@@GoTimeUTV With that jack your using & the wooden boards, I welded length of 2-1/2" diameter thick wall galvanized steel pipe to the jack head and now my jack lifts my XRC from the HMWPE skid plate without the need for extra packing. Use a car stand too so your not relying on the jack alone to hold the car up.
Check this one out www.amazon.com/LEXIVON-2-Inch-Torque-33-9-338-9-LX-184/dp/B07MKSJ4SG/ref=mp_s_a_1_19?crid=11EG0ZO12WZ39&keywords=500+lb+torque+wrench&pscroll=1&qid=1652676724&sprefix=500+lb+torque+wrench%2Caps%2C107&sr=8-19&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840&wIndexMainSlot=30
Great job, very clean work!!!
Thank you 🙌
Before removing the hub nut I make a mark with a paint pen across the castellated nut & axle so it's easy to get it back to where is was torque wise.
That's a good idea. I will keep that in mind next time I do it.
@@GoTimeUTV With that jack your using & the wooden boards, I welded length of 2-1/2" diameter thick wall galvanized steel pipe to the jack head and now my jack lifts my XRC from the HMWPE skid plate without the need for extra packing. Use a car stand too so your not relying on the jack alone to hold the car up.
I for sure need a better set up with my jack and yeah not sure how I forgot to use my jack stands I usually do though 😬
You really should have an impact socket (black) when loosening and tightening that axle nut! 30mm too!
I know, but I'm poor 😅. I recently got a kit but only went up to 24
Unless your strictly playing in mud and water you're severely overgreased my friend and the bearings will fail prematurely
Since the regrease I've mainly been riding in dirt and sand. It's almost time for me to go over everything I will make sure to check them 👍
What torqe wrench did you use? Since most i can find only goes up to 150 ftlbs
Check this one out www.amazon.com/LEXIVON-2-Inch-Torque-33-9-338-9-LX-184/dp/B07MKSJ4SG/ref=mp_s_a_1_19?crid=11EG0ZO12WZ39&keywords=500+lb+torque+wrench&pscroll=1&qid=1652676724&sprefix=500+lb+torque+wrench%2Caps%2C107&sr=8-19&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840&wIndexMainSlot=30
I thought to much would pop your seals out,because of to much pressure
I haven't heard of that
Haha, biggest sxs scam ever