I just got a new Engwe EP-2 PRO, basically the same controller, battery and motor set up on a very similar frame. I was able to set max speed at 60 kph, I put volts from 18.5 to 22.5 and the ssp was not locked and not on slowest, it was already set on 1 and it's Brilliant! Thanks for the tips!!! It's really FUN!
Hello. I just found your video. Great explanation. When you did change the Speed Limit, did it change the top speed when using throttle only? My bike only changed top speed for PAS, throttle only remains at 20mph top speed.
Hello, if marking on controller is that it can give max 20Amps, what will hapen when you set it to 25Amp? Will it destroy controller or motor? ( on my Engwe controller is Max 18Amp, and according that factory setting is also 18, but i can change it up to 25...what will happen if i set it too high?) BR Neno
Good video. Lots of these settings cross over to many bikes. I picked up a Fucare Scorpio and it is an awesome bike. Have you looked at one? Only complaint people have is the 20mph throttle only speed, I found out you can get their upgraded controller and display for $79! Then you get 28-32 throttle only. Even comes with bmx bars!
The single best tutorial on the programming. I subscribed. Unfortunately, I couldn't find the solution to my issue. My level 5 throttle accerares to top speed, then reduces to half speed over and over. It's almost as if it's activating a governor and can not maintain top speed. Any thoughts?
hello. inadvertently change the factory values of the VOL load configuration. What would be the appropriate values for 1-2-3-4-5? Excuse my ignorance, I recently bought the bike
Hello from uk , I’ve the same lcd display on my X5 e-bike. How do u change the kph to mph as I’ve tried following the Rzoguwex RUclips video but it’s all Chinese and no help at all. Would you be kind enough to show how to do please for us peeps who are abit clueless, many thanks !! Good vids , subbed 😊
One my LS setting it’s set A0 out the box ? What’s that mean ? When I press the minus it goes down to 99kmh . I haven’t changed it thoe cuz I don’t wanna get an error code
I was wondering if you can help me. just got my bike and throttle not working pedal assist works. is there a setting i have to change to get this working.
Thanks for the great help tios! I've just bought an Engwe EP2 Pro, which is the same bike, so one of them has obviously been rebranded.. My bike is misbehaving; it's reading a way faster speed than im doing, and its cutting in & out. I'm wondering if the 2 problems are related, in that the motor is cutting out because the bike thinks it is going too fast.. Can you tell me how to do a factory reset if the cintroller, in case it has just been messed with too much, & the poor thing is somply confused? Thanks, P
Nice video👌 I'm just thinking about the max amps on the controller and battery, does that have to do anything with this amp setting? I mean if u could possibly burn the battery or the controller?🙈
Game changer! Thank you bro! Anyone know what that first menu is, seen at 0:35? It says 'tC' I went in there and its a basic Y or N setting. Also looking for a link to the manual for the controller if anyone has it - its not on the Friend site. Thanks yall
A separate issue: what are the voltage settings for the battery level indicators? I'm having issues with the battery level display not reducing as I start to lose performance from battery drain (at least that's my thought right now). Recently, I changed those settings...but I might have made a mistake. So getting the correct numbers would be nice.
The way to set up the Volts is 1 which is the lowest bar is set to as follows 1=400 2=44.5 3=46.5 4=47.5 5=49.0, hope this helps I have the same bike as you.
Great and informative video David, thanks. Regarding the "Walk Mode", how do I go about turning it off because I think I might have accidentally turned it on and now my bike just crawls at every settings.
I did max settings when I raced against the Amp Rides bike. I had to revert some back because my mom rides the friend bike. I’ll do a ride video again at max settings soon
if you come across the speedrid Amazon bike settings I would appreciate it no doubt for sure or even a reset button I am seriously need to fix that bike messed with the settings can't put it back to normal no way to get in touch with the company for the schematics
I ordered my first eBike, does changing the power output of the motor (giving it 1350 watts) make the hub motor run hot? I feel like its like changing the advance on my radio control electronic speed controller and that makes them run hotter. I'm used to electronics that are very similar to eBike motors and speed controllers but im by far no expert. I may not even change them but if it is essentually free power without harmful side effects, i would definitely want to do it. If i end up keeping it rather than selling it (just using it for commuting as it is much more useful right now than a vehicle) i might put another $1000 into it to make it a 1500 watt system. Yes, i already know the laws associated with the classes of ebike and the rules concerning bike trails and traffic use. After this short stint of using it for commuting, i wont need to use it where i have to worry about the laws. I might at that point buy a Specialized class 3 bike unless the bike ive got on delivery can be modded to fill that niche.
