💬 How Base Maps Work and where to get yours FREE | TECHNICALLY SPEAKING
HTML-код
- Опубликовано: 26 ноя 2024
- #basemap #tuning #haltech #haltechTECH
A Base map, as the name suggests is a base to start working from in order to get your engine up and running as quickly and easily as possible. A Base Map has as much information entered as possible, leaving only the settings unique to your setup left to add in. In this video we show you how to load one, what's included and where to find them in the Haltech ESP software.
-----------------------------------------------------------
The best way to familiarise yourself with base maps and learn how they work is to try them out. We have included a whole bunch of base maps and actual tune maps for you to play with below. Have fun!
Haltech Base maps: www.dropbox.co...
Haltech tuned maps with Datalogs: www.dropbox.co...
-----------------------------------------------------------
Liked this video? Here are more like it:
How Flex Fuel Works: • 💬 How to Flex Fuel | T...
How Dyno Tuning Works: • 💬 Dyno Tuning Basics ...
How CO2 Boost Control Works: • 💬 How CO2 Boost Contro...
------------------------------------------------------
Don't miss out on our next video - subscribe to our channel.
------------------------------------------------------
For more Haltech goodness check out our:
Website: www.haltech.com
Facebook: / haltechenginemanagement
Instagram: / haltechecu
~-~~-~~~-~~-~
WATCH NEXT: "🏅 Jason Waye's Barra Powered Fox Body | HALTECH HEROES"
• 🏅 Jason Waye's Barra P...
~-~~-~~~-~~-~
Today we're talking Base Maps!
A Base map, as the name suggests is a base to start working from in order to get your engine up and running as quickly and easily as possible. A Base Map has as much information entered as possible, leaving only the settings unique to your setup left to add in. In this video we show you how to load one, what's included and where to find them in the Haltech ESP software.
-----------------------------------------------------------
The best way to familiarise yourself with base maps and learn how they work is to try them out. We have included a whole bunch of base maps and actual tune maps for you to play with below. Have fun!
Haltech Base maps: www.dropbox.com/sh/53ltegvg32kdbhn/AADvAkJabhmfb8B8huDROuh6a?dl=0
Haltech tuned maps with Datalogs: www.dropbox.com/sh/74c8yev7atvd5id/AABtHAt1PAJe8QuecReCVfSWa?dl=0
I looked at your Base Map list.... Under Ford, all I saw was 4L Barras.
I know a great Engine, but I'm in the U.S. and work on older, less mainstream stuff...
Do you have Base Maps for 4.6L 2V V8, 96-04?
Or 3.8-4.2L V6, 96-06?
finally !! a short but GREAT basic tunning video !! we need more !! specially idle tuning, if u have a slow car (for any reason) or u have problem making HP or TQ but u have a nice idle ull have nice costumer.
THANKS A LOT
Why did I sense a bit of sarcasm when he said LS is everyone’s favorite engine? It’s ok I get it. But eventually you will have to accept the universal truth that the LS V8 is the greatest performance engine ever created. I hear the GM engineers that designed were not really the guys who created it, but merely channels for God himself to bestow onto mankind this wonder of the universe. I want a Haltech ecu controlling gods creation in my project.
good day guys, do you have a basemap for a dc5 type s with full bolt ons? cheers
@@alitoroganan2442 Hello Ali, this inquiry would best be dealt with via email.
www.haltech.com/contact-us/
I don’t even have a Haltech ECU, I just really love the informative stuff you guys provide.
I especially liked the fact that you recommended getting the software even if you don’t own a Haltech, just to learn stuff.
One day I hope to be able to build my dream car, your tech will definitely be considered when the time comes.
Thanks guys
This is one of the reasons why Haltech is so good. I’m proud to have a PS2000 in my car 👍
Me too I've got a PS 2000
Amazing! This was my support ticket question no more than a week ago. Thanks Scott, and the whole Haltech team.
@Haltech the link for the base maps no longer works. is there a new link?
As someone who only has access to a 50cc two stroke scooter, but dreams about a pimped out RX-7 it is SO cool that I can fiddle around with this stuff even though I don't have the actual ECU. Thanks guys! :D
Im looking to turbo my E46 325ci next year, i will be choosing Haltech for my ecu. Such a great channel and all of the work with mcm and bennys cresta is amazing.
