Hi! Thanks a lot! The setup for the sound is very specific and I doubt if it can be 100% replicated. As far as the exhaust goes: 3 inch custom downpipe, 200 cpi cat (which I think is pretty worn out since I can't pass MOT with it), muffler deletes all the way to the back. So effectively the catalytic converter is the only source that should muffle sound, but given how loud it is I think you can basically call it a straight pipe :)
Thank you aswell ^^ sure, I'm not looking for an exact replica of it, but the tone and especially the pops and bangs are amazing. Do you think I could get the pops and bangs with ECU and a Cobra Non-Res Exhaust (&Downpipe of course)? I also have to get TÜV, sadly 😂
@@gabrielvanya8245 oh man, tuv sucks. Yeah I guess you'll get nice pops and bangs with that setup. Are you going to upgrade the catalyc converter as well?
@@PostTraumaticChessDisorder of course. 200 cpi is the goal, HJS & Miltek offer some well made ones. Can't go for less because of TÜV, but I think that'll satisfy me for now :p
Just tuned my AUQ GTI, its now running 240hp. Really happy with it, the pops are insane, just like an AK going off. What about your clutch ? Has there been any problems ?
@@itsav6349 Overall not that good for your engine and turbo, and it uses alot of fuel hehe. But if you keep it on a limit then i think its ok. Since I wrote the comment 4 months ago Iv installed a huge front mount intercooler, changed to bigger injectors and converted it to E85 - it's running 10x better. The changes i did helps the pops get bigger and louder.
@@BeyniLP It was some years ago now, but from what I remember: Stage 2 - Huge DO88 intercooler - Catless Downpipe - Open airfilter ( AEM ) Later on I went "stage 3" Following: Stage 3 - Bigger Injectors ( Siemens 630cc ) - K04 Turbo KKK - Ethanol E85 - Bigger pipes for the turbo to get better flow Estimated to have around 300hp with stage 3
Blijf toch elke keer terug komen op dit filmpje, sinds kort zelf eigenaar van een leon topsport maar zou gaaf zijn als de mijne ooit ook zo gaaf klinkt en popt 👌🏻
Thanks man! Ja dat heb je goed gezien, de oude einddemper was ook van PM en ik was zo tevreden over ze, dat ik er weer heen ben gegaan om de demper volledig te vervangen voor een rechte pijp haha
Dik filmpje. Ik ben zelf aan het twijfelen tussen dit model en de mk2 met dsg.. Een s3 met 1.8 20v kan ook nog, maar ik vraag me af of de quattro nou echt zo nodig is, ik zie dat je met je FWD opzich wel genoeg grip hebt. Ik ben zelf van plan om stage 2 te gaan max. Is een s3 quattro awd dan een must? Of zeg je, je kan net zo goed de cupra nemen want je hebt alleen spin in zn 1 bijvoorbeeld. Groetjes.
@@PostTraumaticChessDisorder how much kilometers have the engine mate? I ask because I want to go k04064 with stock engine and i have 190.000 kilometers with good maintenance (auq engine code)+1 stage 240hp the last 50.000 kilometres.
@@DimoS... that sounds exactly like mine. I had around 200K too when I installed my K04-064. Just make sure to find a good tuner so the torque wont kick in too hard. The K04-064 is capable of developing well over 500 nm
@@PostTraumaticChessDisorder Yeah I have good tuner here in grecce with world record pass,1000+ hp 20vt etc... I just know that the torque must be low for reliability ... do you think it will last many kilometers without being forged ??? Do you know other cases like ours?....(now how much kilometrs you have mate?)
@@DimoS... I drove this over 4 years with this setup, it never broke down on me. Such a reliable engine these 20VTs. I traded it this summer for a mk6 gti with DSG. Make sure to always properly warm up the turbo and let it cool down, but you probably knew that 😉
@@weisshac Thanks!, 321 hp, 419 nm torque. Engine is performing at its limit currently, but I've driving with this setup for 1.5 years now, the tune is great!
i plan to do this setup in my Jetta, but with a 1.8t swap since it’s VR6 right now. what bar of boost are you at? you’re welcome i’m kinda obsessed with this TFSi turbo
Het is een K04-064 Turbo, intercooler custom made, uitlaat ook custom, 386cc injectoren uit een BAM blok, BAM spruitstuk, Forge 004 of 006 blow off (net in welke stemming ik was), R8 red top bobines, custom made intake, N249 delete, SAI delete, en ik vergeet vast iets. Erg veel custom en zelf op maat gemaakt, heeft flink gescheeld in de kosten. Ik heb nog een 30 pagina tellende handleiding over hoe je deze upgrade kan doen. Deze auto heb ik al een paar jaar niet meer. Heb hem geruild op een mk6 gti, toen kwam er een mk7 gti performance en nu heb ik een Leon Cupra uit 2018 met ongeveer 400 pk.
