When you're soldering, you should try to heat up the metal before putting solder on it. When the solder sticks to the soldering iron, it does not come off as easily and can lead to it being harder.
You should get an ultrasonic cleaner. That’ll allow you to clean the contacts underneath the CPU without removing the shields. Also you should get some solder wick to help you remove the extra solder on the iPhone battery connector. When I soldered in a new dock connector for my iPod 2g I first desoldered the connector using hot air gun. After that I removed the extra solder with solder wick. Then I used plenty of solder to solder in the new port. Then I removed the extra with solder wick. But great video as always! Keep up the great work!
in the case of water damage, you can let the board dipped in isopropyl alcohol a couple of days, actually there is a little machine were you put the board submerged in alcohol and it will heat the alcohol and start shaking it so the rust and dirt can get off the components easily.
I don't know if you have this stuff in your country, but here we use neophaline. IPA is just to bad. I doesn't evaporate quick enough, leaves residue, condensation.... Talk to the lady from iPad Rehab, maybe she can help you with some problems
Great video as always! If you plan to continue board level repairs, I suggest you get a professional soldering station with a hot air gun and also a big box of flux! Also ultrasonic cleaner with a specially made cleaning liquid will work good for water damaged boards.
You can put the boards in a oven and bake them.. this works for repair shops.. and for cleaning... a special soap inside an Ultrasonic cleaner.. itll vibrate and get all the filth out of the board
You use to low temp , you need to use for shield removal 450c 500c different to each station, to remove components use 410c 100airflow quick 861dw to put back u need to use 380c with low air flow around 50 % of your station ADd flux heat for 2-3 minuts until chip sits on its OWN
Can you fix one of my iPhone 5 cause I for some reason took off the screen, the pins are still connected but, the screen doesn’t turn on and the light doesn’t turn on ether. Can you help me fix it?
I had a problem where my mom’s water damaged 5S wouldn’t work with original screens but after market ones worked just fine. Maybe try that with the iPhone 5 if you haven’t already.
@Bacon does sh!t ive never had an iphone in my life, only assdroid and winblows phone. I wrote that and am writing this on a xiaomi mi a1, my expereince with apple has been bullshit pretty much every time ive used one. I speicifically dont like android because it tracks your every fucking move, other than that its fine.
@@jm036 you know, a few months ago I would have thought someone like you was crazy. But now, it's starting to make a lot more sense. Do you think every major corporation is a threat?
Hi 🙂 my volume switch is not working 😔 Touch ID is not working too but in my country there is no apple store 😭 and my camera is broke too it got black and purple dots everywhere in pictures 😢 can you help me with that 😇
Buy a new screen. The alcohol has killed your screen. I wouldn't suggest people to put alcohol on their phone, only clean the logicboard after you have taken it out of your phones housing, and make sure you let it dry before you try.
Hi Hugh, I suggest getting an electric toothbrush for repairing water damaged electronics. Works much better! I bought DIY electronics from China to practise on my soldering skills. Always use flux, makes a lot of difference (& lifetime). Soldering is not that difficult, but hard to master it. Well done anyways and thanks for the video.
Hugh i have an iphone 7 plus and it got wet because the sim card tray wasn’t completely closed and now it turns on but turns off every 5 minutes or so i tried a battery replacement but didnt work any ideas anyone please help?
A tip, when you're using Isoporopanol alcohol, mix in 10% of normal water, the Alcohol will not disolve sugar hence why water in the mix is also needed etc :)
I nicknamed that iPhone 5 "MePhone5". In the last episode of Inanimate Insanity, MePhone5, a white and silver iPhone 5, fell in water and got severely water damaged.
Subtitles is Spanish, if you put subtitles in Spanish in your content, more people can understand your great and informative videos, thanks a lot, greetings from Argentina
Actually it´s not. If you open your phone right after you dropped it then yes it sure is. But if you open it after a day it might not be noticeable that there was any water inside of it but if you succeed in takin of the metal brackets, then you will see water. Quick answer If you open it right after you dropped it -> Yes, If you wait a little while -> No (Maybe)
In an iPhone 6S plus. You might find some logic boards on ebay, but you need to make sure the TouchID button is still with it. Also chances you get scammed with an iCloudlocked logicboard are immense.
