I am 60 and diving into making my noises. Having so much fun but like most newbies I have workflow problems. I have to say you the Man. Your explanations, instructions and tone are the best I've come across. A thousand thanks from this Gen X old fool. B
I don’t think you understand how helpful this video actually is, THANKS MAN. Just sped up the workflow times 10 bro. I can spend 8+ hrs and doe just on searching for something tight. Point is everything is tight on my iPhone ✌🏻
You can also use 1/4 TRS cables going from the output of your Maschine into your Scarlett. That way you don’t have to switch back n forth and you can always hear what you are working on
if possible, please elaborate on this. I'm using the phones out on the MK3 with a 1/4 inch cable. Audio comes through Logic Pro, so the signal is coming in and the ports are definitely working. I just can't figure out how to get Maschine to recognize the output of my monitors, while also accepting the input of my phone through the sampler. Any help here would be appreciated...
If you cant hear audio through your headphones then you need to hit settings then go to the hardware page and switch mk3 outputs to +phones and turn head phone volume and mic gain up 👌🏼
Thanks for that info Bra!! was searching for almost a year, trying to find that out. You took me straight to it. I already have it set, I just needed the way to get the audio in. But Thanks for real. Worldwide Mafia Music.
Correct me if I'm wrong, but as an alternative, you could also connect the audio cable coming from the phone to the Mic In input instead, which would allow you to use a single stereo 1/4" jack.
Thank you! The *only* confusing part is that you did have a beat in the background that made me think that *maybe* that was the source . . . not the best idea on a "how to detect and source audio" lesson. But your path was the solution and I thank you!
Followed this video before in the past, recently just updated my firmware on the mk3 and all of a sudden there is no sound input coming in when on Detect. Followed steps accordingly, and had worked in the past but now it is not working, any one with same issue ?
Dope af man. I’ve been sampling off my phone like crazy and correct me if I’m wrong but sampling for the audio input and normalize make them samples sound dirty and not as digital
Hey man love your videos! One note - I was having issues as well, followed your video step by step.... the issue ended up being the Mic gain knob was all the way down. Once I cranked that up the levels came in. When you do this, is the mic gain knob all the way up? Just want to make sure this is right.
I notice you were using a Scarlett USB interface. Seeing as the Scarlett range are a pretty basic interface, is there any reason you'd use it over Maschine's own interface? Better Latency? Better preamps?
Hey first of all bruh thanks for everything you do...got a question I’m getting my Maschine on Monday I was wondering if you ever midi Maschine to to external gear for syncing with the sequencerof maschine and how?
I did exactly the same, but for one or another reason their is no signal coming through. Do you know why? Thanks in advance :) great videos by the way!
@@DDS825Yeah It is set right. I tried it via my phone and turntable and that worked just fine. Only when I try to sample through my mac, it doesn't work
To get sound to come out my headphone (using the mk3 as an audio interface) I have to change the sound input to In 1L+R on the pad I am sampling onto. I noticed I had to to this to every pad then create a template, since there isnt and master input options to change, then save it so every time I started a new track it saved. MY issue is I notice each pad is lit, even without anything recorded onto it. Does that sound normal? Thanks for any advice you could give.
I believe you would have to just change the output. Once you save it, it should stay. Your pads could be lit because you may be in keyboard mode. But I'm not 100% sure.
Hello! Can I ask you a question? I see General, Hardware in my mk3 setting, but Audio, Midi is not visible in setting. Is it because I don't connect to the audio interface or speaker? Does anyone know why I can't see it?
Hi great video thanks. Still, why my MK3 doesnt detect my iphone?, no signal appears on the screen of the MK3, I made all the setting you mentioned in the video but I can get signal to start sampling
Hey! So I was curious if you know if I would be able to sample another drum machines sounds straight into it or not. This is the closest video I have found that even is close to that & have been searching all over RUclips video’s & comments
Solution: Thank you for the video sir. (Turn your MIC UP) If you are looking at this video and you still have the issue, DDS stated to make sure the mic is turned all the way up on the MK3. I messed around for 3 hours and still didn’t get it till i saw that message way down in the thread comments. That was my issue. Mic turned down. Thank you. Let me save y’all some scrolling.
