Hello Freddy, FYI I'm using DX7s radio, I watch your video and i set-up my align gov the way you did, and also change my throttle curve, Thank you, please don't stop upload learning video, just to watch your video you help a lot of people or pilot like me, Thanks again.
These really helped me set up my Heli the way I thought it should fly, thanks! But dude the mouth smacking was killing me, made em hard to listen to lol... No more mouth noises Freddy !
The only issue I have is when moving from normal into idle 1 or 2, because normal mid stick is +5 (flying pitch) when you go from there to 0° on idle 1 or 2 the heli drops altitude dramatically. Also, it's feels we it's as though I have to input way more stick movement to get the heli to climb or decent in the idle up modes with the 0° mid stick setting
You ever get a video of how to do all this with the radio? Wondering how to make sure when we are doing this on the radio that we can check to make sure were getting correct pitches and such! Thanks Freddy-
Hey buddy! Thanks for your time and doing this! Hey where can I go to see you programming this into the radio? (I'm running dx7s) but I just need to see it done dosnt matter the radio just need the general info! Thanks and keep up the killer work this really really helps people even more than you could imagine- later
Hey Freddy! Very well explained and illustrated! Just learned more from you! I have a question: how does Governor influence on all of it for electric helis (i have a trex 450 DFC PRO FBL). Can you make a video connecting the Governor and trhottle and pitch? Thank you so much!
Hay Freddy Early June now , just find you on this channel. enjoyed and learn , Thanks to your effort and skill , Like to see how can I optain the traning gear set up that you use in lesson 1,and 2 please Nate
hey buddy, first off yea you can add expo to dull it down but u can play with travel adj as well for diff sensitivity, also i dont like the ratcheting but its all up to you my friend
hey bud, u should be using a gov i have the align gov setup video give that a watch. also when using a gov its based on rps, so it uses your throttle curves to make its corrections. for my curves i use this ( but be aware throttle curves are based upon my flying style and helisetup) normal (o,20,30,50,80) i use normal only for hover, land, and take off thats it idle 1 (90,70,50,70,90) this is a good for sport flying (gov @ 18-1950 rpm) idle 2 (100,90,75,90,100) great for 3d (gov @2-2250)
Not recommended for all, but here's what I do. Fly one mode. ONLY!!! Flat throttle + full pos to neg pitch(max) curve. The other two clicks on mode switches both set to throttle hold. That's right. Take off/land with throttle hold. Actually, take off requires "both" throttle hold switches to be tripped. That means double safety!!! ESC set to soft start. Multiple mode = multiple heli response/feel. Don't need that unless, let someone else fly it or need drop throttle for weak batteries. I'm advanced and just learning more tricks with one heli > one mode > one feel. Not multi heli's and multi mode's = exponential "touch" that requires mastering. Peace.
+Anthony Abelardo Yes, that's absolutely right. Also, if you want to trick it even more. Add more expo to the rudder(-expo for JR/speks and +expo Futaba). Thus, with "smallest movement" you will get full rudder in either direction...but only if your fingers are ready for it...not for retired guys/w shaky fingers or beginners. Keep on.
Hi Freddy, Would you be so kind to give us your numbers that you uses for idle1. It's not. that clear for me. Thanks and Greta vid's you are making to help us setting up our heli's!!
Great informations but my TX goes from 0-100 scale. This -12 and +12 doesn't seem logical as it wouldnt add much of a curve. Can anyone please elaborate on the differences if any?? Thanks in advance!
Hello Freddy! i have a new trex 700 nitro limited edition and I dont know what is the set-up of the throttle curve, could you please make video, how to set up throttle curve, pitch curve normal and 3d mode, for nitro helicopter I really like all the video that you upload, its help me a lot Thanks a million time...
Hi Freddy i just wacth some your videos, really i like i want ask if you can make a video for mode 2 NITRO i just learning to fly i wants know how setep, also i want ask if you can make a video how setup swichs on the radio and throtle hold too THANKS Freddy for your help.
Hi Freddy, Would you be so kind to give us your settings for flight mode 1 (sport flying) it's not so clear for me what to use als setting. Thanks for THE great video's you make and THE time you put into this video's!!!!!