@@perrygogas idk when I go into my LS settings in stead of a speed it says A0 and when I press minus button it goes down to 99kmph but even when set to 99 it still only goes 20 mph
@@OzaruPrince Same here my max speed is 35 kilometers/hour approx 20 miles. I won der how we can cancel the limit as the motor is supposedly 750W and not 250W
I'm not allowed to have a twist grip, not even when it's deactivated, now I've deactivated it and put it in the back of my side pocket, because when I remove it from the controller, the display always shows Error 22 instead of my speed and I can't make many settings. Does anyone have any experience of how to bridge the situation where the controller thinks there is a throttle grip on it? I don't need a gas grip either, I have an e-scooter without pedalling
Having problems trying to make my electric bike faster it's from China Funhang it's called any idea or suggestions I've tried several things but no luck yet
I just got a new Engwe EP-2 PRO, basically the same controller, battery and motor set up on a very similar frame. I was able to set max speed at 60 kph, I put volts from 18.5 to 22.5 and the ssp was not locked and not on slowest, it was already set on 1 and it's Brilliant! Thanks for the tips!!! It's really FUN!
Hello
Could you enter the voltage values in the computer's VOL menu from 1 to 5.
@@karolkordel Dont know about that guy but I put mine on 1: 45V 2: 47V 3: 49V 4: 51V 5: 54V
@@Thetimewillgoonn Thanks for your help. 😊
@@Thetimewillgoonn how do you get 54 v I thought controller us only 48
My SSP is locked and I wished the acceleration wasn't that slow
You're the man. I have almost the same interface on my eBike and the manual didn't explain things nearly good enough.
I'm not sure how you got this info. It's not in the manual like I was expecting, but THANK YOU FOR POSTING THIS INFO!!! THANK U!!
Hello. I just found your video. Great explanation. When you did change the Speed Limit, did it change the top speed when using throttle only? My bike only changed top speed for PAS, throttle only remains at 20mph top speed.
What bike do you have?
Hello, if marking on controller is that it can give max 20Amps, what will hapen when you set it to 25Amp?
Will it destroy controller or motor?
( on my Engwe controller is Max 18Amp, and according that factory setting is also 18, but i can change it up to 25...what will happen if i set it too high?)
BR
Neno
i put mine on 25 nothing happens you will go faster tho
Thanks on answer, but how much faster?@@asaf384
Good video. Lots of these settings cross over to many bikes. I picked up a Fucare Scorpio and it is an awesome bike. Have you looked at one? Only complaint people have is the 20mph throttle only speed, I found out you can get their upgraded controller and display for $79! Then you get 28-32 throttle only. Even comes with bmx bars!
The single best tutorial on the programming. I subscribed. Unfortunately, I couldn't find the solution to my issue.
My level 5 throttle accerares to top speed, then reduces to half speed over and over. It's almost as if it's activating a governor and can not maintain top speed. Any thoughts?
Lmk if you figure it out
Works on ekx x21 display, thanks for the upload.
Spot on, my bike and exact same interface and different from any of my other bikes so YEA Buddy and thx!!!
How much did you get this bike for
Hi. How do I get these menus for other bike brands. It's the same buttons but these steps don't work
hello. inadvertently change the factory values of the VOL load configuration. What would be the appropriate values for 1-2-3-4-5? Excuse my ignorance, I recently bought the bike
Hello from uk , I’ve the same lcd display on my X5 e-bike.
How do u change the kph to mph as I’ve tried following the Rzoguwex RUclips video but it’s all Chinese and no help at all.
Would you be kind enough to show how to do please for us peeps who are abit clueless, many thanks !!
Good vids , subbed 😊
Have you managed to decrease the value of the ssp? Because I too remain at 4
One my LS setting it’s set A0 out the box ? What’s that mean ? When I press the minus it goes down to 99kmh . I haven’t changed it thoe cuz I don’t wanna get an error code
There's a reason they cap these things, you can overclock but I'd only slightly overclock it from stock
How do you disable the throttle acceleration?