@@ozzelthecomposer5825 if you're opening in it up as a plug-in in logic its not gonna work you have to open it I stand alone mode for those options to work. I just spent the last hour trays figure it out lol
You can right-click on it and go to save as. Or you can click the wave icon on the right-hand side of the screen and drag it out to your desktop or something.
Is it normal that the input gain knob has to be all the way up to be able to hear it well? I’m not using an interface just the maschine plus and some headphones with monitoring. The headphone volume is half way and the line input is cranked all the way up to make the sound a normal volume .
if i were to use the same exact cables that you used in this vid. on my native instruments komplete audio 6 interface... would it be able to work with my maschine mk2? it doesn't come with the line in cable ports on the back :/ but i'm just trying to sample sounds and recordings from my desktop internally using the web browser.
Yo DDS! Why the hell is the gain so low when using the MK3's line inputs? I'm using a line-level turntable (plenty loud enough for my MPC One)... sampling into Maschine is like 35% of the gain it should be. Any way to increase this? I'm using the same exact cable you are (1/8" to dual 1/4" - an insert cable). From the phone, it's fine. Turntable... trash level. I can't believe there's so little info about this. Thanks man!
nice Vid! i've tried this, but it doesnt works, i dont know what's my mistake .... i'm using the same cable. i need help, maybe some settings are wrong i dont know
My question is: Is the Maschine software running in the background? When I switch my Maschine on it says start machine control editor or shift `+ channel for midi
@David Erlstoke I have Rme audio hardware and It is done with two clicks there, so I am guessing if you have just mk3, is it possible for you to catch and record system audio stream or mk3 master out.
Thanks so much for this video dude! I thought I was losing my mind haha! FINALLY managed to get audio coming into my MK3 and made my first sample. Thanks man!
I'm still having trouble with my mk3 line in on windows. Every connection works even the microphone but I still can't record samples through my line in.. I'm able to record through my microphone input but that's it.. wonder if it's my cable or if there is a problem with my mk3..😭 I will try to contact native instruments..
Mr. D I appreciate this video very much but one thing I need to know when you sample things such as instruments and you want to put the name of the instrument down instead of having the numbers how do you go by doing
Thanks for this video! I'm still not getting any signal from my turntable or iphone. can it be the input settings on the setting page p1 ? ie external stereo, ext mono, internal? My device is already "MK3" .. input routings 1: L 2 R.. not sure what else to do.. it seems like it would be simple .. HELP! UPDATE : My Daw Logic Pro X is reading the input on the mk3 which is the iphone. How can I sample directly into MK3?
Bro, Im going crazyyy.. was working perfectly off jump for me, over and over (appreciate that) suddenly all my recorded samples have ridiculous static noise.. know what this can be?
hoi have a komplete Audio 6 sound card ... can I record it to Maschine from that ?? e.g I am playing Spotify and want to record a track from there can i record direct to Maschine mk3 ... pretty similar to what you have done except used your phone a directly connected to Maschine
Ok so here’s what I don’t understand. After you sampled and switched the settings back to your audio interface how are you getting sound without the mk3 being connected to anything?
What up DDS... I'm about to venture into Native Instruments, I plan on getting your course, but wanted to know if your course would help with the Mikro before I purchase the MK3?
@@DDS825 i record my samples on -18 db and they output it something like -24/-28 .....i could record it louder but then i wil be twisting and turning knobs all the time. wel i wil find a solution somewhere and somehow thanx for youre time
Thanks for the tutorial. Have you ever heard of, or ran into the issue with the input coming in digitally disorted? Not like its peaking but more like the driver is screwed up or something? Everything coming in no matter the volume coming in is distorted. I have yet to successfully sample directly into the maschine without this issue. Been doing it since day one and i havent gotten past it..Any suggestion? Thanks man
yo thanks but im looking for a way to sample into the Mk3 whilst using a DAW. the only way i can record into the maschine is if i use the Maschine software standalone because whilst in a DAW the audio devices in maschine software cant be accessed. so frustrating
Hi DDS, I did everything as suggested by you. The input comes into MK3, I can see the bars moving when I play from my phone. But, the recording doesn't start. It says "waiting for next bar" when I click on "Start" button. I don't have a Mac. I'm a windows 10 PC user. I have selected ASIO driver and device is MK3. Input is "In 1 L+R". SOurce is External Stereo. Any ideas or suggestions will be great buddy! Thanks.
