Its simple way to reactived your sealed batteries, mostly after 1 or 2 years the liquid inside the cell will gone. We can put additives and distilled water mix 70:30. 70% of additives liquid (battery acid) and 30% of distilled water. Simple use the hygrometer to keep good mixed liquid to put inside the cells. Filled until the fiber become wet. Charge it and diacharge about 50% and again charging it until full charge.
Thanks for the video. The steps are quite simple and easy too. But before I try fixing my battery. Mine is a sealed solar battery. 12V, 165Ah. I've never fixed any before. What additives should I get. At what ratio should I mix with distilled water. Thanks
7 year ago you posted this video - are you doing any more videos under a different name? Would be great to follow you. I have a 48 volt AbsolyteGX battery bank that I was able to acquire and I would like to use it for off grid power system. Great video.
though you havd not responded any commemt but still asking "by each cell you mean we should have to divide the solution in halves for positive and negative terminals ? or just pour full amount of made solution.
As I can assume, add 10 ml (of printer head cleaner solution from any computer parts shop) to 40 ml of de-ionized water, and mix thoroughly. If the battery is 100 Amp h, then add 10 ml to each of the 6 cells. Do not overfill and do not use any acid.
I have a seal battery rated 6v and it's reading 6.3v after charging but it can not Cary any load, that is it drop down to 0v or 0.5v. Please what should I do repair it back, please I need your support?
Additive is battery acid, specifically sulfuric acid (H2SO4). In the US it is available in auto parts stores, and some hardware stores. Pure sulfuric acid is way too strong for a battery, and will destroy it. It needs to be diluted INTO distilled water. ALWAYS “add acid to water (“watah”) just as you oughta (ought to). This is a mnemonic from my chemistry class to remember to add concentrated acids to water, instead of adding water to the acid. The acid can heat up, boil over, or worse if you add water to acid. The water MUST be distilled, because the minerals in tap water, bottled water, spring water, boiled water, and everything else will ruin your battery permanently.
I have two of the NorthStar 100ah batteries and both were dead when I got them and when i tried charging them, they don't keep the charge and one was running really hot. Can I use this same method and repair them both? And why only one was running hot?
@@jumsatheone I dumped them both. The one that was running hot didn't work at all but the other one gave me a small run then was useless again so they both went in the trash.
As I am watching I tot this was the right video for fixing sealed batteries, but without you answering addictive this become less important
Its simple way to reactived your sealed batteries, mostly after 1 or 2 years the liquid inside the cell will gone. We can put additives and distilled water mix 70:30. 70% of additives liquid (battery acid) and 30% of distilled water. Simple use the hygrometer to keep good mixed liquid to put inside the cells. Filled until the fiber become wet. Charge it and diacharge about 50% and again charging it until full charge.
Thank you so much for your reply and sharing knowledge.
Hi
What is the chemical name of additive
The addivite is Epsom salt available in pharmacies or lemon juice.
Noooo! It is sulfuric acid, those other chemicals aren’t going to permanently fix it. Epsom salt is at most a temporary fix.
What type of fluid do you put in the Northstar battery and where do you get it? Thanks keep up the good work even though it hasn’t been a while.
What type of addictive did you add to the DC water? I have 2v 754ah and 1.5v 100ah, is it advisable to use 2, 10, and 20 amp battery charger?
Wow good information thanks
Thanks for the video.
The steps are quite simple and easy too.
But before I try fixing my battery.
Mine is a sealed solar battery.
12V, 165Ah.
I've never fixed any before.
What additives should I get.
At what ratio should I mix with distilled water.
Thanks
Nice presentation and video clip.
Thanks.
What is the additive pls?
What type of additives to add to the sealed battery
Thank you for the information. Pls what is the name of the elements of the addictive?
Additive is most probably diluted sulfuric acid (sold as battery acid)
Battery acid even in the cell cite deep cycle battery??
7 year ago you posted this video - are you doing any more videos under a different name? Would be great to follow you. I have a 48 volt AbsolyteGX battery bank that I was able to acquire and I would like to use it for off grid power system. Great video.