HI Freddy, I have a TREX 700N that is in a airwolf scale body. What would be a good starting point on pitch and throttle curves. Obviously I don't do stunts just a nice scale flying day...
I dont use a governor, i fly sport only. What would the ideal throttle curve be for nitro. Electric is fine and works great with 75% to 80% throttle lineair. Does this work on nitro or do you go from half stick 80% 90% 100%. Or 80-85-90%. Talking about half stick +5 pitch till full stick +10 to +12
It can all depend on the motor and blades and pitch EX. The best I can say is if you are not using a GOV then you need to have a V curve of some sort to compensate for the rotor disk load. Also the tuning of the motor is going to play a big role in how the throttle curves feel or make the heli feel. 80,90,100 could be a good starting point, but I am sure you will have to tweak it as you adapt it tor your own flying style.
Hey Freddy, great video 🚁🚁🚁 Thanks👌🏼 I just bought my T-Rex 450, & saw a RUclipsr recommending beginners use zero - 40% max throttle. What d’you think??💥
Absolutely not lol, your Heli will barely lift (if at all) at 40% throttle. Not to mention the crazy low head speed would translate to very poor cyclic resolution and little to no control over the Heli. These heels are designed with an RPM in mind for maximum control over the Heli. You can change the the way the sensitivities are of course, but you need head speed to fly a Heli. I hope this helps :)
Freddy Cordova Yes that does help - thanks!! 🌈 I’m used to 4 channels and without going inverted, I want to start punching it! BUT I’ve been told to check the settings on the included A10 transmitter first (a bit fiddly). It does make sense for 2 reasons: higher head speed = more stability like a bicycle wheel spinning. Plus the blades are more stable at higher airspeed like aeroplane wings - they want to stall at low speed through the air - right? Great to get some feedback! I’m Martin by the way 👍🏻. Check this: ruclips.net/video/GvRjoZGVpZw/видео.html
PS. Having the 450 tied to my workbench, neutral pitch, 100% head speed is vicious! I’m scared of any sudden or unstable inputs when I first take her out! 😬😬
helo my friend and thanks for the comment, i will be makin a better revised curves vid here soon. but if u cant wait please feel free to call or tex me at 801-654-2803
Please see previous reply, basically with the jump to FBL systems and on board GOV the throttle curve system has changed a lot. If you need help with your system please let me know what you have and maybe I can help :)
Hello Freddy, i am a new with heli :) i have T-rex 600 nitro pro, can you write for me please pich and th curves for normal and 3d modes :) Thank you wery much :)
These settings are for a basic setup, most setups these days will vary based on which FBL system you have. A lot of them have built in GOV that altered the way throttle curves are used.
Freddy Cordova thanks for the reply .. first of all great videos ,i’ve learned a lot so far , i recently purchased trex550 and (still waiting) for it .. the heli i’ve been flying is walkera 450d03 with devo 7 and trying to convert it to my taranis as trex will be my primary heli, any tips or setups would be great
Hello Freddy, FYI I'm using DX7s radio, I watch your video and i set-up my align gov the way you did, and also change my throttle curve, Thank you, please don't stop upload learning video, just to watch your video you help a lot of people or pilot like me, Thanks again.
Thank you for sharing your knowledge . Super helpful. Wish I lived next door 😎 Larry.
Thanks for watching!
These really helped me set up my Heli the way I thought it should fly, thanks! But dude the mouth smacking was killing me, made em hard to listen to lol... No more mouth noises Freddy !
Hi nice video it should help those that are new to the rc helis keep it up freddy
The only issue I have is when moving from normal into idle 1 or 2, because normal mid stick is +5 (flying pitch) when you go from there to 0° on idle 1 or 2 the heli drops altitude dramatically. Also, it's feels we it's as though I have to input way more stick movement to get the heli to climb or decent in the idle up modes with the 0° mid stick setting
What are the settings for Idle 1 ?
It would be very nice and I would appreciate it so much if you did the same throttle and pitch curve configuration for nitros.
