Autodesk Inventor - Surface Modeling Canadian Canoe
HTML-код
- Опубликовано: 19 авг 2024
- In this video I show several surface modeling techniques in Autodesk Inventor. In fact most of the normal commands in Autodesk Inventor support solid modeling as well as surface modeling, which makes Autodesk Inventor not just a very powerful solid modeler, but a great surface modeling tool as well.
The canoe modeled in this Autodesk Inventor video is fairly easy to do for most Autodesk Inventor users. Autodesk Inventor commands used are mostly Loft, Stitch, Splines, Extrude Sweep Trim, Patch & Thicken.
When I create more complex parts in Autodesk Inventor, I like to use some surface modeling tools in Autodesk Inventor. It's good to try and learn some of them if you want to start modeling complex parts in Autodesk Inventor.
To reduce video time, I've speeded up the video about 20%, if you would like a slower version, let me know and I'll upload it.
Your video is so great!! I know how complicated it can be… Looking forward to see more videos :)
You should add audio to this clip for bginners to instruct them how you created the tangent curve and other dimensions. It will be helpful.
i mean this contruct is not fot beginners :(
Fly more recording ur an idiot
@@bubblesbroken7969 Please don't be rude to others.
Thestripper shut up nerd
This tutorial was so helpful for me, especially it has proper way for 3D sketching.. Thanks..
Very nice sir
Stunning work. Magnificent design intent.
Great work 😃 Looking forward for many more videos like this!!! Thanks 👏👏👏
Esa curva interceptada en el plano oblicuo me voló la cabeza
I thought this was an excellent and quite fun challenge to work with. My only suggestion, slow it down a bit. My problem wasn't re-creating this canoe. It was keeping up with the creator of the canoe. But props, overall fantastic tutorial.
You can change velocity to 0.25. That works
Hey there,
Been using inventor for some years now, this was very usefull!! thanks
the problem is in the loft, specifically in the second rail
Good guidance for surface modeling,....
Nice job! Thanks for sharing.
I can follow it to 5.37, the surface of the hull is ready, then you select a middle line and extrude it symmetric, we are not in a sketch, how can you extrude ?
That was great Nima, tnx a million
wish there was an adio explaining what's going on because I'm lost
Awesome! Like.
There is only one bad thing.... You did not save your model during developing ) I'd do it at least 10 times!
nice designing and it is very helping
thanx!
Many thanks! top stuff!
when im trying to loft at 4.21 is giving me error :( i ve tried it 4 times with no success
It means you are still a novice....chill you will get there......😂😂😂😂😂😂😂😂😂😂😂😂😂
Tu video me estresó un chingo, pero gracias
good tutorial! thanks!
I'm getting an error when I go to thicken / convert to solid (approx. 15:00). Are there special settings for the thicken / offset function? Anything else I need to know? Thanks
By the way, I thought the rest of the tutorial was awesome up till that point. Very informative
Can't believe tNice tutorials is free
Aynısını yapmama rağmen 4:20 deli loft komutunu smooot uyarısı yüzünden yapmıyor Inventor 2021 is very bad !!!
Wondering how one can predict the behaviour of the intersection curve option when not using faces but lines, as you do in your first use of that option..
Hi NiMa - this is a very helpful tutorial I am glad I found it...I reached 7:50 mins with no issues but when it comes to trimming the top workplanes I am stuck. I realise that the problem is that the outer-top edges of the canoe are not selectable when for e.g. I try to fillet them. This is probably why the workplanes get trimmed by the whole top surface of the boat and not the "overboard" parts only....Any tips how to overcome this, i.e. the stiched canoe surface to have "active" (for lack of better term) edges? I hope I explained the problem properly and thanks a lot
In inventor 2014, I have the same problem. But when I tried inventor 2013, there was no problem at all. Maybe that can help you.