You provide good information, why didn't you continue with this?
What is the additive you mentioned I thought it’s just distilled water that is needed
what kind of additive solution can i put to my gel type battery
What additive do I add to the cell site batteries ?
شكرا علي هاذا لفديو وماهي المادة لإحياء البطاريات الجل وجزاك الله خير
Luke 21,36 KJV
It’s head cleaner you will find from Office Depot it’s a printer head cleaner mix it with distilled water
What?? Sulfuric acid, not head cleaner.
What?! Are you guys on acid???? At this rate you will be advising people to use piss as 'additive' 😡
Someone sai the additive was Isopropyl Alcohol which is used to clean printer heads .
Which additives do u use
What is the additive used distilled water in sealed batey .is it available in India ,which manufacture it?
Hi can please help me where can I buy the additive? Thanks Simon
though you havd not responded any commemt but still asking "by each cell you mean we should have to divide the solution in halves for positive and negative terminals ?
or just pour full amount of made solution.
As I can assume, add 10 ml (of printer head cleaner solution from any computer parts shop) to 40 ml of de-ionized water, and mix thoroughly. If the battery is 100 Amp h, then add 10 ml to each of the 6 cells. Do not overfill and do not use any acid.
What is the additive meaning.
Additive! What is that ?
What is the component of the additives
can i add solution to my gel battery
Hi what is the two liquid to mix dont know much about it
Hi. what additive do i use with the distilled water?
additives liquid (battery acid)
Pls I have (2)200ah Gel battery using it for solar system but it quickly get to full and also run down quickly too what can I do ?
I have a seal battery rated 6v and it's reading 6.3v after charging but it can not Cary any load, that is it drop down to 0v or 0.5v. Please what should I do repair it back, please I need your support?
Additive?
Bro , be honest and tell us the secret of additive.
what u mean by Additive?
Additive is battery acid, specifically sulfuric acid (H2SO4). In the US it is available in auto parts stores, and some hardware stores.
Pure sulfuric acid is way too strong for a battery, and will destroy it.
It needs to be diluted INTO distilled water. ALWAYS “add acid to water (“watah”) just as you oughta (ought to). This is a mnemonic from my chemistry class to remember to add concentrated acids to water, instead of adding water to the acid. The acid can heat up, boil over, or worse if you add water to acid.
The water MUST be distilled, because the minerals in tap water, bottled water, spring water, boiled water, and everything else will ruin your battery permanently.
مترجم عربي وماهي المادة لتشغيلها
Enersys powersafe 12volt 170fs flat. Only 2 year old and flat. Ehat can I doo ??
Good morning sir
Apa dia maksudkan aditif? itu adalah asid Aki yang digunakan untuk Aki basah dan itu di campur dengan air Aki
my nsb battery just started swelling and breaking the shell, can it be repaired?
No. Too dangerous
I have two of the NorthStar 100ah batteries and both were dead when I got them and when i tried charging them, they don't keep the charge and one was running really hot. Can I use this same method and repair them both? And why only one was running hot?
did you fix it? if yes how? much appreciate
@@jumsatheone I dumped them both. The one that was running hot didn't work at all but the other one gave me a small run then was useless again so they both went in the trash.
@@UNLOCKCONNECTIONS good to know, and thanks for the reply
Epbson salt?.
What is the additive ??? It is never mentioned
You have never responded to any comments below
What do you mean addictive?
addictive 10ml acid 1150 plus water
Hello saya ingin berbagi ilmu.
Aditifnya adalah h2so4 atau asam sulfate .kemudian di charger.dengan arus maximal 10 ampere.untuk.bateray vrla 100ah
Thank you for the brief, but I dont know what you mean by additive? Pls help thanks
Dear,
100Ah battery =10ml Additivet
what means Additivet Please. All no this means........
لم يتبين لنا انك اصلحت بطاريه
E-mail para contato?
May i know what is that chemical you mean
can i put battery solution on gel type battery
what kind of additive solution can i put to my gel type battery