Upon unboxing, I was immediately upset at how the rails were very noticeably bent. But I kept going, all tools needed to assemble were included ruclips.net/user/postUgkxqtX4Dxs6aecAZEuz6GY5-d81YecKCshn and I had it set up in about 30 minutes. Honestly I love this thing, make sure to read the measurements and measure your space so you know if it'll work for you. I bought this to put inside my closet, underneath where I hang my clothes and it is absolutely perfect! It is VERY sturdy and all drawers glide easily and mine are stuffed, and they are still flush when closed.
hello,, i´m thinking too much how built a chest of drawers for the closets of my boys, i´m not carpenter and your video encourage you to build mine, looks simple, no need to much tools, and my wife said "you're finally going to make them" (LOL) Thanks for your videos Greetings from Cancun Mexico
This is a great build. Thanks for sharing. I don't know why RUclips has changed things. But as soon as I saw your video pop up I was thinking... I haven't seen him in a while.
Great video paw paw...Pretty soon we see paw paw on hgtv he very popular..soon 100k subscribers and youtube multi millionaire :)...its so nice when a hobby can make you millions
Your videos are great, BUT I would LOVE to see you build this without all of the fancy equipment. I have a regular size table saw, a circular saw...no track, a jig saw and a few other pieces of standard equipment no cnc routers or anything else. Can you do a video for total newbies??😊
With that selection of tools you can build almost anything. I have a beginner series. I’ll also answer any questions that you may help to help you get started
Drawers are big. Hold a lot of clothes. Will the bottoms be strong enough and not sag? I was thinking a bigger dado and use 5/8 plywood for the bottom.
I use different ones depending on the project. For pen projects I use the Starbond CA glue which produces an excellent sealer and finish. Many of the projects I use schellac. For the cabinets and most of the furniture I use polyurethane.
Hi, i recenlty trying to make a dresser using a non structural 12mm thick plywood... But its a complete failure, because the plywood just warp and warp despite spraying water accrodingly to youtube advise and adding weight. After flattened, the moment you nailed it and glue it, it warp back again and its out of dimension and out of square. I have to scrap the half done project and need to redo it again. Question is does your plywood warp? Are you using a 15mm, 18mm thick plywood?
This is a paint grade and cabinet grade plywood that is sold at The Home Depot. It has the ability to be stained but it will show varying degree of grain.
Sir: I realize why you do not list your phone number, we would all be calling you day and night as you do such a great job. But I would like to ask you questions about The NewB CNC Kit for the X-Carve 1000. Is there an area I can go to to write to you about this item?
Upon unboxing, I was immediately upset at how the rails were very noticeably bent. But I kept going, all tools needed to assemble were included ruclips.net/user/postUgkxqtX4Dxs6aecAZEuz6GY5-d81YecKCshn and I had it set up in about 30 minutes. Honestly I love this thing, make sure to read the measurements and measure your space so you know if it'll work for you. I bought this to put inside my closet, underneath where I hang my clothes and it is absolutely perfect! It is VERY sturdy and all drawers glide easily and mine are stuffed, and they are still flush when closed.
Thank you so much. I appreciate you watching
hello,, i´m thinking too much how built a chest of drawers for the closets of my boys, i´m not carpenter and your video encourage you to build mine, looks simple, no need to much tools, and my wife said "you're finally going to make them" (LOL) Thanks for your videos Greetings from Cancun Mexico
You got this. You can do it. This is a simple build that does not required special tools. Thank you so much for watching my videos.
Great video, thanks for sharing!
You’re very welcome
Thanks for all your effort. I have learned so much from your videos.
You are very welcome. I am so glad that my videos have helped you. Thank you very much.
I love your work
Thank you very much!
Looking for Chest of Drawer ideas so thanks for sharing this.
You are so welcome! I'm glad that you found this channel.
Thanks for the video my boys will like the dressers I’m going too build for them this week
That's awesome! Have fun!
A lot of good tricks in here!
Yes, I try to include as many techniques as I can
This is a great build. Thanks for sharing. I don't know why RUclips has changed things. But as soon as I saw your video pop up I was thinking... I haven't seen him in a while.
Welcome back! Make sure you hit the notification bell. It is crazy what is happening in the RUclips world.
Loved the step by step
Thank you very much
Very well explained. You went slow and didn't speed through the project. I've learned a lot, thank you.
You are welcome!
I subscribed and shared this video as well... Best wishes from Indonesia
Thank you very much.
Got some good ideas thanks
My pleasure. Thank you very much
Great job, very informative.
Glad you enjoyed it! Thank you very much.
Great video paw paw...Pretty soon we see paw paw on hgtv he very popular..soon 100k subscribers and youtube multi millionaire :)...its so nice when a hobby can make you millions
You are very kind, thank you. However, I am so far from that possibility that it is not even a remote consideration.