Turn up the knob that says “Mic In Gain”. I pass through some hours clicking here and there with no results. Don’t know how but it just happened. I felt disappointed that NI didn’t adviced it or labeled too as “IN/MIC gain”. But that’s it.
Hit "Sampling" - use the arrows to go to the LAST page - at 1:19 you can see it says "Detect" and "Threshold" - its the page AFTER this - It should say "16 bars" or something - change this to FREE
Thanks, other than Audio being rec a lil to low it’s great. Also I sampled from RUclips, where do you think is the best place to sample from on the iphone
I have one of these for about a few months. This really helps understand how to use it. Now that I subscribed let me check out your other videos for more instructions.
Yo man when I click on settings on my mk3 it only comes up with General and hardware and no option to choose audio or MIDI. Do you have any idea on how to solve that? would be much appreaciated!
I’ve tried so many time over three days to get input to go to Maschine and frustrated, still no joy, linked to Mac and standalone Maschine software ( not daw)....head banging...also tried direct from helix, and other devices , still won’t show any input. Maybe it’s broken...only had this 1 week.
I am 60 and diving into making my noises. Having so much fun but like most newbies I have workflow problems. I have to say you the Man. Your explanations, instructions and tone are the best I've come across. A thousand thanks from this Gen X old fool. B
That’s great to hear! I’m glad I could help you on your journey! 🙌🏽
bro, every time I search MK3 tutorials youre first to pop up.. thx again..
That’s a good thing 🤣! Thanks for watching!
Been trying to figure this out for the longest, watched other videos but they didn't explain it the best . You made it easy and I appreciate
Glad it helped!
I don’t think you understand how helpful this video actually is, THANKS MAN. Just sped up the workflow times 10 bro. I can spend 8+ hrs and doe just on searching for something tight. Point is everything is tight on my iPhone ✌🏻
Glad I could help!
homie I've been watching YT videos for a week trying to figure this out thank you so much. i'm sampling from vinyl but this still worked perfectly.
Glad I could help!
Thanks Buddy... 2 in the morning and your video saved me
You can also use 1/4 TRS cables going from the output of your Maschine into your Scarlett. That way you don’t have to switch back n forth and you can always hear what you are working on
Thanks for the info!
if possible, please elaborate on this. I'm using the phones out on the MK3 with a 1/4 inch cable. Audio comes through Logic Pro, so the signal is coming in and the ports are definitely working. I just can't figure out how to get Maschine to recognize the output of my monitors, while also accepting the input of my phone through the sampler. Any help here would be appreciated...
If you cant hear audio through your headphones then you need to hit settings then go to the hardware page and switch mk3 outputs to +phones and turn head phone volume and mic gain up 👌🏼
Thanks for that info Bra!! was searching for almost a year, trying to find that out. You took me straight to it. I already have it set, I just needed the way to get the audio in. But Thanks for real. Worldwide Mafia Music.
many thanks; clear, thorough and brief. Really helps to see all the pieces.
Glad I could help!
Correct me if I'm wrong, but as an alternative, you could also connect the audio cable coming from the phone to the Mic In input instead, which would allow you to use a single stereo 1/4" jack.
You may be correct, I’m not sure.
Thank you, this worked for me. You are the 🐐
Thank you! The *only* confusing part is that you did have a beat in the background that made me think that *maybe* that was the source . . . not the best idea on a "how to detect and source audio" lesson. But your path was the solution and I thank you!
Followed this video before in the past, recently just updated my firmware on the mk3 and all of a sudden there is no sound input coming in when on Detect. Followed steps accordingly, and had worked in the past but now it is not working, any one with same issue ?
