CR-10S Unboxing, Assembly and First Print
HTML-код
- Опубликовано: 4 окт 2024
- Pick up a CR-10S here for $459 with code GBCR10S: goo.gl/c7t21D
Does the CR-10s live up the Hype? I am un-boxing and assembling one today so lets find out! First impressions... yes, but lets dig in!
Support me via Pateron: ft3dp.com/patreon
Affiliate codes!
Amazon: ft3dp.com/amazon
Amazon.uk: amzn.to/2fRs371
Maker Geeks: ft3dp.com/maker...
Banggood: ft3dp.com/banggood
GearBest: ft3dp.com/gearbest
Ebay: ft3dp.com/ebay
Aliexpress: ft3dp.com/aliex...
Folgertech: ft3dp.com/folge...
You can get 15% off your first month's box by using this referral link.
ft3dp.com/makerbox and coupon code: FUGATECH
By using this link you can help out the channel.
Follow me on Social Media:
Facebook: ft3dp.com/facebook
Instagram: ft3dp.com/insta...
Twitter: ft3dp.com/twitter
Thanks for watching!
Music by: MDK
Song Title: Wubble Trouble
/ mdkofficial
/ mdkofficialyt
Buy the song here: www.mdkofficial...
Free Download: www.morgandavid...
You skipped through the assembly, that was the part I needed, there is two of the two of the T fixing blocks and one of them has something screwed onto it...
Daaaaaam! Seems you are touching the sky with new toys congrats means you have been putting a lot of effort your channel and reviews !
Is that a Pepsi Twist in the background?! YUMMY!
Another informative video - as usual - Shane. Thanks!
Seriously? You put up your ender 2 video the day after I ordered mine. And you did it again with the cr-10s.
The colored plastic in the v slots adds 10mm/s! 7:54
Did I hear you say you are going to change our the electronics in you CD-10? I would like to see the video on that. Mine prints great but always looking for better prints. I use the Elkins's profile.
WOW, you even talked about under voltage. That is great. I see so many videos where they say if you plug in 110vac, and the PS is set for 220, you will fry the PS. Thanks. Where do you live with 220 VAC?
Overseas :) Sorry I don't talk about it on RUclips.
nice , would be great if GB would also send me one for Reviews here in Germany
Finally, someone calls it a puddy knife. Good for you!
If it quacks like a duck and looks like a duck, it is a duck.... right?
Did I hear you say thhat you were printing straight onto the glass bed?
Yes.
"which will be eventually" :D
Careful, you're getting dangerously close to "project" time scales there :p
The profile you have for the CR 10 series is it for Cura or S3D and do you have the files up anywhere that anyone can download them to try out?
OK, so be honest, FT-5 or CR10. I have a FT5 with titan and volcano. Now debating if I should get another FT5 or CR10. Or maybe the new WANHAO...
cr-10s hands down.. :)
s0laris2009 I don't mind the unreasonable time it takes to build the FT5, but are the Cr10s prints better?
Nems271 the cr10s literally prints perfect. The ft5 will take a lot of time and tweaking and tears and blood to get it to that state without much advantage other than being able to enclose it easier.
You really can't compete with the CR-10(s) build time. 15 minutes and you are ready to print compared to the FT-5 which takes roughly 15 hours to build. FT-5 is more rigid though and you can enclose it for only a few bucks. Saying all that it is still really hard for me to compare them when I have been using the FT-5 for 18 months and the CR-10S for 3 weeks.
Yup, Im familiar with the tears and blood.
Painters tape on bed?
Dang, I watched 14 minutes of the video to watch you assemble the unit, then you went into fast forward. For that, you get the thumbs down from me. WTF?
I need your profile for the CR-10 for a good Friend here
the German Printing Nerd If it's like the Ender profile, check out Chris Elkins's S3D profile in the Cr10 Facebook group. I wonder what differences Shane has dialed in vs it.
Yep I used his as a starting point. I mainly change things like support settings and speed. (temps obviously) He is really good at dialing in these machines. Regardless of that, I plan on hosting my profiles on my Google Drive or website some time soon.
Fugatech 3D Printing I like posting them on githib. You can keep track of changes that way.
11:55 I like english.
No body tells you you really need to print from your computer
Gearbest? Friends? LOL! That's rich. Thanks for confirming my belief that it never fails to surprise me what can easily be influenced by simply giving out free stuff.
"Kickback", now that's an interesting use of that. Seriously. lol! I think Nexi Tech is who created the "little scoop" and it works for me.
For the insert haters: Just maybe the inserts help with keeping out dust and other stuff... Hmm, just maybe.
Hey, don't take my comments negatively. Thx.
How am I supposed to take them? Every printer I have received from them has been in perfect shape and fully functional. (well except for the stretched coupler on the CR-10 but it still prints great) They help me grow and learn about lots of new 3D printers. And in turn, I get to help so many others. Just ask around in all the FB groups I now help in. Only a fool would pass up on that kind of partnership.