Hello instead of my finger, how would I wire a small on/off switch instead ? I have a small on/off switch I want to turn my battery on/off for a diy portable speaker
If it’s still relevant you would put a pull down resistor 10K from the negative pin to the touch pin, then positive with the switch and a 1K resistor then it should work 😅
Hello, I'm planning to make a 3-way touch switch (on-off-on) for a LED strip installed in my car, in order to switch between power only when doors open/off/power all the time, what kind of touch switch would I need and where can I get one? Hope you can help :)
अगर जहाँ GATE point हैं वहा एक वायर लगाई जाये और वो वायर collapsing gate या window grill को कनेक्ट कर दी जाये तो किसीं के grill को छुते ही led जलेगी क्या?
Use IRFZ22N transistor, I will try to make it,also you should add a cooler for the transistor with cooling paste.I want to use it in combination with ambion light in ,my car.
hello. for me its not working. when I am connecting the wire to drain and source, without touching its getting on and when I am touching the gate its not responding
No, because mic induces only up to 1V AC. Maybe electret mic but again not sure if it worked. Gate needs at least 5V potential to be able to conduct. Human body has a lot more so it can activate the mosfet
its an N channel mosfet. when you give positive to the gate the led glows, when you give negative to the gate the led dims. so he changes the wire which he touches after each glowing and dimming. he doesn't shoot this in the camera. So he is faking there.
You are no engineer. This device is not a touch switch and will not function as such. The gate will charge or discharge unpredictably due to either static or capacitive coupled ac potential.
I used IRF530N and it worked perfectly. Thanks for the video.
Will it be default OFF when power is switched on? And will it not be even 1 millisecond ON before going to the default OFF state on power connection?
Hello instead of my finger, how would I wire a small on/off switch instead ? I have a small on/off switch I want to turn my battery on/off for a diy portable speaker
If it’s still relevant you would put a pull down resistor 10K from the negative pin to the touch pin, then positive with the switch and a 1K resistor then it should work 😅
Can I ground a momentary switch to that pin to make the on/off flip flop switching?
Saludos y la verdad es único tu proyecto .. sencillo y muy útil .. gracias x compartir me sirve de mucho en mí trabajo 👍 ya me suscribo
Amigo necesito conectar un interruptor tactil para un espejo
Me puedes ayudar ?
great video, thanks for making it. How many watts could you add to this with a 12V battery?
can i connect 12v siren instead of light bulb? and can it stay ON until i switch it off?
Yes
Hello, I'm planning to make a 3-way touch switch (on-off-on) for a LED strip installed in my car, in order to switch between power only when doors open/off/power all the time, what kind of touch switch would I need and where can I get one? Hope you can help :)
Maybe use a reed switch
work it also with a battery of 5.6 volts?
Great project
How it's parctily used in .or in which device
hello we have to touch the z44n to pass the current? small metal.
अगर जहाँ GATE point हैं वहा एक वायर लगाई जाये और वो वायर collapsing gate या window grill को कनेक्ट कर दी जाये तो किसीं के grill को छुते ही led जलेगी क्या?
Yes 100%
Bhai ye bike me laga sakte he kya jisse pata chal jaye koi chura ne aaya he bike
you can try
Super Duper Video
1:18 espaunea en bicho. ¿Error en la matrix?
No, this circuit is just a simple sample only. It does not work perfectly. It turns on all by itself after a few minutes.
Can I use 12v buzzer instead of led
Buen trabajo, felucitaciones
Is there a way to make this momentary? For instance, the light only comes on when you are touching the prong/switch.
Use transistors instead of mosfet
kindly mention the product descriptions
Se puede hacer Para un espejo con tir LED?como seria? Gracias
how to make same wiring with 220volt15 ampere refrigerator on off switch
Se puede usar con 5V ?
I tested, it doesn't work properly 🙁😐
can i do this circuit by using220v
Mosfet heat to nahi hoga
Quais os componentes e valores? Parabéns pelo vídeo.