que tal amigo, oye no puedo suprimir el plano hecho por extrusión con el comando cortar en modeldo 3d, para que ya se vea la canoa con el hueco, ya sin el plano, tengo el inventor 2015, no funciona como lo haces o me puedas de decir como
hacerlo de otra manera gracias
does someone know why the 'loft' part at 4:30 does not work with me ?
when you select the second rail make sure you select the whole line at the bottom and not just the arc. That will ensure your loft works.
when I tried to loft according to the video it doesn't works! I am Using Inventor 2015. error it shows like "the operation had problems with specified rail curves not being smooth.Try to make the curves of the rail smooth across interior vertices." Please Help.
same problem
very well done man
Without sound is insanely frustrating to try and follow, been over the video 30 + times and still no result and have no idea whats happening half the time
Agreed. A commentary would help immeasurably
This is how you do it. Thanks
So if you were to use this in a real life situation. What would you do with your model? Use it for a large mold? Can you convert this to sheet metal pieces so you can have flat patterns? I'm doing a similiar project in which I'm modeling a single sheet boat and doing it in sheet metal so we can create life size templates. Then we are actually making the boat.
Hi, question is it possible to make flat pattern of the body so it is possible to lasercut?
Nice.. :) Autodesk is the best :)
haha, true
Why didn't you explained??
It took very long time to draw and some are still unfinished..
Command Loft dosent work .I have Invetor 2016
I've spent hours rechecking all protection points, lines. Everything is exactly like yours, but I cannot get past the error below complaining that the rail curve is not smooth when I try to loft the bow. I've even tried a G2 to the bow on the Sketch2, but the G2 smoother gets a "Failed to create constraint". I don't see anyone else posting this problem. Stumped but would love to know why.
Create loft feature failed
Canoe.ipt: Errors occurred during update
LoftSrf1: Could not build this Loft
The attempted Loft operation had problems with the specified rail curve not being smooth. Try with a different rail or try to make the curves of the rail smooth across interior vertices.
+David Hoff Have you tried to tangent all the lines and curves?
+David Hoff Did you end up solving this?
@John E Great! Just simple solution solved the problem.
really wish there was audio
Hey, im trying to make a bit simpler model, consisting of straight, rectangular-ish faces. no curves. Is there a way to cut the hull in couple pieces and unfold it like a sheet metal piece?
Very helpful..Can you have a demo doing a dagger? I'm having problems doing "loft"command. By the way, having audio would be great. Cheers.
Hi, great video. This is only a surface? How do i can do it a solid piece? With thickness? Thanks
Hi. Can I please get a slower copy.
Love your vids! :D
thanx!
excellent
Can you tell how you went from a straight line to a curve while still being within the line tool (Shortcut im not aware of) when you first start creating the sketch circa 1.10 in the video
Keep LMB holded while in doing a line - and it becomes curve
Thanks simple but effective
lofting doesnt work
how does he-she switch a figure 180 degrees automatically like at : 6:14 ??
Follow construction plane handy.
im unable to trim the surface at 8:07 ? what im doing wrong ?
im selecting the canoe body as the cutting part and the extrusion above to remove , but my selection is not one by one like in the video , its the whole surface ...
KIM Kim 1st you stich the sweep part with other body then apply fillet command, it would then work
hi can i get this inventor file for study ? if you don't mind now i am really interesing in making ship though inventor for study Thx
I'm thinking about designing and building a cedar strip canoe someday. I'm wondering if after getting the shape right, can this program create cross section profiles for the forms which would be used to wrap the cedar strips? There would need to be a cross section every 12" or so.
+Matt KnowsThat Yes it can easily have the stations as planes and profile sketches. In my experience, if you are trying to fair the lines numerical, it makes a difficult job, because Inventors Bezier lines are not very good in a 2d sketch or a 3d sketch.. but the section profiles (stations) are the easy part.. regular 2d sketching on a plane.
could you tell the hot keys while you moving around mouse
F4
Shift+Alt+Mouse while hold
How do you bring the fast menu options while working? Is that a button on the mouse?