At least you tried to fix it Hugh. It was a good first try
When you're soldering, you should try to heat up the metal before putting solder on it. When the solder sticks to the soldering iron, it does not come off as easily and can lead to it being harder.
You should get an ultrasonic cleaner. That’ll allow you to clean the contacts underneath the CPU without removing the shields.
Also you should get some solder wick to help you remove the extra solder on the iPhone battery connector. When I soldered in a new dock connector for my iPod 2g I first desoldered the connector using hot air gun. After that I removed the extra solder with solder wick. Then I used plenty of solder to solder in the new port. Then I removed the extra with solder wick.
But great video as always! Keep up the great work!
PLEASE HELP TO REACH 100 SUBS WITH NO VIDEOS PLS
100 Subscribers With No Videos? No
Carrot 🥕
@@mkkk1 no fuck off
You know a lot for a carrot like you
You should make more iPad repair videos but I love any of your vids!
Jackson agrreeeeddd d..d d d..D
Holvolox .
Me too
Isopropycal alcohol 😂
Loll
@Kevin Wei Wrong type of alcohol mate lmaoo.
I thought I was the only one laughing at that.
Works great for water damage
😐😐😐
I like the way that you still post your fails to show people you can’t always get it right
Did u try to see if the backlight was dead?
@ woahhhhh badass right here^
There’s a missing pin on there
You should clean the connector points with solder wick and then use the flux and set your soldering station to an appropriate temperature
Ive been waiting to see a video on this 5! Nice work dude :)
So is isopropical alcohol the same thing as isopropyl alcohol? Asking for a friend..
in the case of water damage, you can let the board dipped in isopropyl alcohol a couple of days, actually there is a little machine were you put the board submerged in alcohol and it will heat the alcohol and start shaking it so the rust and dirt can get off the components easily.
Love your videos btw.
Wow I’m impressed with you Hugh! The thumbnail was amazing! I was looking forward to this video! Awesome video Hugh! Keep up the good work!
Thanks dude!
I don't know if you have this stuff in your country, but here we use neophaline. IPA is just to bad. I doesn't evaporate quick enough, leaves residue, condensation.... Talk to the lady from iPad Rehab, maybe she can help you with some problems
First try is not the last try you keep doing this repairs one day you become perfect 👌😍😍👍👍
how many iPhone 4s’ do you have currently?
It’s amazing how u can repair phones like that
Great video as always! If you plan to continue board level repairs, I suggest you get a professional soldering station with a hot air gun and also a big box of flux! Also ultrasonic cleaner with a specially made cleaning liquid will work good for water damaged boards.
I find your repair videos so satisfying
You can put the boards in a oven and bake them.. this works for repair shops.. and for cleaning... a special soap inside an Ultrasonic cleaner.. itll vibrate and get all the filth out of the board
love your channels, watch all the vids! I'm a fan. keep being awesome.
Board repair always hard work especially water damaged phones..
Great job man
You use to low temp , you need to use for shield removal 450c 500c different to each station, to remove components use 410c 100airflow quick 861dw to put back u need to use 380c with low air flow around 50 % of your station ADd flux heat for 2-3 minuts until chip sits on its OWN
For soldering station u can buy a quick soldering iron , or t12 soldering station from aliexpress
This gives me Hopes for my dead Iphone 7 Plus !!Blessings my friend !!
Did you supervise the iPhone 5 In Apple Configurator 2 to bypass the passcode and iCloud activation lock
Huge do you have a repair shop? You have so many tools and knowledge ....
At least you tried. I respect that
Great Video,Hugh👍🏽
Can you fix one of my iPhone 5 cause I for some reason took off the screen, the pins are still connected but, the screen doesn’t turn on and the light doesn’t turn on ether. Can you help me fix it?