How do I factory reset
Thanks Great Video I'm gonna try it!
Did it work?
I'm wondering what some of those totally smooth tires like they have on crotch rocket motorcycles would be like on one of these bikes.
It would be super quiet and you’ll go a little faster
Hey how are you doing
Btw, another great vid. Keep on representing us Friends. :)
Thanks Leo
I was wondering if you can help me. just got my bike and throttle not working pedal assist works. is there a setting i have to change to get this working.
Thanks for the great help tios! I've just bought an Engwe EP2 Pro, which is the same bike, so one of them has obviously been rebranded.. My bike is misbehaving; it's reading a way faster speed than im doing, and its cutting in & out. I'm wondering if the 2 problems are related, in that the motor is cutting out because the bike thinks it is going too fast.. Can you tell me how to do a factory reset if the cintroller, in case it has just been messed with too much, & the poor thing is somply confused? Thanks, P
there's a setting to change the wheel size, try to put it to the highest one. It's in the video one of the screens before the speed limit one
Thanks for the info…I have the same system on my Rattan.
Mine does not go to the CUr setting.... How can I find this setting?
How do I lock in the settings on the end?
Nice video👌 I'm just thinking about the max amps on the controller and battery, does that have to do anything with this amp setting? I mean if u could possibly burn the battery or the controller?🙈
Got my white friend 1.5 2 weeks ago :) 17.5 amp battery is faulty tho. Its gonna be replaced
Whats wrong with it
Cant charge it thru the bike
I just orderd my friend bike. Possibly try a factory reset or fast start?
if I hold the plus and minus at the same time it shows p1 p2 and p3. Do you have any idea how I can fix this?
Did the bike come with the mirrors or can you buy them, if so where
Just Remember your battery will last like 2 hrs using so much power
Can you install a Secret button
Can you explain the first setting vol
Hi all. A question. When you have the pedal assist setting. Is that also changing the speed of the bike when you turn it into 1-7 for example ?
Yes and no. Not the way you want it to. But you can change the power settings of each one. He made an earlier video about it, if that helps.
Question. After fully charging my EP2 my battery only illustrates 4 bars. Any ideas?
you need reset to factory settings, search on youtube how to reset ep2 pro, me too had this problem 😅
Game changer! Thank you bro! Anyone know what that first menu is, seen at 0:35? It says 'tC' I went in there and its a basic Y or N setting. Also looking for a link to the manual for the controller if anyone has it - its not on the Friend site. Thanks yall
trip reset
A separate issue: what are the voltage settings for the battery level indicators?
I'm having issues with the battery level display not reducing as I start to lose performance from battery drain (at least that's my thought right now). Recently, I changed those settings...but I might have made a mistake. So getting the correct numbers would be nice.
Hey the manual shows a way to set everything back to default. You should try that and start from scratch. The manual is on their website.
I have mine on 31.5 - 35 - 40 - 45 - 50
Works fine for me
I also changed mine by fault and when I charged my battery it was only on 4 out of 5. But I solved it
The way to set up the Volts is 1 which is the lowest bar is set to as follows 1=400 2=44.5 3=46.5 4=47.5 5=49.0, hope this helps I have the same bike as you.
That's the same controller some of the Rattan bikes use.
Oh really. Maybe this can help with that bikes settings too then
@@DavidBrandNew Exactly, sir! Those are the exact same settings and screens I have on my 750.
How do you show the battery percentage on that menu?
good question i also dont have that percentage on it
This screen isn't capable.
I changed settings and now my bike doesn’t show how fast I’m going mph it’s reading 9.0 instead of 28 mph how come this happen
You rock dude ! boom thxxx
Hello
Could you enter the voltage values in the VOL
computer from 1 to 5.
I believe so
What type of bike do you have?
BTW, password might be 3288.
Also you can change gears to all be slow powered. Then confirm settings. Then change a single gear to be high powered.
Up down up down left right left right A B B A! 🚀
Lol pretty much
contra bro? old man stuff 😁
Don't forget Super Contra. Most people on here don't understand your comment, tho. :)
Close, it’s actually BABA
Thanks man!! This works!
Mine is going 45kmh and i have it set to 60kmh, how do i fix this
U cant fix it the speed u set it to is the speed without your Weight added to it or its just not able to run 60 kmh as the program says
Change when diameter to largest setting and if that will also increase the speed.