4:37 at that time there's a erro in my inventor it say that "the attempted loft oper operation had poblems with the specified rail curve not being smooth. try whit a rail or try to make the curves of the rail smooth across interior vertices."
i got the same problem, and finally fix it by checking the sketch2 and i had a line repeated so it just left the lines of the rail. hope it helps
Ok, I know its been 5 years, but I had the same issue. Things I found out. I missed the fact she projected points from one plane to another, so when I went to constrain them while drawing, there was no constraint. I also missed when doing Sketch 2, where the curved lines have tangential constraints the the straight lines. Once I redid my sketch 2, and made all the constraints match, my loft worked like a charm. Hope this helps.
thank you
Nice video. What command do you use at 4:27 to select the point instead of the curve?
It was so clever way..
I'm trying to actually model the boat, and i have problems with the fillet part
what is the actual problem?
The software does not let me do the fillet
Jorge Ibarra Hi Jorge,
Send the model to my mail adres, nima3223@gmail.com. I'll take a look at it
Okay thanks
Jorge Ibarra Did u use Inventor pro?
dimensions?
thanks!
15:00 I have a problem with setting thickness. I don't know why but Error shows up... Can you suggest some solution for that? I use Inventor 2019 and can send you my itp. file
Hey same problem here contact me as it it would help both of us.
gunner1141781@gmail.com
Thickening the canoe doesn't work. Anyone has experienced this ?
i found my solution...when i stiched the benches it stiched them on the boat , so it couldnt thicken only the canoe. I deleted the stich of the bench, to do it after the thickening part.
great. I want to draw a straight line and then continue the curve but could not.can you help me.
sam here .
hold it down and it will start to curve
Nice👍
good
thnx
I have inventor professional 2013 at home and 2014 at school. If I model a part on the 2013 version will I be able to continue work on it on the newer version?
Hi CJ, you can, but keep in mind that once you have changed and saved it in 2014, you can't open it in 2013
ok thanks. That was the original problem but all I need to do is put parts from both editions into an assembly so I shouldn't have to work on it again on the 2013 edition.
the fillet dosent work in 8:26
joao guilherme 1st you stich the sweep part with other body then apply fillet command, it would then work
Can anyone help? Why I cant make the surface transform to solid.. the Thickness/Offset is showing error..
Did you end up solving this issue? I'm having the same problem. Thanks
@@guyeddington3469 I also have problem with that
Same problem here too contact me gunner1141781@gmail.com
@@techthatmatters141 Probably there is a problem with one narrow surface on the bottom of the kayak. Try to modify it.
I did it, found my solution.
So you don't go for 'quilt' and make whole structure solid at once, but go for 'face' and select individual surface and use 'join solid' command instead of 'new solid' and go on doing so for all surfaces. In case you didn't understand what I said you can contact me at gunner1141781@gmail.com
could you please send me the saved file so that i can do some upgrades please :D
can I request for a surfboard?
what comand do you use from 0:53 till 1:44?
Hi There, its actually just the line command, keep the left mousebutton pressed and you will get a tangent arc, great command.
thx
This looks really complicated. Probably not for starter...
This is yet another canoe modelling video which fails to produce a "good canoe shape".
It looks great and good enough for a rendering, but for a canoe enthusiast this is not even close. A canoe has a much more sophisticated shape than this. As of today there is to my knowledge no tutorial that goes through the steps to create a flawless shape. By "a flawless shape" we can consider the hallmark design and probably the most well known canoe of all times, the Prospector 16. Plan drawings of this is readily available. It's not an arbitrary lofted hull shape from a mid section to bow with two seats and a yoke... Cross sections at every 12" confirms the shape. If a fair lofted shape can be produced between these cross sections and connected to the bow and stern, then the model can be considered complete.
Shut up
@@zenixx Yeah, that means your canoe sucks..
no audio - useless for beginners. loss of time, pity. and advanced designers do not need this so much
good