@frhfsg did u remove the battery connector if not that's y ur iphone is ruined
Backlight issue
Check backlight circuit
Can you Make A Video on Nexus 5X Board Dead Making into Back Run ???
Why do you never update the software on your devices?
I would recomend a chisel tip and use more flux. Also clean the pads wick and alcohol
3:00 Did you consider enabling VoiceOver for the time being until you can get the internal display working?
VoiceOver is very annoying (especially for those who are NOT blind)
Is there a way to repair the iphone 5 you showed first?
I had a problem where my mom’s water damaged 5S wouldn’t work with original screens but after market ones worked just fine. Maybe try that with the iPhone 5 if you haven’t already.
What is the music? 5:30
Awesome video man! Love these types of videos! :)
Thank you for this I got an iPhone 5s that was water damaged to work
man i could have done this on my old iphone 6s
you have an assdroid profile pic with goolag shirt
@Bacon does sh!t who lol
@Bacon does sh!t ive never had an iphone in my life, only assdroid and winblows phone. I wrote that and am writing this on a xiaomi mi a1, my expereince with apple has been bullshit pretty much every time ive used one. I speicifically dont like android because it tracks your every fucking move, other than that its fine.
@@jm036 you know, a few months ago I would have thought someone like you was crazy. But now, it's starting to make a lot more sense. Do you think every major corporation is a threat?
M1 hmm, did you say earlier that you hated android?
Just flash a custom rom
you should make vids about swapping the chip and your vids are amazing
Hey Jeffrey, what is the best/good website for buying a IPhone 6s LCD screen with good quality ?
Hi 🙂 my volume switch is not working 😔 Touch ID is not working too but in my country there is no apple store 😭 and my camera is broke too it got black and purple dots everywhere in pictures 😢 can you help me with that 😇
Go somewhere else to fix it like duhhh
Buğra Kara Did someone shine a laser into your camera?
TheLucario88725 / Bao Junior no I dropped that in sea
fifomicas I can but I don’t know how to enable Touch ID again
Is it possible to revive a iPod Touch 5 that went through the washing machine back in 2015
I have a iPhone 4 without a iCloud lock and all it does is it shows the apple logo, is thst a case of it not reading the battery?
A very good first attempt!
Also what i would do with the iPhone 4s I would get something small and put it on top of the battery connecter and for me it worked
My Samsung Galaxy S9+ got water damaged and it won't turned on do you reckon it'll be able to be fixed like the iPhone in this vid ‽
Sir,did you try it to turn it off and back on again?
Awesome video as always
question : what apps you used in mac to show inside iphone on this video?
Could you have screwed the battery’s cable into place to hold the connector in? Nice try though, keep up the great videos Hugh 😄
What is the name and model of the heatgun you are using ?
Thanks
Amazing Video Hugh
Great vid dude
I have a 6 on 10.3.1 water damaged, I didn't manage to power it on (I didn't take off the shields as I don't have the proper tools)
Send me one of the bad 4s logic boards i have an icloud locked one that i could use to fix it
Hugh can you help my iPhone 6s won’t turn on ? What can I do?
Hugh Jeffreys I have a question I sprayed my iphone 4 with rubbing alcohol and now theirs liquid between the screen and the lcd and suggestion?
Buy a new screen. The alcohol has killed your screen.
I wouldn't suggest people to put alcohol on their phone, only clean the logicboard after you have taken it out of your phones housing, and make sure you let it dry before you try.
Actually it mostly should evaporate
It’s pronounced iso-pro-pal ;)
or isopropanol hehe
Sofiane Abdessemed 0
Hi Hugh,
I suggest getting an electric toothbrush for repairing water damaged electronics. Works much better! I bought DIY electronics from China to practise on my soldering skills. Always use flux, makes a lot of difference (& lifetime). Soldering is not that difficult, but hard to master it.