I see a password in mine.. how do I unlock this
Default password is 1212 to unlock and set your own password.
Its dont work for me why? Its still go 25 kmh
Mine is not working again
It's showing me error 21 since 2 weeks now
I've been pedaling it to and from work every day for am hour or more
Good video...Thnx for the tips
Great and informative video David, thanks. Regarding the "Walk Mode", how do I go about turning it off because I think I might have accidentally turned it on and now my bike just crawls at every settings.
No problem. Use code AMP20OFF for the Turtle Neck FX. I would love for you to try it out www.davidbrandnew.com/store/p/turtle-neck-stem-fx
Can you get a Manual for the computer settings
There should be one one the website
Good vid help out alot
anyone know what settings to change to make The Pedal assist not so sudden and gradual
@@aussierednecksinger28 thx mate
Now lets see you ride on those settings... -chris
I did max settings when I raced against the Amp Rides bike. I had to revert some back because my mom rides the friend bike. I’ll do a ride video again at max settings soon
Oh and thanks for that positive comment you left the other day 👊🏽
@@DavidBrandNew when the video is coming with the maximum speed settings on the Engwe? wanna see how fast it is on the road!
My engwe has same setup tanx
@@billwalsh7362 i just got an engwe
This is probably what makes friend bike more advanced. Plus it has a way bigger battery which is an 17.5h battery 😬. Idnk what is better for the cost.
Yes sir 👍🏿
👊🏽
Is 1200 too much for the 750 motor? Is it way more torque?
No they usually peak higher than 750w. More power up hills
How do you turn on light?
Just try the buttons there are only 5, its one of them ;)
how do i put in throttle mode
I think its allways active, if you just pedal it gives you pedal assist, but if you turn the trottle it will go without the need of pedaling.
if you come across the speedrid Amazon bike settings I would appreciate it no doubt for sure or even a reset button I am seriously need to fix that bike messed with the settings can't put it back to normal no way to get in touch with the company for the schematics
I ordered my first eBike, does changing the power output of the motor (giving it 1350 watts) make the hub motor run hot? I feel like its like changing the advance on my radio control electronic speed controller and that makes them run hotter. I'm used to electronics that are very similar to eBike motors and speed controllers but im by far no expert. I may not even change them but if it is essentually free power without harmful side effects, i would definitely want to do it. If i end up keeping it rather than selling it (just using it for commuting as it is much more useful right now than a vehicle) i might put another $1000 into it to make it a 1500 watt system. Yes, i already know the laws associated with the classes of ebike and the rules concerning bike trails and traffic use. After this short stint of using it for commuting, i wont need to use it where i have to worry about the laws. I might at that point buy a Specialized class 3 bike unless the bike ive got on delivery can be modded to fill that niche.
I can't get into the menu the same way
Do you have the same bike or different bike
@@DavidBrandNew different one but same controller and screen. It asks for an pincode when accessing settings.
Pin should be 1212
Whatever you had me do made it so I only go 13... I was doing 24 wtf
How come my max goes up to 99???
Was it set to A0 at first ?
@@OzaruPrince Hmmm sorry but what you mean A0?
@@perrygogas idk when I go into my LS settings in stead of a speed it says A0 and when I press minus button it goes down to 99kmph but even when set to 99 it still only goes 20 mph
@@OzaruPrince Same here my max speed is 35 kilometers/hour approx 20 miles.
I won der how we can cancel the limit as the motor is supposedly 750W and not 250W
Does the Friend bike battery work with your Lectric XP and vice versa?
No the friend battery is larger
Can you make a video on how to make it back to normal 🤣 plzz
Oh no lol
No 'i' button on my Hitway bk-12
Hello.... Ce serait beaucoup plus appréciable si tu arrivé à fixer sans bouger le display merci
Did turning it up to 50 actually make it faster?
Yes it did
I'm not allowed to have a twist grip, not even when it's deactivated, now I've deactivated it and put it in the back of my side pocket, because when I remove it from the controller, the display always shows Error 22 instead of my speed and I can't make many settings. Does anyone have any experience of how to bridge the situation where the controller thinks there is a throttle grip on it? I don't need a gas grip either, I have an e-scooter without pedalling
Having problems trying to make my electric bike faster it's from China Funhang it's called any idea or suggestions I've tried several things but no luck yet