I have an updated video in the description of this video
same problem here, im not sure if it is related to a malware mk3
@@julioalejandromunoz2680 turn your mic up on MK3
Dope af man. I’ve been sampling off my phone like crazy and correct me if I’m wrong but sampling for the audio input and normalize make them samples sound dirty and not as digital
Appreciate it man and In my experience, normalizing the audio just makes it louder and does give it a dirty sound.
just wanted to say thank u. your videos have helped me so much w my mk3
No problem! I’m glad I can help!
Thanks. This took me forever to do. I had to switch my settings in the audio portion
Absolute gem of a video. Thank you, kind Sir!
Thank you for watching!
Hey man love your videos! One note - I was having issues as well, followed your video step by step.... the issue ended up being the Mic gain knob was all the way down. Once I cranked that up the levels came in. When you do this, is the mic gain knob all the way up? Just want to make sure this is right.
I appreciate the feedback. I believe the mic gain was up when I did this.
This! Thank you for this comment! I thought that I was going crazy as I could not get sound. This helped me a ton.
I was one of the confused people from your last video...... appreciate the update
Glad you watched it!
EXACTLY what I needed!!!!!! Thank you sir!!!!!
No problem. I’m glad it helped!
Tried this with my iPhone and iPad works a treat, still learning Maschine but these vids are really helpful Thanks D appreciate the help :)
I’m glad they are helpful!
Have you done any vids regarding using Maschine (building a track from scratch using patterns?) thanks D.
@@DDS825 Can I sample using an android phone?
I notice you were using a Scarlett USB interface. Seeing as the Scarlett range are a pretty basic interface, is there any reason you'd use it over Maschine's own interface? Better Latency? Better preamps?
Hey first of all bruh thanks for everything you do...got a question I’m getting my Maschine on Monday I was wondering if you ever midi Maschine to to external gear for syncing with the sequencerof maschine and how?
No I haven't. I just use Maschine.
Thank you Family… hope all is well with you and your family… I’m back in it trying to work with it again
Likewise! Welcome back!
I did exactly the same, but for one or another reason their is no signal coming through. Do you know why? Thanks in advance :) great videos by the way!
I've had a few people say they had issues with it. Is your audio device set to your mk3 in the preferences?
@@DDS825Yeah It is set right. I tried it via my phone and turntable and that worked just fine. Only when I try to sample through my mac, it doesn't work
To get sound to come out my headphone (using the mk3 as an audio interface) I have to change the sound input to In 1L+R on the pad I am sampling onto. I noticed I had to to this to every pad then create a template, since there isnt and master input options to change, then save it so every time I started a new track it saved. MY issue is I notice each pad is lit, even without anything recorded onto it. Does that sound normal? Thanks for any advice you could give.
I believe you would have to just change the output. Once you save it, it should stay. Your pads could be lit because you may be in keyboard mode. But I'm not 100% sure.
My maschine is saying not connected I switched it to mk3 and everything any advice would be appreciated.
The actual display on the Maschine says not connected?
Hello! Can I ask you a question? I see General, Hardware in my mk3 setting, but Audio, Midi is not visible in setting. Is it because I don't connect to the audio interface or speaker? Does anyone know why I can't see it?
Thank you, DDS.
No problem! Thank you for watching!
Hi great video thanks. Still, why my MK3 doesnt detect my iphone?, no signal appears on the screen of the MK3, I made all the setting you mentioned in the video but I can get signal to start sampling
hey, excellent video. im having an issue with the volume tho, its coming out very low. if you could help me out with that id appreciate it.
same, someone have an issue ?
What sampling app are you using on your phone ? Splice ? Or can I use anything , like iTunes ?
I wasn’t using a sample app. I was using Apple Music
Bro thank you for your time I appreciate you
so clutch. saved me so much time. good looks!
Glad it could help!
Thanks for the update!! Highly appreciate it!
Thanks for watching
Can you use this function to sample from a streaming service like Apple Music?
You can sample anything lol
DDS825 I should be getting mine tomorrow, and was wondering if I could use a ion conversion turntable with the maschine mk3???
I believe you can.
Appreciate that bro
Hey! So I was curious if you know if I would be able to sample another drum machines sounds straight into it or not. This is the closest video I have found that even is close to that & have been searching all over RUclips video’s & comments
I’m not 100% sure. But I don’t see why you wouldn’t be if you can route the output of the drum Machine to the Maschine Mk3
Hey D what type of adapter is that you're connecting to your phone
It’s the headphone adapter for iPhone 7 & up.