You ever get a video of how to do all this with the radio? Wondering how to make sure when we are doing this on the radio that we can check to make sure were getting correct pitches and such! Thanks Freddy-
Sure Fred please make some video for nitro pitch and throttle curve specifically..
Hey buddy! Thanks for your time and doing this! Hey where can I go to see you programming this into the radio? (I'm running dx7s) but I just need to see it done dosnt matter the radio just need the general info! Thanks and keep up the killer work this really really helps people even more than you could imagine- later
Hey Freddy! Very well explained and illustrated! Just learned more from you! I have a question: how does Governor influence on all of it for electric helis (i have a trex 450 DFC PRO FBL). Can you make a video connecting the Governor and trhottle and pitch? Thank you so much!
Hi,
What is your idle1 setup ? Jumped from normal to idle2...
Hay Freddy
Early June now , just find you on this channel. enjoyed and learn , Thanks to your effort and skill ,
Like to see how can I optain the traning gear set up that you use in lesson 1,and 2 please Nate
If you are asking about the training set for a live action Heli, most hobby stores will sale them or you can make a set pretty easily.
Thank you so much!!
Your welcome :)
hey buddy, first off yea you can add expo to dull it down but u can play with travel adj as well for diff sensitivity, also i dont like the ratcheting but its all up to you my friend
thanks buddy very much
same to you my friend
good job make,,i start learn,,tanks
hey bud,
u should be using a gov i have the align gov setup video give that a watch. also when using a gov its based on rps, so it uses your throttle curves to make its corrections.
for my curves i use this ( but be aware throttle curves are based upon my flying style and helisetup)
normal (o,20,30,50,80) i use normal only for hover, land, and take off thats it
idle 1 (90,70,50,70,90) this is a good for sport flying (gov @ 18-1950 rpm)
idle 2 (100,90,75,90,100) great for 3d (gov @2-2250)
+12 and -12 is the degrees of the blades on a curve point, add a pitch Gage to the blades and set accordingly.
So to be able to fly 3d you have to setup your normal flight mode to negative 12 to positive 12
Not recommended for all, but here's what I do. Fly one mode. ONLY!!! Flat throttle + full pos to neg pitch(max) curve. The other two clicks on mode switches both set to throttle hold. That's right. Take off/land with throttle hold. Actually, take off requires "both" throttle hold switches to be tripped. That means double safety!!! ESC set to soft start. Multiple mode = multiple heli response/feel. Don't need that unless, let someone else fly it or need drop throttle for weak batteries. I'm advanced and just learning more tricks with one heli > one mode > one feel. Not multi heli's and multi mode's = exponential "touch" that requires mastering. Peace.
+trexinvert High throttle idle-up is the answer to lack of tail authority.
+Anthony Abelardo Yes, that's absolutely right. Also, if you want to trick it even more. Add more expo to the rudder(-expo for JR/speks and +expo Futaba). Thus, with "smallest movement" you will get full rudder in either direction...but only if your fingers are ready for it...not for retired guys/w shaky fingers or beginners. Keep on.
trexinvert or just run no expo on the rudder
I need to run idle-up because I'm on a 5-rotor with stock blades and gearing.
Freddy happy thanksgiving to you and family.
Hi Freddy,
Would you be so kind to give us your numbers that you uses for idle1. It's not. that clear for me. Thanks and Greta vid's you are making to help us setting up our heli's!!
will you do a video for idle 1 setup please.
Great informations but my TX goes from 0-100 scale. This -12 and +12 doesn't seem logical as it wouldnt add much of a curve. Can anyone please elaborate on the differences if any??
Thanks in advance!
Hello Freddy! i have a new trex 700 nitro limited edition and I dont know what is the set-up of the throttle curve, could you please make video, how to set up throttle curve, pitch curve normal and 3d mode, for nitro helicopter I really like all the video that you upload, its help me a lot Thanks a million time...
freddy can i have the pitch curbs 0-+5-+10 for a flybarless, cause i thought u got to have o at mid stk.
Where is the 2nd video in this series? I mean the setup for idle 1?
This all kind of changes with FBL systems and GOVS so I address it in those more recent vids.
