Dear PJ, thank you so much for your tutorials.At around 8.20 min in the film I encounter a problem. The 6 elements have been snapped to the ring circle, quadrant to quadrant. But then when I rotate them (Front view) one by one they don't stay anchored on the ring circle... I have tried again and again and can't find why they are off the curve. Kind regards, Wendy
hello, i am manish soni from india . i am professional cad designer we work at reasonable prices , if you need in the future pls cont. me on my whatsapp no. +91-84410-19176 thanks. for shyam sarkar cad cam manish soni
claudio gruhn Luz the resolution on this video is 1920x1080. It should be clear for most of screen. Sometimes internet speed does affect the resolution tho.
Great tutorial! I am a little stumped on how you came up with the 40 degree rotation. Would be nice to know how you came to that number so that I can apply this technique when more twists are needed. Thank you so much for all your hard work!
because there are 6 point on the circle. so there are 60 degree between each point. 60/3=20. so 20 degree each side of the point turn into 40 degree total
Thank you, i am watching each of your videos. There are amazing but in this one its hard to place the thorns on the ring. Is there a better way to navigate?
Love this PJ Chen. I'm considering strongly to sign up for your courses, especially DubD. May I ask if this particular design can accomodate a boolean!? Like for example, if you want to break up the top and add a collet?
Hello Thank you for this course ,very useful. I have a question: When I want to use" sweep 1 Rail" ,it doesn't work? I mean it can't hide the object. what is the problem?
Hi PJ. I tried to draw the vine-like ring shank by using the sweep 1 rail command, but then i noticed that the object was an open polysurface (i also notice that yours is also an open one too). Will it cause any problems during the printing process and are there any ways to fix it? Thank you.
Hi, If the cross session for the sweep 1 is a close curve. You should have a close polysurface after you cap it. Sometime, it appears naked edges on where there join edges, that may caused by the alignment. If it still cause the model problem, you can send the model to my email at pj@pjchendesign.com I can take a look for you.
Hi Julien, what type of 3D printer do you use? Each printer has different shinkage on resin or wax. You need to do some test first. You can measure your model and resin to compare the difference.
Hola. Luego de utilizar el sweep 1 y generar el anillo, al intentar agrandar o mover los circulos que dan forma al anillo, estos se mueven independiente a la forma creada :c
The rotation of the sweep edges is a very useful technique
No.1 CAD Chennal On RUclips 🙏🏼 Thanks PJ
If you mean membership. It is USD $4.99 a month. Here is the link ruclips.net/channel/UCR3Dddx8nw4CYSkKmlvzXiAjoin
Thank you so much for this tutorial PJ. You explained it very well. Thank you.
thank you for liking my video.
Dear PJ, thank you so much for your tutorials.At around 8.20 min in the film I encounter a problem. The 6 elements have been snapped to the ring circle, quadrant to quadrant. But then when I rotate them (Front view) one by one they don't stay anchored on the ring circle... I have tried again and again and can't find why they are off the curve. Kind regards, Wendy
You really opened my eyes... PJ.. Good share !
Super!!
Very nice PJ !! You are awesome. I love all your videos!!!!
Ling Ng thank you !
Found your channel today and it's so full of content that I can't stop watching it! Incredible classes, thanks for sharing with us!
Welcome aboard!
Another wonderful video PJ! You are an amazing teacher and I always learn something new.
Thank you Karen!
Love all your videos !!!
Thanks for a great lesson!
You are welcome.
Hi PJ , thank you for your helpful video 😊🌷
forough sayadi you are very welcome
Excellent video
Glad you liked it
Good video thanks PJ
you are welcome
great video and was really easy to understand thank you
jay soni You are welcome, Jay!
Thank you, thank you, THANK YOU! You're amazing!
You're so welcome!
Thank you again for a wonderful lesson.
You are very welcome Poya. Let me know if you have a specific model you like to learn!
great. nice lesson.
Thank you
You´re the best, just it! Thanks for all
thank you!
hello, i am manish soni from india . i am professional cad designer we work at reasonable prices , if you need in the future pls cont. me on my whatsapp no. +91-84410-19176
thanks.
for shyam sarkar cad cam
manish soni
Very nice..
Liked it already!!
Awesome Video ! Learn a lot from this one . Thank you very much !
Glad to hear that!
شكرا لك
you are welcome!
ok, when you have text recording the resolution is not so good. Your tutorial are great!!
claudio gruhn Luz the resolution on this video is 1920x1080. It should be clear for most of screen. Sometimes internet speed does affect the resolution tho.
@@PJChenJewelryDesign Hello
sorry, I expressed myself badly. Your tutorials are in great resolution!
Thank you!
@@claudiogruhnLuz No problem. Thank you!
Always excellent your work.
Really I enjoying every time watching your video💕💞💕💞
Thank you!
hi lovely teacher . i have question. How was the number 40 obtained?
Which part?
