Analysis of Screw Jack In Ansys Workbench | Ansys Tutorial | Consilio Solution

Instagram : @consilio_solution www.instagram....
A jackscrew, or screw jack, is a type of jack that is operated by turning a leadscrew. It is commonly used to lift moderately heavy weights, such as vehicles; to raise and lower the horizontal stabilizers of aircraft; and as adjustable supports for heavy loads, such as the foundations of houses.
A screw jack consists of a heavy-duty vertical screw with a load table mounted on its top, which screws into a threaded hole in a stationary support frame with a wide base resting on the ground. A rotating collar on the head of the screw has holes into which the handle, a metal bar, fits. When the handle is turned clockwise, the screw moves further out of the base, lifting the load resting on the load table. In order to support large load forces, the screw usually has either square threads or buttress threads.
The screw jack consists of two simple machines in series; the long operating handle serves as a lever whose output force turns the screw. So the mechanical advantage is increased by a longer handle as well as a finer screw thread. However, most screw jacks have large amounts of friction which increase the input force necessary, so the actual mechanical advantage is often only 30% to 50% of this figure.
.
.
.
#ScrewJack #Ansysworkbench #Ansystutorials
Instagram : @consilio_solution www.instagram....

[@gire506]

Can you shre the cae file. It would be a great help.

[@Rocklee-vv]

Nice simulation sir.
I have to do a Structural Simulation of an object which will be underwater in the sea
I have to know whether the object will sustain the pressure inside the water (the depth is 30m to 100m) or will it get crushed.
I have tried using static structural analysis and defined hydrostatic pressure but the results are wrong.
What types of analysis and what all things to be defined to get the proper result sir
Any suggestions which would help me
Because I am a beginner to Ansys
With a very basic idea on Ansys

[@consiliosolution1930]

Hey Buddy,
Great to hear that you liked it, Thank you 🙂 Looking at your problem it seems you have used right method. Just recheck your given parameter. Do let me know @consilio_solution Instagram handle.

[@AyoubBrd-lz6he]

Sir i need how match ton ?