Electrolux Professional W575H - Ultimate WHITES 80°C with Soak + Pre-Wash (Custom programme)
HTML-код
- Опубликовано: 2 июл 2024
- Video Time Stamps:
0:00 - Loading the laundry, the detergents, Programme setting
2:17 - Start of "Soak phase" (High waterlevel)
3:33 - Soak, 35'C reached - Tumbles 10sec ON/1min OFF
5:51 - Drain after the Soak phase
6:30 - Start of Pre-Wash+Heat upto 40°C (Low waterlevel)
7:42 - Pre-Wash, 40°C reached (5 minutes wash time)
9:15 - Drain after the Pre-Wash
9:53 - Start of Mainwash (45'C Hot water intake - Medium waterlevel)
10:06 - Enzyme phase 45-48'C for 5' minutes
11:42 - Mainwash, heating upto 80'C
12:41 - 80°C reached, 12 min wash time - Tumbles 25sec ON/3sec OFF
17:08 - Quick Cool-Down
17:21 - Spin-Drain after the Mainwash (1000 RPM)
19:47 - 1st Rinse (2 minutes duration - Medium waterlevel)
21:12 - Spin-Drain after the 1st Rinse (1000 RPM)
23:36 - 2nd Rinse (2 minutes duration - Medium waterlevel)
24:49 - Spin-Drain after the 2nd Rinse (1000 RPM)
27:14 - 3rd "last" softender Rinse (2,30 minutes duration - Medium waterlevel)
28:37 - Spin-Drain/Final spin with 1245 RPM
30:20 - Speeding upto 1245 RPM
31:13 - Slowing down/End of the programme
32:07 - Water consumption for this load =102,6L Cold, 12L Hot water
Here i'm washing a load of whites on my custom "Ultimate WHITES 80'C" programme made in ELS Laundry Manager 6 software, this programme is made as seen below: 👇👇
1: No AWS load Weighting.
2. Soak with high waterlevel - Heating to 35'C - 10 min wash time - Tumbles 10sec ON/1min OFF, 52 RPM.
3: Pre-Wash with low waterlevel - Heating to 40'C - 5 min wash time - Tumbles 15sec ON/4sec OFF, 52 RPM.
4: Mainwash with medium waterlevel and hot water intake - Heating to 80'C with 5 min Enzyme phase at 45'C - Intensive tumbles 25sec ON/3sec OFF.
5: Quick Cool-Down.
6: 3 rinses with medium waterlevel - 2 minutes each - interim spins at 1000 RPM.
7: Final spin with 1245 RPM - 6 minutes.
Here is some data about the machine: 👇👇👇
Model: W575H - Compass Pro control system.
Max capacity: 8 KG (75 Litre drum volume).
Production: Made in Sweden in September 2015.
Drain system: Drain valve 50mm diameter (Water pressure controlled).
Voltage: 400 Volt 3 phase 7600 watt total power.
Machine weight: 160 Kg.
Max spin speed: 1245 RPM.
Motor and Control: Hanning 3phase motor and EWD 900 inverter control.
Water valves: 2= 1 Cold, 1 Hot (This machine is connected to both cold/hot water.
#youtube #washingmachine #Laundry #Washday #Waschmaschine #laundromat #lavatrice #pralka #laundrydetergents #camasirmakinesi #subscribe #electrolux #electroluxprofessional #madeinsweden #wascomat 
Наука
My friend Mr Electrolux 😊
Great video
Thanks! 🙂
@@Electroluxwasher your welcome
Nice 🐱
So, basically 3 x wash - how clean do you want your clothes to be? 😄
Why does it spin without completely draining first? I get the spin-drain on very old agitator washers, but here.. is it intentional?
The spin-drain is for a better load balancing before going into the actual spin and it also saves some time.
Generally this machine can be programmed to do a spin-drain or just a normal drain then spin.
Did the soak fill through the pre-wash chamber? You then added the additional detergent for the pre-wash (a bit like they do when you have 2 pre-wash).. or does the soak fill only through the back meaning detergent is added into the drum for the soak?
A fantastic video with a well designed / thought out wash with lots of power!
Thanks for uploading 👍😊
Also, do I notice the spinning is in the other direction? Is this to do with this programming? Or have you adjusted something?
Thanks so much for commenting!
The Soak and Pre-Wash both fills from the prewash compartment, so I had to add detergent 2x times just like you said 🙂
@@TheLaunderetteExplorer_uk Yes that's right I changed the spin direction from left to right in the factory menu were you need a special code to enter, my friend knows an Electrolux technician who gave me the code to enter the menu.
The changes you make in this menu will be valid for all programmes on the machine, also enabled it to tumble both ways at the water filling instead of only tumbling the right way 😎
@@Electroluxwasher excellent.. I noticed the 2 way filling tumbles too - although I did think this could be programmed too (or maybe not!). I think 2 way tumbles for fill would remind me of the 3000 series as that’s what they did!
@@David_Laundry_Beko_Toad because it’s had an adjustment made in the settings.