Fantic GT Super Six Rebuild Time-Lapse
HTML-код
- Опубликовано: 27 авг 2024
- A time-lapse video showing the rebuilding of my Fantic GT Super Six from a bare frame.
Although a very tidy bike, there were various things that needed sorting; replacing the terrible 'spaghetti' wiring for the brake lights and indicators, fit a new front brake disc and caliper, fit the correct size piston, fit the correct clutch parts, rebuild the carburettor, fit a new air pipe and air filter, fit new fork seals and dust covers, fit new rear suspension units, fit new headstock bearings, fit a UK spec rear light bracket and light, fit new clutch and throttle cables, plus much more!
It has been a bit of a journey with new parts coming from Italy, France and various parts of the UK but a totally worthwhile exercise.
Huge thanks to;
Xavier Chanetz - www.leminarell...
Bosisio Motori - www.bosisiomot...
Biker's Toolbox - www.bikerstool...
Norman Blakemore - www.njbshocks.c...
Dave Hardwick - www.davehardwic...
Neil Ross, Roy Johnson, Brent Fielder, Rob Skipsey, Geof Hole + Dominique Lock
Music - 'Emergency On Level 3' by Jeremy Korpas
Top job again!
Thank you!
Brilliant! Bloody hell your fast. Can you have a word with the laggard that’s re-building my Jodel engine! Great soundtrack.👍
Maybe you could forward the video to your engine chap?!
Hi , brilliant job , any chance you would know were I can get some cabelero 5occ clutch plates from ? Mike at york
Hi Mike, thanks for the kind words. Xavier at LeMinarelliste in France is probably your best bet. What year is your bike, is it 4 or 6 speed? www.leminarelliste.com/en/moteur-p6
@@fanticman thanks for the reply, it’s a four speed 1975
@@MH-ng3wp Unless it has been upgraded in the past you should have the 4 friction plates and 3 steel plates. You can probably find the relevant parts on eBay from Italy but Xavier will sort you out if you get in touch with him with some photos of your clutch. Alternatively, my contact details are in the about section on my channel www.youtube.com/@fanticman/about
Hi, I have a cylinder with the code 240.47.01.5100.0. Ist it the same as yours and where did you get the piston for it?
Although this bike has a TX240 frame, the complete engine, gearbox and exhaust are TX220. So, the cylinder is 220.13.6100 (9hp), piston is specific for this cylinder and is not compatible with the 240 cylinder. Your 240 cylinder is very similar to the Caballero TX190 cylinder, please ask LeMinarelliste in France or Bosisio in Italy, links to both are in the description of this video. Cheers Mark
This might be OK, but please ask Bosisio first - www.bosisiomotori.it/prodotto/19013006320/
That helped a lot, thank you!