system was located in moon and has a lower gravitational field
great videos, thanks for sharing your knowledge,,,do u have videos on how to compute the efficacy of simple machines? i watched the whole video,, i got the mechanical advantage part but i still dont know how to compute for the efficacy of machines like pulley.. ( i also watched ur video about pulley) thank you...
I don't have any other videos on it at the moment. Just those based on what I can remember.
MA divided by IMA
I must say You're so great!
I literally love you bro
thanks teacher for your explanation👍
This was such a great video thank you very much
Thank you very mush I understand more than in school
Me too :(
Thanks man I have a test tomorrow and my engineering teacher is not good at teaching lol
I think I have a mistake in your calculations. At 5:20, when you cross multiply the force input doesn't just go away, it'll still unknown. So it would have been 24/6fin and then once you do that you would get a force input of 4, not 6! Even if you didn't cross multiply and figured it out like an equation you would have gotten 4- not 6. Hope this is helpful.
Yeah me too
He just simplified it like this:
24=6Fin
Fin=6/24
Fin=4
So when you reverse it its factor (-,+x or /) reverses so yeah he is right but didn't make it clear enjoy ta!
Thanks, I learned a lot!
Thank you so much friend!
Bro nice video .but why don't you do one long and complete video on the topic simple machines( velocity ratio, fulcrums, etc ) I prefer and understand your videos because u expain well thanks
Joseph Ore I agree he explains the formulas in a very detailed way, at least it's that way for me
no
@@ericarosemary4663 get lost
Who else is studying for exams lol
Me
me and it's 3am lol😢
Me who's exam is after 3hrs and watching at 2'30AM and doesn't know anything just le me who's listening dogs crying lol 😅😅😅
Here we're😂😂😂
Bro so freaking real 😭😹😹
Yeah! This helped a lot. Please make more videos like these.
I am interested in what app you use to explain with.
I am a teacher and I struggle with explaining problem solving techniques during distance learning.
I use OneNote but I find it quite annoying at times..
add a video on Constraint Motion with JEE problems. please
How do we calculate the mechanical advantage if one of the input or output forces is applied with an angle that's not a right angle???
You would have to break it up into x and y components if I’m understanding your question correctly
@@maricog658 Yeah that was my initial thought but then I checked a reference book and the definition of MA is (the magnitude of the load fore over the MAGNITUDE of the applied force) in the case of levers. Since it's saying the "magnitude" we cannot break it into its components.
I liked this soooo much
its good
i like the explaination
thank you proff.
im watching this after having a discussion about brains vs braun, in which i say mechanical advantage is OP and i can prove it. now im watching this to prove it
Great video!
Maraming Salamat Po
thank you bro❤
why the ideal mechenical advanatge is caluclated by distance while the mechanical advantage calculated by force?
6:29 couldn't we just use the principle of machines ? Which is , Load × load arm = effort × effort arm . Is it necessary to use MA formula?
Thaaaanks!!
Thanks!
Oh shit how long have a been asleep for
look at your spelling
the best
Can output force be more than input force ???
yeah, of course
❤niceee
Ty ❤️
Why are u opening the comments?
Go pay attention to the lesson
If youre done, leave some nice comments, thx bye
thankyouuuu 🧡🖤🤎💜
Baba boeeeey
I have a test today and watching thus video I realise I might not pass grade 8
Go and study kid
احا يا برو أنا مش فاهم خالث🥺
Did you use a calculator?
Because i heard you did.
@ 9:10
HAHAHAHA LOL
No matter how hard I study. Why can I not understand math problems. Why.
that is physics
🖤🖤🖤🖤
Mr. in this video
gurl I'm gonna fail 😫
Nna retlo idibala kadi lotse
this guy is very robotic although explains well