Hi Freddy i just wacth some your videos, really i like i want ask if you can make a video for mode 2 NITRO i just learning to fly i wants know how setep, also i want ask if you can make a video how setup swichs on the radio and throtle hold too THANKS Freddy for your help.
Hi Freddy,
Would you be so kind to give us your settings for flight mode 1 (sport flying) it's not so clear for me what to use als setting.
Thanks for THE great video's you make and THE time you put into this video's!!!!!
+erik van havenbergh It's linear pitch curve 0 25 50 75 100. On throttle curve 1 you can just have like 85 82 80 82 85.
HI Freddy, I have a TREX 700N that is in a airwolf scale body. What would be a good starting point on pitch and throttle curves. Obviously I don't do stunts just a nice scale flying day...
Hey David thank you for the message, shoot me an IM or a face book message and we can explore some options :)
I dont use a governor, i fly sport only. What would the ideal throttle curve be for nitro. Electric is fine and works great with 75% to 80% throttle lineair. Does this work on nitro or do you go from half stick 80% 90% 100%. Or 80-85-90%. Talking about half stick +5 pitch till full stick +10 to +12
It can all depend on the motor and blades and pitch EX. The best I can say is if you are not using a GOV then you need to have a V curve of some sort to compensate for the rotor disk load. Also the tuning of the motor is going to play a big role in how the throttle curves feel or make the heli feel. 80,90,100 could be a good starting point, but I am sure you will have to tweak it as you adapt it tor your own flying style.
@@33forsaken Thanks Freddy, i could not ask for more, thank you for your thoughts 🙂🇳🇱
Hey Freddy, great video 🚁🚁🚁 Thanks👌🏼
I just bought my T-Rex 450, & saw a RUclipsr recommending beginners use zero - 40% max throttle.
What d’you think??💥
Absolutely not lol, your Heli will barely lift (if at all) at 40% throttle. Not to mention the crazy low head speed would translate to very poor cyclic resolution and little to no control over the Heli. These heels are designed with an RPM in mind for maximum control over the Heli. You can change the the way the sensitivities are of course, but you need head speed to fly a Heli. I hope this helps :)
Freddy Cordova Yes that does help - thanks!! 🌈 I’m used to 4 channels and without going inverted, I want to start punching it!
BUT I’ve been told to check the settings on the included A10 transmitter first (a bit fiddly).
It does make sense for 2 reasons: higher head speed = more stability like a bicycle wheel spinning.
Plus the blades are more stable at higher airspeed like aeroplane wings - they want to stall at low speed through the air - right?
Great to get some feedback! I’m Martin by the way 👍🏻.
Check this:
ruclips.net/video/GvRjoZGVpZw/видео.html
PS. Having the 450 tied to my workbench, neutral pitch, 100% head speed is vicious! I’m scared of any sudden or unstable inputs when I first take her out! 😬😬
helo my friend and thanks for the comment, i will be makin a better revised curves vid here soon. but if u cant wait please feel free to call or tex me at
801-654-2803
89/92/95 will give you a slightly smoother throttle curve.
Hi can you please post for mode aka stunt 1
Please see previous reply, basically with the jump to FBL systems and on board GOV the throttle curve system has changed a lot. If you need help with your system please let me know what you have and maybe I can help :)
Nitro heli flight curve please!
Hello Freddy, i am a new with heli :) i have T-rex 600 nitro pro, can you write for me please pich and th curves for normal and 3d modes :) Thank you wery much :)
Your new to the heli world and you are starting with a T-Rex 600..Please be carful and you might want to get a micro heli
thank you! i will think about a micro heli :) You are the best! i am your fan!
i do not recomend and sr but the 130 x all the way
It would be very nice and I would appreciate it so much if you did the same throttle and pitch curve configuration for nitros.
What are the settings for Idle 1 ?
These settings are for a basic setup, most setups these days will vary based on which FBL system you have. A lot of them have built in GOV that altered the way throttle curves are used.
Freddy Cordova thanks for the reply .. first of all great videos ,i’ve learned a lot so far , i recently purchased trex550 and (still waiting) for it .. the heli i’ve been flying is walkera 450d03 with devo 7 and trying to convert it to my taranis as trex will be my primary heli, any tips or setups would be great