Lekker hoor, ik hem net een 1.8 20vt aum opgehaald en ga die in een polo 6n2 swappen. Moet alleen nog eff de correcte setup zien te samenstellen. Zat zelf ook aan een k04 te denken.@@PostTraumaticChessDisorder
@@hardshocked726 de K04-064 komt van een TFSi blok af dus daar heb je pasplaat voor nodig en alle leidingen gaan de anders (originele turbo zit meer aan de bestuurderskant en de tfsi turbo's meer naar de passagierszijde)
"Objects in mirror are losing"
😂😂😂😂👌
Much love for making this video
My brother has a mk1 cupra R stage 2 and it properly fast
The first one is straight piped, right? And which exhaust system is built in that one? Sounds amazing, especially with the bubbling sound 💨
I hope this is not a game corruption-related video.
Hey, great video! I recently bought a Cupra R and I am looking for exhausts. This is the only one I really really like. Can you give me some specs?
Hi! Thanks a lot! The setup for the sound is very specific and I doubt if it can be 100% replicated. As far as the exhaust goes: 3 inch custom downpipe, 200 cpi cat (which I think is pretty worn out since I can't pass MOT with it), muffler deletes all the way to the back. So effectively the catalytic converter is the only source that should muffle sound, but given how loud it is I think you can basically call it a straight pipe :)
Thank you aswell ^^ sure, I'm not looking for an exact replica of it, but the tone and especially the pops and bangs are amazing. Do you think I could get the pops and bangs with ECU and a Cobra Non-Res Exhaust (&Downpipe of course)?
I also have to get TÜV, sadly 😂
@@gabrielvanya8245 oh man, tuv sucks. Yeah I guess you'll get nice pops and bangs with that setup. Are you going to upgrade the catalyc converter as well?
@@PostTraumaticChessDisorder of course. 200 cpi is the goal, HJS & Miltek offer some well made ones. Can't go for less because of TÜV, but I think that'll satisfy me for now :p
@@PostTraumaticChessDisorder but i i think u got pop and bang remap there?
"Cómo petardea!!!,alguien puede decirme que escape lleva?"
Gave auto man, zelf ook aan het kijken voor een topsport. Deze auto regelmatig gespot met meetings in Enschede
Thanks! Tof man! Goeie keuze. Ik ben 22 dec ook weer bij twente stadion. Wat rij jij zelf momenteel?
@@PostTraumaticChessDisorder dan zie ik je seat wss wel weer.. rij nu zelf een BMW E46 318ci coupe (hele mond vol)
@@tombosma7685 lachen. Zie je dan wel. Spreek me gerust aan als je me bij mijn auto ziet staan 👍
@@PostTraumaticChessDisorder zal ik doen, tot de 22e 👌🏻
@@PostTraumaticChessDisorder ondertussen de bmw verkocht. Nu heb ik een topsport met 215000km gelopen gevonden. Verstandige keuze? Orginele staat
Just tuned my AUQ GTI, its now running 240hp. Really happy with it, the pops are insane, just like an AK going off.
What about your clutch ? Has there been any problems ?
I heard ALS is bad for your engine, is there any other way for the pops that doesn't bad for your engine?
@@itsav6349 Overall not that good for your engine and turbo, and it uses alot of fuel hehe. But if you keep it on a limit then i think its ok.
Since I wrote the comment 4 months ago Iv installed a huge front mount intercooler, changed to bigger injectors and converted it to E85 - it's running 10x better.
The changes i did helps the pops get bigger and louder.
What did you upgrade for your AUQ to be 240hp?. Just got myself an ARY Leon
@@BeyniLP It was some years ago now, but from what I remember:
Stage 2
- Huge DO88 intercooler
- Catless Downpipe
- Open airfilter ( AEM )
Later on I went "stage 3"
Following:
Stage 3
- Bigger Injectors ( Siemens 630cc )
- K04 Turbo KKK
- Ethanol E85
- Bigger pipes for the turbo to get better flow
Estimated to have around 300hp with stage 3
@@TheCheaphead and you ran all that on stock pistons and rods? How long were you running it? and what was the mileage on it?
Blijf toch elke keer terug komen op dit filmpje, sinds kort zelf eigenaar van een leon topsport maar zou gaaf zijn als de mijne ooit ook zo gaaf klinkt en popt 👌🏻
Thanks man!
Is dit geen custom pm performence uitlaat?
Zo niet, welke is dan als ik vragen mag?
Echt n zieke auto btw🤤
Thanks man! Ja dat heb je goed gezien, de oude einddemper was ook van PM en ik was zo tevreden over ze, dat ik er weer heen ben gegaan om de demper volledig te vervangen voor een rechte pijp haha
Haha klinkt lekker hoor 👌, anti lagg of gewoon iets te rijk afgesteld?
