You don't need to modify the spring valve if it is too hard to pump, it's just means you're head level from source to pump device doesn't meet the required elevation enough to push the spring valve. You simply need to increase the head level up to 5 meters or more as per manufacturer's recommended head level. If your head level is lower than the minimum required head level it means you bought an item online without thouroghly reading the specs. I think it's your fault, not the supplier.
Make few changes for better luck. Drive pipe are PVC type and not flexible. Drive pipe do not take turn and run straight to the pump. Drive pipe size always larger than output pipe. Output pipe can be flexible pipe. The input pipe diameter should match the valve diameter.
tagalogin na lang boss para mas madali maintindihan at maipaliwanag..di ka lang marunong boss dapat sarado yong outlet at saka dapat yong supply ng tubig deretso jan sa ram pump bakit parang may iba pang sanga yong supply..saka napakahina yong pressure.. manood ka sa youtube ang dami mo pde gayahin ang set up..i'm sure maayos ang gawa ng gilman dahil nakikita ko naman ang mga posting nila sa youtube.
yan ho...that is from Gilman wala akong ginawa but it seems that check valve or flopper disc is not working...kaya ko binuksan hindi gumana...but in their video it is working...my water source is 2 meter above and i have good pressure sa input...by the way that is their prototype why it is not working...
You don't need to modify the spring valve if it is too hard to pump, it's just means you're head level from source to pump device doesn't meet the required elevation enough to push the spring valve. You simply need to increase the head level up to 5 meters or more as per manufacturer's recommended head level. If your head level is lower than the minimum required head level it means you bought an item online without thouroghly reading the specs. I think it's your fault, not the supplier.
You must extend the hose from the source down so the pressure increase,low pressure is the cause
Nice one brod.. Keep it up & Long live THETANS..
thanks Brod...
Make few changes for better luck.
Drive pipe are PVC type and not flexible.
Drive pipe do not take turn and run straight to the pump.
Drive pipe size always larger than output pipe.
Output pipe can be flexible pipe.
The input pipe diameter should match the valve diameter.
Binisay a nalang pra masabtan
sigi Boss
Bisaya nalang or tagalog boss para di ka mahirapan
Binisay a nalang sir
👍👍👍🙏
Nag bisaya ka nlng sana,,,😅😅😅hirap na hirap mag salita😅😅😅
Gilman ram pump?
yes sir
@@unikfarmingtv6942 is it working this days
Pa englesh english ka pa , bisaya diay,
para sa akong amigo nga Arabo ug Indiano Sir
Tagalog nalang sir para maliwanag
tagalogin na lang boss para mas madali maintindihan at maipaliwanag..di ka lang marunong boss dapat sarado yong outlet at saka dapat yong supply ng tubig deretso jan sa ram pump bakit parang may iba pang sanga yong supply..saka napakahina yong pressure.. manood ka sa youtube ang dami mo pde gayahin ang set up..i'm sure maayos ang gawa ng gilman dahil nakikita ko naman ang mga posting nila sa youtube.
yan ho...that is from Gilman wala akong ginawa but it seems that check valve or flopper disc is not working...kaya ko binuksan hindi gumana...but in their video it is working...my water source is 2 meter above and i have good pressure sa input...by the way that is their prototype why it is not working...
vb haha
DILI MAN KA MAKA BALO MO INSTALL.PAGBINISAYA KAY BALI ANG IMO ENGLISH
bogo man
not working ang ulo mo