@@PJChenJewelryDesign at the begining . I think about it and finally understand . Thank you🥰
Great tutorial! I am a little stumped on how you came up with the 40 degree rotation. Would be nice to know how you came to that number so that I can apply this technique when more twists are needed. Thank you so much for all your hard work!
because there are 6 point on the circle. so there are 60 degree between each point. 60/3=20. so 20 degree each side of the point turn into 40 degree total
@@PJChenJewelryDesign you sir, are a genius. Thank you.
Nice one
Thank you,
i am watching each of your videos.
There are amazing but in this one its hard to place the thorns on the ring.
Is there a better way to navigate?
Try to use Gumball. It may helps!
Thank you very much
You are welcome
Love this PJ Chen. I'm considering strongly to sign up for your courses, especially DubD. May I ask if this particular design can accomodate a boolean!? Like for example, if you want to break up the top and add a collet?
any SubD object can convert to regular Rhinio Nurbs surfaces, and you can use boolean commands on them
@@PJChenJewelryDesign great, and what about the design in this video? I've created this ring as per your instructions but found out it won't boolean?
Thanks a lot.
Gracias por compartir tus conocimientos
You are very welcome!
THANK YOU FOR THIS TUTORIAL
PLEASE MORE TUTORIAL ABOUT 3D LEAF IN RHINO FOR WOOD
for wood? do you mean rendering texture?
This video just saved me today! Thank you so much, PJ! You're wonderful! =)))
You are very welcome, Bruna!
Pj how did you install rhino gold and that rendering options at bottom right...I want to know about various tools
Hi Rajath. not so sure I got the questions right. Could you screenshot and email me to pj@pjchendesign.com?
非常感谢您的课程
很開心你喜歡我的videos,記得觀看每個星期一的新片呦！
Hello
Thank you for this course ,very useful.
I have a question:
When I want to use" sweep 1 Rail" ,it doesn't work? I mean it can't hide the object.
what is the problem?
I won't know till see the model. You can send the model to pj@pjchendesign.com and write me a short description. I can take a look for you.
thank you!
You're welcome!
Hi PJ. I tried to draw the vine-like ring shank by using the sweep 1 rail command, but then i noticed that the object was an open polysurface (i also notice that yours is also an open one too). Will it cause any problems during the printing process and are there any ways to fix it? Thank you.
Hi, If the cross session for the sweep 1 is a close curve. You should have a close polysurface after you cap it. Sometime, it appears naked edges on where there join edges, that may caused by the alignment. If it still cause the model problem, you can send the model to my email at pj@pjchendesign.com I can take a look for you.
Hi PJ! Great video! Thanks for sharing it. Is there a way to add wood grain to this technique in place of the vine texture?
yes, you may need to spend some time to find a woodgrain image. black and white usually work better. make sure the texture depth is subtle.
i would love to see a tsplines Tutorial From you !!!
gnaaa14 thank you. I will put that in my tutorial creating list.
by the way, Just want to let you know. Starting from Rhino 6. T-spline is no longer a plug- in for Rhino.
Hi PJ ! Thanks for the video. Question, how do you know its accurate for 3d printing?
Hi Julien, what type of 3D printer do you use? Each printer has different shinkage on resin or wax. You need to do some test first.
You can measure your model and resin to compare the difference.
Nice video pj ... I need your help for something .. can you do?
You can email me at pj@pjchendesign.com
thank u so much i learn a lot from this tutorial u r great bro.
You are welcome. Don't forget to check out my other Rhino 3D tutorials. You will find a lot of useful tips on them!!
hey PJ,my ring is not puffy! what am i doing wrong? ;(
not sure without seeing the model. I am guess when you sweep, your cross section is not 90 degree toward to the rail direction?
@@PJChenJewelryDesign thanks PJ!
Hola. Luego de utilizar el sweep 1 y generar el anillo, al intentar agrandar o mover los circulos que dan forma al anillo, estos se mueven independiente a la forma creada :c
not sure I undersand it right. but you can try to record history so when you move any curve. the shape will follow as well.
how do you rotate it and it still stays on the curvy edge?
what min:second on video are you referring to?
obrigado pj tava com dificuldade pra fazer !
que tipo de troble você teve neste tutorial?
was using another method
yours worked!
can you explain how to create gumball tools
Hi! how you rendering real time diferent materials gold and metal?
I was in Rhino 6 and in render mode. You can assign different materials first.
what finger size?
You can build on any ring sizes.
How to use record history...
Before you click on any commend, click "record history" button first. It is located at the bottom, next to gumball button.
Hello! I always have a problem with the boolean operations. Even now. all the polysurfaces are closed, but still boolean isn't working... why is so?
Make sure the seams are not perfectly aligned.
Snowgrave
Thank you♥️♥️♥️👍👍👍👍
You are so welcome!
Plzzz Sir member ship program link send mee I need it
ruclips.net/channel/UCR3Dddx8nw4CYSkKmlvzXiAjoin
@@PJChenJewelryDesign yes sir
Plzz
💝🙏💕
thank you!
izzaidy jamal you are welcome !