HOW WORK WITH AC CURRENT IF USING FAN AND TUBE? PLEASE TELL ME SOON
Wire it with a relay
Use IRFZ22N transistor, I will try to make it,also you should add a cooler for the transistor with cooling paste.I want to use it in combination with ambion light in ,my car.
can this be used in gate for security purpose ?
This working but that mach time you keep your hand ✋ that much time only. on and your hand removed than it off
hello. for me its not working. when I am connecting the wire to drain and source, without touching its getting on and when I am touching the gate its not responding
@@MohammadShamsagejuha for you transistor is different your not same
Bhai Isko Bluetooth Speaker Mein Kaise Lagaye Ye Btao Is Topic Par Video Bana Do 🙏 Please Help
Hi, Can I replace the touch with the microphone?
No, because mic induces only up to 1V AC. Maybe electret mic but again not sure if it worked. Gate needs at least 5V potential to be able to conduct. Human body has a lot more so it can activate the mosfet
Maybe you could try logic level mosfet which can conduct at something above 1V
However, if we add the microphone signal amplifier it will work.
However, if we add the microphone signal amplifier it will work.
i need something like this but need to touch it from a distance of 2 or 3mm for my miror :)
Anyone here knows if we need a heat sink for the Mosfet? THANK YOU !!!
With a big load yes you need a heatsink but I recommend wiring it with relay so the MOSFET doesn't heat up so you don't need a heat sink
stand relay?
Thanks
Welcome
Easy and Helpful
Good work
Thanks
Yo en el Min 1:17 viendo como se te pasean las CUCARACHAS en tu casa
its an N channel mosfet. when you give positive to the gate the led glows, when you give negative to the gate the led dims. so he changes the wire which he touches after each glowing and dimming. he doesn't shoot this in the camera. So he is faking there.
Yes, there no latch circuit
It should turn of when untuoch the probe
1:18 who noticed something ? 😅😂😅
A bug suddenly appears, bottom right of the Power Supply, then crawls away. 😆
Cyprus Kill 👏👏👏😂
Bro Any IC Used
Mosfet
I use 3205 but not working plz help
3205 will not work
@@easytechzones plz alternative
Sir alternative tell me plz
Nice
Ic model ....??
Z44n mosfet
can you make 220vac. instead of 12vdc? thanks!
Yess with relay
@@nisohrima3792 plz give the link 😓😓
I love you so muchhhhh
Kindly upload a video showing how to make an ac chaser
can this work on 3.7v?
Z10 video.I think it's a great job. Well done
You are no engineer. This device is not a touch switch and will not function as such. The gate will charge or discharge unpredictably due to either static or capacitive coupled ac potential.
@@emery5581 sir u shall teach me something plz
@@emery5581 he is only giving gate pluse which is improper...... How shall I contact uu. Sir
Sir Ya 4.7v Me Kam Nahi Kr Raha Hay......
Is Ky Lya Koai Helpe Karoo
Kuch time baad on ho ja raha hai but bahot kam light se
কোথায় পাওয়া যাবে
konta?
doesnt work with tip122
today's world going to DC12 (very good)
Z48n ok?
😍👍
Sir I want time delay between the on and off timing
This is not sec alarm try other
Use 555 timer
Sar ye kyahe kaponens lagakar banay
جميل جدا
nice owow
Thanks
Any one tell me. Is it real or fake 🙄💁
20 seconds intro lol
My not working
Home led 220v yes & on
Противно смотреть на эти когти
Неужели ножниц нет
P channel??
N
IT has no sens.
فاكيو
Not single touch 2 point touch not best
İrfz44n google.com da çok çeşit var tam no atarsanız memnun olurum
Fake. Not shown is the other hand touching power or ground to turn the gate on or off.
It is impossible
Всем привет он у меня не робота
brum...
Setelah saya coba ternyata tidak berfungsi
N'importe quoi, ce montage n'a aucune stabilité
Fake h bhai
Mofset
Z44 n
Irfz 44n
মিথ্যা
His doing is fake
Fake
thumbs down and reported. no music and learn to use your big boy words
Fake video
Fake hai bhai
No fake
Fake
fake video