Siglent SDS1000X-E License Key Recovery and Activate WiFi AWG MSO 200MHz
HTML-код
- Опубликовано: 14 дек 2023
- Here we will recover the license keys for 200MHz and Wifi, AWG, and MSO fuctions. We do this using standard software from Microsoft and Siglent Official Firmwares. Nothing downloaded from any questionable websites. We also look at an alternative WiFi dongle and activate / test it, £5.48 and working.
Links
Siglent Official Firmware Downloads - www.siglenteu.com/service-and...
Microsoft Store for HexEd.it Download - apps.microsoft.com/detail/9PG...
Amazon TP-Link Wifi Adaptor - www.amazon.co.uk/TP-LINK-TL-W...
Notes
SCPI command: SCOPEID?
SCPI command: Sorry RUclips does not like the angle bracket :(
To activate a Frequency Mode use the SCPI command: MCBD (license key), thus a correct entry would be MCBD 885JZZ84V98JPZZQ
To activate a Feature use the SCPI command: LCISL (type),(key) where (type) is AWG, WIFI or MSO and (key) is the key, thus a correct entry would be LCISL WIFI,95EPWZZ9ZNZAP598
References
Thanks to the guys over at eevblog for all the insight, without them this video would not be possible.
www.eevblog.com/forum/testgea... 
Наука
Cheers, it worked perfect just as you laid it out. my SDS1204X-E is updated for MSO,WIFI, AWG.... 😀 thank you
I am really pleased this helped you. Thank you for taking the time to comment, it means a lot.
No worries having a go in morning
Cheers Mate, it worked perfect just as you laid it out. Or at least it did when I searched the memdump for SDS1000X-E rather than the SDS1104X-E I initially searched for! duh! ;-)
Thanks for the comment, it’s really appreciated and I’m glad it helped
Great video, thank you! 👍
Thank you for taking the time to comment, it’s really appreciated
I have seen a DIY version of the MSO and wondered how you would get the option key, now I know. I may still go with the OEM MSO as it appears to have better specs but Im tempted to try the cheap one and just see what it is like. Thank you
I have not seen that, do you have a link you can send me? I wouldn’t mind checking that out myself
You are great, thank you so much for making this video, I was too scared to do this and got lost on the eevblog didnt know how to start.
But after seeing your video with great and simple instructions, I will follow this tutorial :)
One question, instead of the SD card do you think we can use 64 gb USB?
Thanks, I am glad it helped you. You could try the 64gb USB but sometimes these things only recognise SD / USB flash simulating devices that are 32gb or less. It's a technical limitation. I cant remember honestly if this does or doesn't. But try, it will or it wont and no harm should come from trying.
At 20:55, after you press "Date/Time", you got the "NTP" selection. However, I don't have this "NTP" option, and the screen just have "Date/Time" and "Display off" selection. The middle 2 selections, "NTP" and "Time Zone", are misssing. Do you know how to add them? I am using a SDS1104X-E, with Software Version=6.1.37R10, Uboot-OS Version=8.1, FPGA Version=2021-11-08, Hardware Version=01-05. Thx !
JEU
Super, j'aimerai avec tout ce savoir faire !!
Je suis débutant, j'ai installé la dernière version du software : SDS1xx4X-E Firmware (4-Channel Models) -V6.1.37R10 (Release Date 03.30.23 )
mais je n'arrive pas à installer le dernier software : SDS1xx4X-E Operating System -V3 (Only For 4-Channel models) (Release Date 01.04.23 ) est ce normal ?
j'ai bien 4 fichiers sur ma clef mais aucun ne se termine par .ADS ou .CFG donc impossible de lancer la mise à jour
Si quelqu'un peut m'expliquer doucement ?...
Merci
If I recall correctly the new OS is only for certain Hardware versions that need particular support, most of us don’t need it. Looking at your menu, you don’t need it
Bonjour,
Merci pour votre retour, de toute façon c'est largement suffisant pour moi
Bonne journée ;)@@TheBionicbone
Voici les informations dans le menu état système :
SDS 1104X-E
Ver soft 6.1.37R10
Ver Uboot os 8.3
Ver FPGA 2021-11-08
Ver Hard 01-05
Type prod SDS1204X-E
Merci
is 8g card big enough
Yes I believe so, give it a try and if you can please let us know. I think it will be fine though, at one point in the video I think the size of the file is actually shown on the screen.
hi 8 gig dowloaded dump file but could not find any codes on hex do you have email contact
lee
Hey Lee, the file is only 245mb so your 8gb is more than enough. Check your 8gb is FAT32 formatted and empty, make sure you don’t rush the process, wait a good 3 mins for the file to write. After that just make sure you watch the video, don’t skip anything (even me rambling on as I’m known for throwing something important in randomly lol). I can’t really add email here, I’ll just get huge amounts of email, but I am setting up a discord.