Maaaaan you made that look way too easy!!! 😊 great job tho, this is exactly what I needed to do mine. Sadly I have no lift, doing it on the ground was quite the challenge.
Thanks for posting. I have a leaky oil seal between motor and transmission so need to pull out. How long do you think the whole job took you to swap in real time ? Did you need to take the intake manifold and starter out to get the transmission out?
So you’re gonna have to get the two axles out get the long shaft out and also support the differential with the stand preferably long jackstand and then you can undo the bolts then it will come right out
I’m having same issue with our 2014 outlander sport. I have no reverse. At first it threw a code P0746 (solenoid A stuck on off position) I have cleaned the solenoids and put back on it now I have 6 different codes. Thinking the TCM is out of wack.
Holy shit that looked like a nightmare but yall made it look easy nice job. How much does something like that cost to get done my wife has a 2010 that we think needs a transmission, still trying to figure out if it's a CVT or a regular transmission though is there an easy way to figure it out
Thanks for the video I was able to replace my transmission with a junkyard unit and put it all back together... this was helpful
Thank you so much and I am glad it helped🙏
Maaaaan you made that look way too easy!!! 😊 great job tho, this is exactly what I needed to do mine. Sadly I have no lift, doing it on the ground was quite the challenge.
Thanks man, it’s actually easier when you know what you’re doing 🙏🏿🙏🏿
Thanks for posting. I have a leaky oil seal between motor and transmission so need to pull out. How long do you think the whole job took you to swap in real time ? Did you need to take the intake manifold and starter out to get the transmission out?
Depending on how fast you work it’s should take you maximum 2 days and yes you’re gonna take the intake manifold and starter out
How do you get the differential out. I’m having trouble removing the motor mount next
To differential
So you’re gonna have to get the two axles out get the long shaft out and also support the differential with the stand preferably long jackstand and then you can undo the bolts then it will come right out
Hello, tkank you for the video. I need to remove front transfer - did the oil from cvt gearbox leak out when i remove front transfer?
Just a little bit of oil came out you just gotta keep the transfer case, straight and upright
Do I need to do learning with the scanner after do the job?
No need, just erase fault and run a quick test
Is this CVT? I have the same year, but CVT, and I don't know what to do? I need new transmission too. Where can I get one?
This is not cvt, and you can get a transmission from the junkyard and any used Autoparts store.
I’m having same issue with our 2014 outlander sport. I have no reverse. At first it threw a code P0746 (solenoid A stuck on off position) I have cleaned the solenoids and put back on it now I have 6 different codes. Thinking the TCM is out of wack.
Dis is à Good jobe donne man🥵
Thank you 🙏
How many miles on the transmission?
About 120k miles
Hello, so after you replaced the transmission in Mitsubishi you do not need to program it in ECU? just replace it and drive?
Hi no program needed just replace it put oil and drive. Thank you.
How many hours of labor did it take for you to do this? Also can u bring you my car?
14 hours, seven hours to take it out and seven hours to put the new one back in
@@kayauto I am mechanically inclined. Do you think I could do this job myself? Also thank you for responding.
Hello good day
I have problem in my Mitsubishi Outlander cvt P0740 lock up solenoid
Can help me with this and give me good adviced?
Sell it inmediatelly and buy a toyota.
My honey bro you did well...
Holy shit that looked like a nightmare but yall made it look easy nice job. How much does something like that cost to get done my wife has a 2010 that we think needs a transmission, still trying to figure out if it's a CVT or a regular transmission though is there an easy way to figure it out
It’s should be cvt transmission, and its pretty easy if you follow the steps
@@kayauto yes it is thank you