Well done anyways and thanks for the video.
From the looks of it you need to use more flux and raise the temp of the soldering iron
Hugh i have an iphone 7 plus and it got wet because the sim card tray wasn’t completely closed and now it turns on but turns off every 5 minutes or so i tried a battery replacement but didnt work any ideas anyone please help?
Where did you get that battery tester?
Name of the software you juse befor QuickTime player 🙏
Great first try! I do this stuff daily. I have a repair shop in Vancouver Canada called ring ring repair. You should look into micro soildering
A tip, when you're using Isoporopanol alcohol, mix in 10% of normal water, the Alcohol will not disolve sugar hence why water in the mix is also needed etc :)
Stockholms Oskar mmmm no not a good tip at all if you are doing this good luck.....
176cgna been doing it like that for years.
Normal isopropanol doesnt not disolve dried up sugar/coffee and other stuff
Stockholms Oskar that's what brandson cleaner is for
176cgna Because those are very cheap yeah...
Stockholms Oskar I use a generic ultrasonic cleaner and the cleaner I have a 95% success rate fixing water damaged phones
Hi, do you accept phones from the users for repairs?
I nicknamed that iPhone 5 "MePhone5". In the last episode of Inanimate Insanity, MePhone5, a white and silver iPhone 5, fell in water and got severely water damaged.
Subtitles is Spanish, if you put subtitles in Spanish in your content, more people can understand your great and informative videos, thanks a lot, greetings from Argentina
Could you give me the links for the products you use?
Like the screw drivers
Do you repair android phones? Like Samsung or Huawei etc...
How do you remove iCloud? :p
Where do you buy your parts?
How do you repair an iPhone X with a water damage that doesn’t turn on?
How do you wipe the passcode like you mentioned?
Saw your story on insta
Great video
O Yaa first soder repair video 😃
What program did you use to mirror the iPhone ?
QuickTime Player
Can you help me restore my dead water damaged iPhone 7? like guide me through it?
I tried to solder the same battery slot, but melted it and just gave up, I never tried a heat station gun
What quick time player do I download?
Such a talent
Great video finnaky fixed my iPhone 6s
6yrs into a tech repair channel and he's only just learned about IPA?
Answer me pls can a 1 year old iPhone 5c water damaged be repaired btw like your videos xd
Hey Hugh I have a really water damaged iPhone SE 64GB gold I can not do it if you can do it I will need it back tho
My I phone 5s is also dead they said board prb what I have to do plz tell me sir
Wait I know this is probably a stupid question but when a phone is water damaged when you open it is it flooded with water????
Actually it´s not. If you open your phone right after you dropped it then yes it sure is. But if you open it after a day it might not be noticeable that there was any water inside of it but if you succeed in takin of the metal brackets, then you will see water. Quick answer If you open it right after you dropped it -> Yes,
If you wait a little while -> No (Maybe)
Would you ever sell any of these phones?
A battery connector can be taken from a donor board!
You deserve more subs
Does that QuickTime thing work in windows 10?
Nope it's only for MacOS
Evan Klemick shame
Do you know where to get a iPhone 6splus logic board?
In an iPhone 6S plus. You might find some logic boards on ebay, but you need to make sure the TouchID button is still with it.
Also chances you get scammed with an iCloudlocked logicboard are immense.
I should try clean the connector Again, and look clearly if you can see the pin, its weird it doesnt show
Anything, anyway i love ur vids!
Going to be a good one
Isopropyl Alcohol?
Be careful with the hot air station
Dun over heat CPU
Also check for battery terminal short
HEY BROTHER I HAVE AN IPHONE 7 WITH WATER DAMAGE NO POWER PLEASE TELL THE SOLUTION I HAVE ALL THE TOOLS FOR IPHONE
Why don’t you work on newer phone like the 8, 8 plus and X
what is the first program for iphone info?
Apple Configurator 2
Nice hugh
Wait u can clean the insides of an iphone with alcohol??!