Thanks for this video just got my Mashine MK3 I’m Learning
DDS, can you please link the cable that goes from the phone, to the chord you have linked to the mk3
I wanna try this asap, please!
The link is in the description.
@@DDS825 it's two seperate chords ain't it?
Oooo it’s just the iPhone adapter for the headphone jack
Solution: Thank you for the video sir. (Turn your MIC UP) If you are looking at this video and you still have the issue, DDS stated to make sure the mic is turned all the way up on the MK3. I messed around for 3 hours and still didn’t get it till i saw that message way down in the thread comments. That was my issue. Mic turned down. Thank you. Let me save y’all some scrolling.
Bro if i had a million dollars i would send you half. Thank you
How do you get the audio selection after hitting settings mo only choice our general hardware and metronome
What do you mean by audio selection?
@@DDS825 Same issue. Once I hit settings, my only options are General and Hardware. No option to select Audio like when you hit Settings
@@ozzelthecomposer5825 if you're opening in it up as a plug-in in logic its not gonna work you have to open it I stand alone mode for those options to work. I just spent the last hour trays figure it out lol
@@onebluntman10 ahhh geez. I don't really run it in stand alone. Lame.
@@onebluntman10 Thanks though! Guess I might be selling it then! :-D Maybe.
Thank you for the tutorial 🙏🏽 have you ever used the numark pt01 to sample vinyl into the mk3?
this just saved my life
Question.. I took a sample off Portrait You Know and I tried but have not succeeded. canyon use Note Repeat in a sample?
Once I sample from the turntable into the maschine, is there a way I can turn the sample file into a wav file? it saves as a mxsnd file.
You can right-click on it and go to save as. Or you can click the wave icon on the right-hand side of the screen and drag it out to your desktop or something.
@@DDS825 Thanks!
Is it normal that the input gain knob has to be all the way up to be able to hear it well? I’m not using an interface just the maschine plus and some headphones with monitoring. The headphone volume is half way and the line input is cranked all the way up to make the sound a normal volume .
Your video helped a lot man, but the volume of the sample imported from my phone is really low, why is this happening?
DDS! My man 50 Grand! EXACTLY what I needed Bruh! Thanks!!! 🙏🙏😎😎😎😎
Lol I'm glad I could help!
Do it matter if you use mono or stereo cables
I would use stereo.
if i were to use the same exact cables that you used in this vid. on my native instruments komplete audio 6 interface... would it be able to work with my maschine mk2? it doesn't come with the line in cable ports on the back :/ but i'm just trying to sample sounds and recordings from my desktop internally using the web browser.
Yea that would work.
The Sample extension for Chrome should work
Yo DDS! Why the hell is the gain so low when using the MK3's line inputs? I'm using a line-level turntable (plenty loud enough for my MPC One)... sampling into Maschine is like 35% of the gain it should be. Any way to increase this? I'm using the same exact cable you are (1/8" to dual 1/4" - an insert cable). From the phone, it's fine. Turntable... trash level. I can't believe there's so little info about this. Thanks man!
Thanks for this info, helped me a lot (me = new mk3 owner)
Glad I could help man!
nice Vid! i've tried this, but it doesnt works, i dont know what's my mistake .... i'm using the same cable. i need help, maybe some settings are wrong i dont know
I’m going to try it again
DDS825 thank you so much!
My question is: Is the Maschine software running in the background? When I switch my Maschine on it says start machine control editor or shift `+ channel for midi
Yes the Maschine software is running.
Hello. How do you sample from You tube with no cables? Any ideas?
You’d have to download the audio or use an app to record the computer’s audio and then drop it into maschine
@@DDS825 ок, thanks!
No problem!
@David Erlstoke I have Rme audio hardware and It is done with two clicks there, so I am guessing if you have just mk3, is it possible for you to catch and record system audio stream or mk3 master out.
How do you go about clearing samples ? Thanks
Record labels handle that when they decide to put it out.
