The Hornet's Nest from the inside using the Wattsan CNC machine. How do they do it?!!

Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/AxesGarage and get a special starter pack 💥 Available only for the next 30 days
CNC machine Wattsan:
wattsan.com/products/cnc-rout...
I want to remind you that our projects are made for RUclips and solely thanks to your support. Thank you so much for the donations, thanks to them we can save our work. If you like what we do and you can support us, the details are in the description of the video. Every dollar will go toward consumables and workshop upkeep so you can see the new series faster. Thanks!!!
PayPal - [e-mail]
ETH и ERC-20(usdt, usdс, busd): 0x30A15Fe2C52a4994FE3550C43d8e0383332AF7f4
TRX и TRC20(usdt, usdc): TS1fX27i6ecp8tGvnEsQs46WY31nr72Z86
This is our new show called The Cut. In this episode, we'll get a hornets' nest, fill it with epoxy, cut it into slices, and show it to you in great detail. Sit back and have a good time. Enjoy watching!
#wattsan

[@DashingAxe]

I want to remind you that our projects are made for RUclips and solely thanks to your support. Thank you so much for the donations, thanks to them we can save our work. If you like what we do and you can support us, the details are in the description of the video. Every dollar will go toward consumables and workshop upkeep so you can see the new series faster. Thanks!!!
PayPal - [e-mail]
ETH и ERC-20(usdt, usdс, busd): 0x30A15Fe2C52a4994FE3550C43d8e0383332AF7f4
TRX и TRC20(usdt, usdc): TS1fX27i6ecp8tGvnEsQs46WY31nr72Z86

[@justineseman3741]

The effort you guys put in just for us Americans to enjoy your product is respected immensely Thank you so much Dashing Axe!

[@66snoball]

For real!!!

[@axes_garage]

Thanks for the kind words! We appreciate it) and trying to do our best

[@axes_garage]

@@66snoball thanks for watching. Subscribe! We have a lot of crazy projects)

[@SamosYTfront]

Yh cause only Americans speak English right…

[@justineseman3741]

@@SamosYTfront Who hurt you to come into a comment section with literally the weakest bullshit? how about i give you something to bitch about, American English is O L D E R than British english.

[@rebernard82]

"say something in hornet.."
"knock knock..."
🤣
love it. cool outcome regardless of which direction it was cut

[@axes_garage]

Thank you! Glad you like it) what our project do you like most?

[@sbrahma7395]

Absolute one...

[@axes_garage]

Thanks for watching

[@otodusobliquus3836]

Not sure if this helps, but the vacuum chamber for removing the bubbles isn't done after the pour. You're supposed to remove the air bubbles after you mix but before you pour, leaving zero to minimal trapped bubbles. Pouring lightly and very slowly all over the object will also help with minimizing the bubbles and eliminating possible air pockets. Lastly, for an object like this nest, which will have plenty of trapped air inside constantly wanting to escape; I would also recommend sealing it first by painting a layer of the epoxy by hand all around it. This would remove the chance for ANY air to try to escape. Then after pouring around it, you could drill a hole in the top and fill the inside with epoxy only since you planned on cutting it.
Hope this helps a little!

[@axes_garage]

Thanks a lot for your interest!

[@harrylake9388]

This is so beautiful.

[@axes_garage]

Thanks for watching

[@harrylake9388]

So cool!

[@axes_garage]

Thanks! Have you seen our other projects?

[@DJWhitelow]

Thats cool & really interesting, look forward to seeing more👍

[@axes_garage]

Thanks for watching! Subscribe to our channel! We have a lot of crazy projects

[@JTBlair-nw6gb]

You guys are amazing!

[@axes_garage]

Thanks for watching

[@pierre-3253]

This is REALLY WELL DONE !! 👌

[@axes_garage]

Thanks! Keep on watching our channel we have a lot of crazy projects!)

[@mortenhenningsen940]

Cool project

[@axes_garage]

Thanks! Subscribe to our channel! We have a lot of crazy projects

[@mortenhenningsen940]

@@axes_garage i have done so for 5mts

[@tonywoodford8296]

That's brilliant fantastic thanks

[@axes_garage]

Thanks for watching

[@raddaks2039]

Dang that's really cool!

[@axes_garage]

Thanks for watching

[@Jameshhl]

really cool, but I wish you'd cut the nest side ways so we can see the honeycomb hexagon shapes of the nest.

[@axes_garage]

Thanks for watching

[@Destros2ndone]

this content idea is awesome
keep it up, this will blow up soon :D

[@axes_garage]

Thanks for watching. Subscribe! We have a lot of crazy projects

[@woodworker4063]

Awesome display stand for the incredible slices of the insect world🦟🦟🦟

[@axes_garage]

Thanks for watching! Subscribe to our channel! We have a lot of crazy projects

[@frankbob4043]

Hey, how is it possible that there was a camera already waiting for this dude to come in if it was his first time going into the attic? This looks sketchy man. Great vid by the way, hate hornets!

[@axes_garage]

Thanks for watching! Have you seen our other projects?

[@frankbob4043]

@@axes_garage Dude Yes! Your tables, Cyber van and the Vintage Bugatti are too addicting!

[@AccountLauri]

Do the same thing with an entire car. :D

[@axes_garage]

Great idea! Thanks for watching

[@piligrim4370]

100й👍🥳🇷🇺

[@southern_merican]

Whats the music at the end ? Me likey.....

[@DashingAxe]

Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/AxesGarage and get a special starter pack 💥 Available only for the next 30 days

[@sparta-jm6123]

Damn so hard to watch, because they are enjoying themselves, making cool shit sooo damn jealous.

[@gameboy398]

1