Thanks for putting this info out there... So many tuners and even user forums who are supposed to be helpful treat basemaps like super secret fbi files
I just came here (& subscribed some time ago) to listen to Scott speak.
Hi,
links for base maps and tuned maps with datalogs don't work, it says that the files are deleted from dropbox. Can You reupload them so they are available for download?
Kind regards.
I’d like to see the tuning process from start to finish just to get an understanding of what order I should be tuning my ECU, and also what’s absolutely essential to configure and what’s not a necessity (redundant sensors). The videos are great and informative but they’re a little too scattered and not so involved.
and cant download the files they have on dropbox
Haltech is the shit. Later this year I'm building a 1979 Camaro with an LS. Definitely using Haltech for engine management.
Set the VE map to 70% and ignition map to 20° BTDC. Pretty much anything will fire if you've got the injectors and triggering configured correctly ;)
Nice one Scott, I always know that it’s going to be worth watching whenever you appear on the screen in front of me.
Awesome work! the 280kw Tuned S15 example is going to come in real handy!!
Nice job tuning fork👊🏻😁
this link no longer works
nice video man ! i tried to download it from your link but it says that the file is deleted , please help
the tuned maps from the description were deleted :(
anyway, is there any base maps for BMW’s M54B30 ? thanks.
Hey Scott, could you do a video on diagnosing electrical faults with sensors/wiring when using the Haltech ecu? What tools and options does the Haltech have to help find the issue/fault? Thanks for the technical videos!
base maps are not available at given link ... plz help me @haltech
Scotty what is your thoughts on a base map for run in tune?
0:37 now I'm wondering whats in the Base Maps folder then xD
is it possible to pull maps out of factory ecu and use it as a base map?
So glad i clicked on this video.
Scottie is the best.
So I can load a base map and go hit 30 PSI right? Thanks, Tuning Fork!
Download it in no time !!!
Base map for a 6g72 sohc 12v pajero turbo with individual coils on an elite 1000? 😂 I have one of those I'm turning currently
Is there a place on the forum to share your custom base maps for odd engines that are not already included? I'd enjoy sharing my work with others, I might be a pro but anymore I just do this for the fun
HALTECH needs to do a proper video on cold start and how to set it up and demonstrate it in all different conditions and how it works to get the car started and idle as to anyone desire. I HAVE BEEN TRYING FOR 4 MONTHS! on this bmw turbo conversion to get it started and running as I like, 1st start after three weeks ran perfect with leaking intake gasket just idle very high, 2nd start after head gasket change wrong gasket i may add and intake gasket custom made and fix, after just had looong cranks had loads of very violent back fires before it ran then dies, 3rd start ran after extreme long crank then dies as throttle been applies, now wont start tries to now getting clear flood and fuel limitations and also the odd violent back fire, tps loosing calibration some times donno how voltages within ranges! am about to give up i think they just way over engineered the elite 2500 sometimes things are best kept simple till what needs to be added can be added like hondadata. fuel is there spark and compression, using 335i igniters as they are plug and play, chineese rods, 4g63 85mm weisco pistons 1 mm block over bore to fit, 340lph fuel pump with check valve, knock off areomotive fpr, wbc2 controller, elite2500, 875cc injectors, mack boost controller, aem meth kit, 38mm wastegate, 50mm bov, turbo is a borg warner like gtx55 off a man truck, using BMw x5 throttle body works100%, had 4g63 intake custom to fit. was just about to do the rear diff conversion in the e46 to e60 m5 axles and propshaft and was also going to put some darton performance sleeves in block with some s54 valve springs to up the revs to 10k. its a one off custom project I decided to do in my weekends when not working. Engine n42b20 (valvertronic but disabled) this thing is pissing me off need some drastic help. the elite 2500 is a brilliant ecu with its functions but can be very confusing to operate when starting to get running, lot of the features is excellent just a shame tourque management feature are not full 100 like the 2500T ecu, base maps that are preset works fine just may only have to lower and increase rpm to suit application, adjust drigger settings and fuel and ignition. it is one smart piece of gadget am well pleased with my 2500 just a bit hard to navigate at times for the haltech is a new learning curve for me but like it 100% all the way done think I will go other brands except aem. it is shame bmw can communication is not present in 2500 and could be preset to work with factory clusters
I just bought an Elite1500 for my RX-7.
