Hi Shehab, the IQ remote acts like a secondary interface for your Main IQ panel, it will not report alarms or trigger an alarm itself (Except for sending a panic trigger). Alarm signalling is handled by the IQ panel when an alarm occurs. So, there are no signals that need to be triggered from the IQ remote unless you want to test your panic keys to make sure the main IQ Panel responds properly to your panic trigger. Once paired to your IQ Remote, you should be able to control your main IQ Panel.
Once updated to version 2.4.0 you have an option, assuming you have cameras, to stream video to the IQ Remote. We tested this with cameras, I assume the feature also works with the ADC Skybell Doorbell camera, but have not tested it. You can read more about the new upgrade here: www.alarmgrid.com/blog/checking-out-qolsys-iq-panel-2-firmware-version-2-dot-4-0
@@AlarmGrid Is it possible to not stream all your cameras on your iq remote? I ONLY WANT ONE CAMERA TO BE SHOWN. When i stream to panel all the cameras go staright over to the remote when it is paired. How Can i limit access on the iq remote?
This sounds like it could be a power issue. Do you know if the technician checked the power cable and the outlet? Did this occur while the technician was onsite so that they could see the behavior?
The IQ remote is the slowest, shittiest DELAY REACTION EVER!!! LIKE 30 SECONDS AFTER THE DOOR BEEPS AFTER I OPEN IT....AND IM STANDING RIGHT BY EACH OTHER!!!!!PLUS I have AT&T WIFI OVER 1000 WHICH IS PRETTY FAST WIFI...THE REMOTE TAKES ABOUT 30 SECONDS DELAY OR SOMETIMES IT DOES RESPOND AT ALL.AND THE 2 DEVICES ARE SIDE BY SIDE!!!...AND IT LOSES CONNECTION!! WTF???!!! THE 2 DONT SYNC WELL AT ALL!!! PLEASE TELL ME THERE IS ANOTHER BETTER DEVICE I CAN HOOK IQ PANEL2 WITH!!
We're sorry you're having issues with the IQ Remote. Have you verified that your panel is on the latest firmware release? If there are any updates for the IQ Remote, they will come from the panel once it's been updated. There are quite a few IQ Remote related updates in 2.5.0, including WIFI improvements. As long as your panel has WIFI, updates are free. You can find information on updates here: www.alarmgrid.com/downloads/qolsys-iqpanel2plus-firmware-updates
![Lil Uzi Vert - Chill Bae [Official Music Video]](http://i.ytimg.com/vi/D7F42F_JM3U/mqdefault.jpg)
THANK YOU ... TOTALLY WORKED FOR ME... GREAT TUTORIAL!
Hey Tanya, We're glad to hear our video was able to help! 😄🎉
Helpful, thanks!
We are glad you found this helpful!
Hello. Does the IQ remote work as an extension to connect contacts?
It does not, If you need range with the IQ4 and IQ2+ use Power G devices
How do I trigger the secondary panel? I just need to send the signal to the monitoring station for it.
Hi Shehab, the IQ remote acts like a secondary interface for your Main IQ panel, it will not report alarms or trigger an alarm itself (Except for sending a panic trigger). Alarm signalling is handled by the IQ panel when an alarm occurs. So, there are no signals that need to be triggered from the IQ remote unless you want to test your panic keys to make sure the main IQ Panel responds properly to your panic trigger. Once paired to your IQ Remote, you should be able to control your main IQ Panel.
Hi
Does this qolsys iq remote streams the videos cameras and doorbell camera as well?
Once updated to version 2.4.0 you have an option, assuming you have cameras, to stream video to the IQ Remote. We tested this with cameras, I assume the feature also works with the ADC Skybell Doorbell camera, but have not tested it. You can read more about the new upgrade here: www.alarmgrid.com/blog/checking-out-qolsys-iq-panel-2-firmware-version-2-dot-4-0
@@AlarmGrid Is it possible to not stream all your cameras on your iq remote? I ONLY WANT ONE CAMERA TO BE SHOWN. When i stream to panel all the cameras go staright over to the remote when it is paired. How Can i limit access on the iq remote?
My panel 2 randomly beeps (same sound made when you plug in the power cord) any ideas? Even had tech come out and couldn't resolve it
This sounds like it could be a power issue. Do you know if the technician checked the power cable and the outlet? Did this occur while the technician was onsite so that they could see the behavior?
Buyers beware, NO DOOR BELL notifications, contrary to what they say !
The IQ remote is the slowest, shittiest DELAY REACTION EVER!!! LIKE 30 SECONDS AFTER THE DOOR BEEPS AFTER I OPEN IT....AND IM STANDING RIGHT BY EACH OTHER!!!!!PLUS I have AT&T WIFI OVER 1000 WHICH IS PRETTY FAST WIFI...THE REMOTE TAKES ABOUT 30 SECONDS DELAY OR SOMETIMES IT DOES RESPOND AT ALL.AND THE 2 DEVICES ARE SIDE BY SIDE!!!...AND IT LOSES CONNECTION!! WTF???!!! THE 2 DONT SYNC WELL AT ALL!!! PLEASE TELL ME THERE IS ANOTHER BETTER DEVICE I CAN HOOK IQ PANEL2 WITH!!
We're sorry you're having issues with the IQ Remote. Have you verified that your panel is on the latest firmware release? If there are any updates for the IQ Remote, they will come from the panel once it's been updated. There are quite a few IQ Remote related updates in 2.5.0, including WIFI improvements. As long as your panel has WIFI, updates are free. You can find information on updates here: www.alarmgrid.com/downloads/qolsys-iqpanel2plus-firmware-updates
Okay that fine just let us know if I have time for you tomorrow to get to tor to do have orange green
No penguins...
Lol me too