Dude you are the man thank you so much !! I was stuck with it not detecting the sound thank you
Thanks so much for this video dude! I thought I was losing my mind haha! FINALLY managed to get audio coming into my MK3 and made my first sample. Thanks man!
Lol I’m glad I could help!
Big help man haha! First Maschine video will be uploaded soon 👊🏻
@@JonMurray still waitin!
I'm still having trouble with my mk3 line in on windows. Every connection works even the microphone but I still can't record samples through my line in.. I'm able to record through my microphone input but that's it.. wonder if it's my cable or if there is a problem with my mk3..😭
I will try to contact native instruments..
Mr. D I appreciate this video very much but one thing I need to know when you sample things such as instruments and you want to put the name of the instrument down instead of having the numbers how do you go by doing
is your mk3 running to your scarlett (as an input) before computer? and if so , why not just usb? thnx
I just didn't my maschine as my audio interface.
@@DDS825 I just got a Scarlett 8i6, do you see any purpose for me running my MK3 through it (as a channel input) instead of the iMac USB?
Hey bro, do you know if it’s possible to hear what you are sampling through the headphone jack on the Maschine Plus?
Do you have the monitor option on?
@@DDS825 Nope that was it lol. Thanks bro!
No problem!
Thanks for this video! I'm still not getting any signal from my turntable or iphone. can it be the input settings on the setting page p1 ? ie external stereo, ext mono, internal? My device is already "MK3" .. input routings 1: L 2 R.. not sure what else to do.. it seems like it would be simple .. HELP!
UPDATE : My Daw Logic Pro X is reading the input on the mk3 which is the iphone. How can I sample directly into MK3?
Bro, Im going crazyyy.. was working perfectly off jump for me, over and over (appreciate that) suddenly all my recorded samples have ridiculous static noise.. know what this can be?
I’m not really sure, I’m going to have to look into it.
Did the recent update 2.8.5 fuck something up or is it just me cus i cant sample anything anymore using this method.
I will check it out.
@@DDS825 update: i checked it out and my phone works to sample but i connect the plug to my laptop and it doesnt work.
If u use the inbuilt audio is internal sampling possible? Meaning u play some youtube tunes through the mk3 and capture that sound?
I don’t believe that feature is available yet
DDS825 Ok, but thanks for the answer
Hello. I did everything you said in the video, but I'm getting an error message saying , Output file cannot be written
hoi have a komplete Audio 6 sound card ... can I record it to Maschine from that ?? e.g I am playing Spotify and want to record a track from there can i record direct to Maschine mk3 ... pretty similar to what you have done except used your phone a directly connected to Maschine
The only options im getting in audio are input routings internalL and internalR, im using a maschine plus, but that shouldnt matter right?
I'm not seeing MK3 under my device settings? Do you know whats up with that?
Also does your MK3 ever freeze on you? Seems to be happening often for me, and I've switched USB ports and cables a couple times already
Ok so here’s what I don’t understand. After you sampled and switched the settings back to your audio interface how are you getting sound without the mk3 being connected to anything?
When I connect, my maschine mk3 doesn't pick up any sound. I changed the interface and it doesn't work. Please help!
Did you change your inputs in the Audio settings?
DDS825 yes, I did. I can do now, is a problem with iOs and maschine versions
What up DDS... I'm about to venture into Native Instruments, I plan on getting your course, but wanted to know if your course would help with the Mikro before I purchase the MK3?
hello, do you have that recorded audio sounds less loud when recorded and when played back...if i look at my mixer the volume is droped maybe 10 db.
I don't think so. You might have to turn the gain up on the MK3.
@@DDS825 i record my samples on -18 db and they output it something like -24/-28 .....i could record it louder but then i wil be twisting and turning knobs all the time.
wel i wil find a solution somewhere and somehow thanx for youre time
Thanks for the tutorial. Have you ever heard of, or ran into the issue with the input coming in digitally disorted? Not like its peaking but more like the driver is screwed up or something? Everything coming in no matter the volume coming in is distorted. I have yet to successfully sample directly into the maschine without this issue. Been doing it since day one and i havent gotten past it..Any suggestion? Thanks man
Usually that’s a problem with the interface, or cpu. Try a higher buffer size. I’ve had it happened before in the past with an older interface.