One of the reasons is the excellent support Haltech seems to give.
Im very looking forward to have it installed and tuned.
3:42 Downloading it right now, probably won't tune a car for a few years but its my dream to do it professionally
Did you speed up the open map process? My desktop PC doesn't load maps that quick with a NVMe SSD and i7-6700K
Will there be improvements to the speed for the Haltech software when connecting to the ECU's?
Thanks Scott great vid as always I'm slowly working my way toward downloading tuneecu which was used to tune my bike just so I can check fault logs & save a copy of the map should I need it, I'm not good with tech of any sort I'm a bit intimidated by it & don't know of a tuner in my area who uses this software. Question I'm about to do an engine swap on my bike same engine just less km's same set up, are there any issues with just plugging the original harness & ecu into the fresher motor.
I clicked on the BASEMAP link on the description and are they not available anymore? Im planning of getting the R3 for my Lotus 2ZZ. How can i get a basemap of my car? Thanks.
Is there a way to just get your cars stock tune ??
Oil leaks after build? What even is this? We are all perfect and every build is without flaw. Every time. Anytime. We can all agree on that I think!
Any chance you guys will reupload the completed maps with logs? The dropbox link as stopped working
Do you have a base map for dacia 1300 (factory carburated).
????
hi I'm chasing a Suzuki swift gti mk2 g13b engine, I have a sprint 500 being wired up now
Also looking for this base map!
@@gtschallenges9733 You dont NEED a base map, its a luxury. Any EFI tuner who knows what they are doing knows how to get your car going.
The files in the links are deleted, please give us new links sir
Is there support like this for honda k20 im in 2 minds whether to go haltech or Kpro
I'm looking for a base map for a twin turbo ls3 running haltech coils 1000cc injectors.therr doesn't seem to be any on your software
unfortunately base and tuned map links are not working anymore . can i get them anywhere?
All Elites have now been upgraded to the NSP software which includes all the base maps:)
@@haltech how much does that software costs and i wonder if it would be good for my x5 e70 diesel and f32 with n26
Hi there. Great job.
The links to Base maps and tuned maps are deleted. any new links?
Hey, is there a way I can download my stock tune directly from my car? It's a 97 GM brand you don't have. And also an oddball I should add. Saturn SC1.
I swear to god, As soon as the haltech software gets a dark theme or custom themes i am going to cash out on a elite 2500
NSP has that. Elite will get access to NSP soon.
Subscribe to our mailing list for ASAP notification when that firmware goes active. I promise we don't send useless spam.
My fuel pressure goes up and down by 8 psi constantly.
Is this normal?
I can't find any SR20VE base map.
Is it recommended to load up DE/DET map instead?
Volumetric efficence will be very different due to the variable valve lift.
How much extra time will it take the tuner if you don't have a base map?
Do you need a Mac or PC to open and view the base maps? I have a Mac, it will download but not open.
Links are broken😭
the links for the maps arent there anymore.
How do you make a base map if you can't find a premade base map?
Y is there no base maps for the newer imprezas
How come no basemap for USDM 2017 newer STI?
does the Haltech units control LPG injection as a matter of course or does anything special have to be implemented for it to operate.
Yes it will control LPG injectors.
@@haltech can you switch between LPG and gasoline?
does it work with FA20 subarus?
Scott what System would you suggest for a toyota beams single vvti with nos but still full sequential. i want to turbo at a later stage but for now i need something that can retard the timing for me without going into the maps when i hit the NOS. Or is it not possible for a ECU to do that for you?
Any base maps for a inject 302 Windsor yet?
the basemap drop box links no longer work
Question does a tune void warranty and can a dealer see your car has been tuned after you went back to factory?
That's not a question we can answer, unfortunately. You'd need to ask the dealer.
@Haltech No base maps for 3.8L commodores tho -_-
No BMW basemaps Scotty?
I'm in a bind, I need an ecu for my 3rz-fe Hilux surf, I was looking into going standalone just to get the engine to run, I can currently find no right ECU to buy, so a stand alone is looking like an good option, any ideas if the haltech will run my na 3rz-fe?