Mucho Gracias por compartirlo saludos
Mucho Gracias
Good job on the channel. I truly enjoy it. I also see that you are from the boot as well. I’m on the other side around Lake Charles.
Thank you very much. I hope that you and the area are recovering from all the hurricanes last year
@@PawPawsWorkShop Yes sir. Everything is finally getting back to normal. Appreciate it.
Thank you
You're welcome. I’m glad it helped you
Your videos are great, BUT I would LOVE to see you build this without all of the fancy equipment. I have a regular size table saw, a circular saw...no track, a jig saw and a few other pieces of standard equipment no cnc routers or anything else. Can you do a video for total newbies??😊
With that selection of tools you can build almost anything. I have a beginner series. I’ll also answer any questions that you may help to help you get started
Cool stuff
Awesome! Glad you liked it. Thanks for watching
excellent ty
You're welcome!
I wish you were close here to Tennessee, I would love to come and spend some time in your shop learning from you sir!
Every time you visit my channel and see the project that I am doing, you are in my shop with me learning. Thank you very much for visiting
@@PawPawsWorkShop true sir thank you for doing them! God bless you and your family.
Like being his grasshopper... right?
Now I'm excited to build a dresser when the price of wood drops! Geesh!
Build the dresser now, I do not think the wood price is going to drop.
@@PawPawsWorkShop now you're making me sad, paw paw 😂
Sorry.
Awesome 💐🇮🇶
Thank you very much.
Game on bud
Ok, thanks. Love to see your finished project.
Just liked and subscribed paw paw
Awesome! Thank you very much.
SUSCRIBED, LIKED AND SHARED
I Love how you show and explain. How can one make a dado cut with no table saw?
You can use a router. I did a video showing how using two simple boards as a simple jig.
A New Life
Thanks
I prefer your projects with cnc
I have many more CNC projects coming very soon.
Is using glue on the end of the plywood a good idea? Using wood on timber end grain is bad idea since the end grain will just absorb the glue.
Plywood already is made use with a lot of glue. The end grain will not absorb as much as you think
Great to see it. I did it too. The plans from Woodglut helped me a lot :)
ok
@@PawPawsWorkShop All the best to you and all your family friend 🤙✌️
I would. Like. It to be longer
Hola buenos días, podrían traducir al español, gracias.
I look to see how to do that.
😯👍👍👍👌♥️
Thank you
Drawers are big. Hold a lot of clothes. Will the bottoms be strong enough and not sag? I was thinking a bigger dado and use 5/8 plywood for the bottom.
These drawers are stuffed with kids clothes and have not failed at all. Thanks for asking
Nice work. what sealer is your favorite. Regards from Maldives
I use different ones depending on the project. For pen projects I use the Starbond CA glue which produces an excellent sealer and finish. Many of the projects I use schellac. For the cabinets and most of the furniture I use polyurethane.
Hi, i recenlty trying to make a dresser using a non structural 12mm thick plywood... But its a complete failure, because the plywood just warp and warp despite spraying water accrodingly to youtube advise and adding weight. After flattened, the moment you nailed it and glue it, it warp back again and its out of dimension and out of square. I have to scrap the half done project and need to redo it again. Question is does your plywood warp? Are you using a 15mm, 18mm thick plywood?
My plywood is very stable and I have not experienced this problem at all
what is the material list for one of these dressers?
Thanks for sharing! I would like to know what plywood you use? I want to paint my cabinets. Thank you
This is a paint grade and cabinet grade plywood that is sold at The Home Depot. It has the ability to be stained but it will show varying degree of grain.
Thank you for replying. I have learned so much from your vlogs.
You're welcome
Quick question. How much space did you allow between each drawer?
Thank you sir.
Jim Paskell
1/8”
@@PawPawsWorkShop Thank you sir.
Sir: I realize why you do not list your phone number, we would all be calling you day and night as you do such a great job. But I would like to ask you questions about The NewB CNC Kit for the X-Carve 1000. Is there an area I can go to to write to you about this item?
Use my email address: pawpawsworkshop411@gmail.com.
you checked for squarness, what if it is not square?
On the long measurement you need to bump the corner toward the center until both measurements are the same
Yo yo yo
Thanks
comment.
lol, thank for the "comment"
Can someone make a supplies list?
This is not an entry level build. I can give you the basic measurements if that helps
Is there a materials list?
Sorry, I do not. It is made from .75" plywood.
You should have showed how to position the drawer glides.🙁 I have watched numerous videos and have yet seen how to do it
I have shown this numerous times in difficult videos. What is your specific question?
You don't explain about the slide and it's distance
Too much talk