Thank u so much 🙏🏽 this is
Dope .. we can use a phone to sample wow lol amazing 🙏🏽
Thank you for watching!
Hej mate sorry my english is not the best.... What app did you use for this?
What app did I uses for what?
@@DDS825 My fault... Everything works perfect now... thx for your video
Yo… I followed every step precisely and still not audio coming thru to my hardware? I’d appreciate some feedback… thanks bro..
yo thanks but im looking for a way to sample into the Mk3 whilst using a DAW.
the only way i can record into the maschine is if i use the Maschine software standalone because whilst in a DAW the audio devices in maschine software cant be accessed. so frustrating
:( was wonder why i couldnt find the audio section :(((((((( so frustrating
Why is the sample volume lowered after it is generated?
Hi DDS, I did everything as suggested by you. The input comes into MK3, I can see the bars moving when I play from my phone. But, the recording doesn't start. It says "waiting for next bar" when I click on "Start" button. I don't have a Mac. I'm a windows 10 PC user. I have selected ASIO driver and device is MK3. Input is "In 1 L+R". SOurce is External Stereo. Any ideas or suggestions will be great buddy! Thanks.
Turn up the knob that says “Mic In Gain”. I pass through some hours clicking here and there with no results.
Don’t know how but it just happened.
I felt disappointed that NI didn’t adviced it or labeled too as “IN/MIC gain”.
But that’s it.
My Setting are the same as yours, BUT my bars dont move... and it generally doesn't work.. neeed some help please, thanks!
when Im recording my sample is only records for about 2.5 seconds then stops how do I change that bro??
Hmm I’ll have to look into it
Hit "Sampling" - use the arrows to go to the LAST page - at 1:19 you can see it says "Detect" and "Threshold" - its the page AFTER this - It should say "16 bars" or something - change this to FREE
Actually it will say "1 Bar" which is why its cutting you off quickly
Gona buy this piece
im about to give up this isnt working i follwed it step by step & im teach savy
I’ve done another update to this but it’s the same process. Check and make sure your mic input is turned up.
How do I make the audio sound louder? It worked but audio is a lil too low..
I’ll have to look into this today.
Thanks, other than Audio being rec a lil to low it’s great. Also I sampled from RUclips, where do you think is the best place to sample from on the iphone
I can see the output signal on the mk3, and the sound are coming threw the monitor. but when i hit record it just says - waiting for next bar.
It’s counting in. I’d switch it to detect mode, it works better in my opinion
just start Play button
just start Play button
@@kubiakdissou4083 Thanks bro, that did the job :)
Great videos for the MK3. Thank you for all the vids!
Thanks allot for this great help to setup the Mic input!
Glad I could help!
I have one of these for about a few months. This really helps understand how to use it. Now that I subscribed let me check out your other videos for more instructions.
Glad this video helped! Thanks for subscribing!
Yo man when I click on settings on my mk3 it only comes up with General and hardware and no option to choose audio or MIDI. Do you have any idea on how to solve that? would be much appreaciated!
Is your Maschine Software up to date. If it is, I'm not sure what the problem is.
Hey, just got my MK3 a couple days ago, updated it and now the sampling via iPhone function isn’t working :(
I’m going to look into this
DDS825 great! Thankyou 🙏🏾
@@DDS825 Hey, just to let you know it works now!
Seyi what was the issue?
What if you have android telephone and want to sample from Spotify? Can you use the same techinque?
Yes
Cheers Mate, from Australia.
Appreciate you watching!
Really helpful. Thanks brother~
No problem!
Good looking out bro... Nice video
Yo so I just got the G S20 ultra which does not have the 3mm jack HELP!!
There may be some type of adapter for you to get.
Can someone help me with my MK3 can't sample internal sounds... I'm trying to sample my video from RUclips couldn't figure out how to do it
Do I still need my PC for this to work? Can this be a standalone option?
Yes you do, it’s not standalone
I’ve tried so many time over three days to get input to go to Maschine and frustrated, still no joy, linked to Mac and standalone Maschine software ( not daw)....head banging...also tried direct from helix, and other devices , still won’t show any input. Maybe it’s broken...only had this 1 week.