Thanks man. Nee geen anti lag, gewoon iets rijker afgesteld dan de bedoeling was :)
Dik filmpje. Ik ben zelf aan het twijfelen tussen dit model en de mk2 met dsg.. Een s3 met 1.8 20v kan ook nog, maar ik vraag me af of de quattro nou echt zo nodig is, ik zie dat je met je FWD opzich wel genoeg grip hebt. Ik ben zelf van plan om stage 2 te gaan max. Is een s3 quattro awd dan een must? Of zeg je, je kan net zo goed de cupra nemen want je hebt alleen spin in zn 1 bijvoorbeeld. Groetjes.
Hey man. Met stage op een 20VT zal je rond 250 pk uit gaan komen en dat is heel goed te controleren. Awd is natuurlijk mooi maar is geen must hoor.
Thanks by the way
@@PostTraumaticChessDisorder dankjewel voor je feedback, weer een stap dichterbij een potentiële aanschaf! Thanks.
Heb je veel last van wheelspin in zijn 1/2 en zo niet wat heb je er aan gedaan om dat te voorkomen.
Hey what brand k04 turbo is it? Maxspeedingrods?
It's a K04-064. The engine is completely stock.
@@PostTraumaticChessDisorder how much kilometers have the engine mate? I ask because I want to go k04064 with stock engine and i have 190.000 kilometers with good maintenance (auq engine code)+1 stage 240hp the last 50.000 kilometres.
@@DimoS... that sounds exactly like mine. I had around 200K too when I installed my K04-064. Just make sure to find a good tuner so the torque wont kick in too hard. The K04-064 is capable of developing well over 500 nm
@@PostTraumaticChessDisorder Yeah I have good tuner here in grecce with world record pass,1000+ hp 20vt etc... I just know that the torque must be low for reliability ... do you think it will last many kilometers without being forged ??? Do you know other cases like ours?....(now how much kilometrs you have mate?)
@@DimoS... I drove this over 4 years with this setup, it never broke down on me. Such a reliable engine these 20VTs. I traded it this summer for a mk6 gti with DSG. Make sure to always properly warm up the turbo and let it cool down, but you probably knew that 😉
stock engine with K04-064 TFSi turbo?
Yes
340-360tq numbers i would assume, and nice. easiest OEM turbo get to 300whp
one more thing what size injectors, and is this a 2.5” or 3” exhaust?
@@weisshac Thanks!, 321 hp, 419 nm torque. Engine is performing at its limit currently, but I've driving with this setup for 1.5 years now, the tune is great!
i plan to do this setup in my Jetta, but with a 1.8t swap since it’s VR6 right now. what bar of boost are you at? you’re welcome i’m kinda obsessed with this TFSi turbo
Waar is deze auto afgesteld ?
Bij JD in Lochem 👌
@@PostTraumaticChessDisorder loopt lekker zeg!! Echt een dik geluid zit erin
Wat is je setup?
Het is een K04-064 Turbo, intercooler custom made, uitlaat ook custom, 386cc injectoren uit een BAM blok, BAM spruitstuk, Forge 004 of 006 blow off (net in welke stemming ik was), R8 red top bobines, custom made intake, N249 delete, SAI delete, en ik vergeet vast iets. Erg veel custom en zelf op maat gemaakt, heeft flink gescheeld in de kosten. Ik heb nog een 30 pagina tellende handleiding over hoe je deze upgrade kan doen.
Deze auto heb ik al een paar jaar niet meer. Heb hem geruild op een mk6 gti, toen kwam er een mk7 gti performance en nu heb ik een Leon Cupra uit 2018 met ongeveer 400 pk.
Lekker hoor, ik hem net een 1.8 20vt aum opgehaald en ga die in een polo 6n2 swappen. Moet alleen nog eff de correcte setup zien te samenstellen. Zat zelf ook aan een k04 te denken.@@PostTraumaticChessDisorder
@@hardshocked726 de K04-064 komt van een TFSi blok af dus daar heb je pasplaat voor nodig en alle leidingen gaan de anders (originele turbo zit meer aan de bestuurderskant en de tfsi turbo's meer naar de passagierszijde)
@@PostTraumaticChessDisorder de K04-TTE280 past er wel zo op, is voor zon lichte auto meer dan genoeg 😅
ik heb ook een 20vt turbo hoe krijg ik dit geluid? is het gewoon straight pipe?
Ja het is een open pijp. De knallen komen door het hogere vermogen
okee thanks, ik heb nu ook stage 2 240pk en iets rijker afgesteld dus als ik hem nu straight pipe zou ik dit ook kunnen krijgen?
@@FluxegamingHD ligt eraan. Hoor je al ploffen?
@@PostTraumaticChessDisorder jaa soms ploft hij zachtjes als ik een beetje met het gas speel
@@FluxegamingHD dan ga je hem met een straight pipe goed horen!
Wat voor uitlaat zit erop?
@@PostTraumaticChessDisorder hahaha. Jaa ik wil er bij mijn eigen leon ook een andere pijp op