Elite 750, 1500 or 2500, depending on what you're planning to do with the car. Gabe from SNP Speed Innovations does a lot of work with the 3RZ and Haltech ECUs:
ruclips.net/video/URwn6jJ8OdQ/видео.html
ruclips.net/video/h6vovblINRU/видео.html
There's no base map for a small block mopar. Am i most likely best off trying to use a ford or gm small block base map or start from scratch?
Hi Brian - contact our tech support on support@haltech.com one of our guys will be able to help you out.
@@haltech will do, thanks so much for the lightning fast reply! 😃
What happened to the Dropbox links ?
The links don't work, can someone help?
Can you connect the ecu with an OBD2 port?
No, you can't
Hey I’m running a supraLink g4+ but I’m thinking of jumping to Haltech 2000 elite. Would this be worth it? Just a street car that will take to the strip now and then, forged motor bigger turbo etc etc
We'd say yes but then we're kinda biased....
In all seriousness it's best to talk to your tuner and find out what system he's most experienced with.
Haltech yea there haltech. From what I’m seeing it’s looking like I’ll switch to haltech in the future
...your links to the maps dont work.
Do u make an ecu to program your children.. to do what's asked the "first time?"
Have you tried turning them on and off?
Got the elite 2500 with NSP ecu manager and i tried to load one of these ESP map for the rb26 and it won't let me....can you guys help me out please?
Of course! Shoot a message to our tech support team via www.haltech.com/contact-us
They'll be happy to help out :)
Hello! I downloaded haltech esp, then tried to open honda 185kw map and had a problem: the programm asked about elite 1500 2.35 definitions, and i dont have them...
Register for an ESP account and the software downloads it for you.
Øystein Garmo thank you! I will try
the only thing i dont like is the base maps for s13 with ca18det are for the elite 1000 or 1500, their is no base map for a 750 so i had to start from scratch :(
contact our tech support on support@haltech.com. one of the guys will be able to help you out.
thumbs up
Hi there, lm trying to find a baseman but link is not working. Ls1 ps2000
Please contact our technical support team via www.haltech.com/contact-us
They'll be more than happy to help you out
Ooh, bass, yes please, oh wait, diffent base.
I'll show myself out.
Is this an 100% Australian made product?
Designed and manufactured in Western Sydney
"Nice wiring Marty"
Marty thinking, yes nice like Sheryl.
anything for Diesels in Europe?
Nothing for diesel at all, sorry
The tuned maps are not in dropbox
Sorry, that's an old video, the dropbox link is no longer valid.
bring the base maps back online plz
The files have been deleted....
Can't open base maps without password. It figures...
Deberías ver la posibilidad de traducción en Español!!!!!
A bit disappointed to see Scotty amped up on this and then "File Deleted" on the links :(
Sorry we changed our dropbox account - we'll fix that link shortly.
@@haltech still deleted?
I don't know nothing..but I will like to play a little bit with my car...any link so I can download the maps and any tips for laptop I should use..👍
A lot of people want to use it but to expensive ,if you guys make like a cheaper version people may start to get them more , no hate I know is an amazing product but many of companies just make things for the people that really have money to spend, but people that work haard and have sport cars and want to upgrade isn’t possible cuz most of the money they make is just to pay bills
10 out of 10 disappointed he didn't make that pop noise when saying MAP each time in this video.
Hi Scott. Fucking love your channel, and your content. BUT where is the BMW folder? I know they arent that popular in Aus, but still. Im from Denmark and the best ECU i can get with easily available support is an Elite 2500. Its still one of the most expensive ones, especially when you consider all the crap you need besides the ECU. But still cheaper than a Syvecs, which pretty much has 0 forum support like yours.
Loved this video so much till he said data Differences between English and American language makes me laugh to much, thanks for the video though helped alot
selling download links
Have you ever put a Haltech in a motorcycle?
Many!
@@haltech that's sweet, I've been wanting to convert my bike from carby to EFI and was debating one what kind of ecu to user
???? 1uz fe ?? maps
sadly all maps have been removed. so no knowledge gain here!
You LIE!
You never told how Base Maps Work!
:)