Welcome back J.C, had my x9d for 2 months & only just now got companion to work correct thanks to yourself ! Keep the newbee advice coming to us on the tiny island over the pond .
Thanks for the info. I didn't post anything to you but I definitely incorrectly changed my "FrSky Taranis" driver to the "win" one. I was pulling my hair out and gave up yesterday. I'll change it back now. Thanks P.S. This is the first time I've got the first like and comment on a video 😎
Nocker01 about a year ago i did the same thing but this video wasnt up.After pulling my hair out i ended up resting my whole computer to fix it.your the lucky one!...lol
I tried all the steps on my Taranis Qx7 (yes I know this video is for a different transmitter, but similar OS) no luck. SD card and Taranis Tx was detected within windows10, but was not able to edit/add anything onto the SD card(Windows10 pop up error when clicking on the drive letter corresponding to the SD card path in file explorer). SOLUTION: I entered the SD into the transmitter, turn on tx normally > hold menu button > push page button > navigate to "SD-HC CARD" > hold menu button > format. this will format the SD card and erase anything in it. Restart tx plug it in the computer and I was able to edit the drive and paste in the SD card directory. Hope this helps someone so they don't have to go through what I went through. . . most wont have to since I suffer from chronic stupidity. Anyways great video awesome details.
Nice to see u back. I watch most of your video. Can you do tutorial for wiring , flashing firmware and etc for Openlog blackbox. Really need that :) Thanks in advance buddy
You may also have issues if you have a extra long USB cable and/or lots of electrical noise, grabbing a good quality and/or shorter USB cable may help.
I can access my memory card through the usb cable and on the tx itself.I have downloaded the siri soundpack onto the sd card and can confirm that it is on the sd card.and go through the sounds and play them on the system page.However,when I try to assign sounds in the special functions I get "No sounds on sd card" message on the tx screen.I have upgraded to firmware 2.0.20 any ideas on what's happening.?
Got everything to go but in tx companion when I click on 2.1.9 it won't show up in the ver column. Keeps showing 2.1.8 there and only loads 2.1.8 to the radio. I have tried to redownload 2.1.9 but still won't go into the version column before sending it to radio.
hey there Blue Falcon i have a case where i update massusb drivers and afterward's my pc is kidda re updating the drivers to the old one's? :3 could you please enlight me with telling em in what situation im in? :( also my Zadig window has a Red arrow to the updating which stands for "Driver installetion may result to unwanted result's"
I use them because I shortened my sticks. I use my thumbs instead of pinching. I'm not sure what they are called but they came off a hd camera mount like on this. www.amazon.com/YKS-Carbon-Fiber-Quadcopter-Frame/dp/B00WE9EGAA/ref=sr_1_1?ie=UTF8&qid=1487058600&sr=8-1&keywords=zmr+250 You can buy them separately I'm just not sure what they are called.
Hi there, I have just saved a new model file from an X9R TX to my PC. It has saved successfully to my PC Taranis model files. I have then saved the new model file to a new SD card and have tried unsuccessfully to then save this to a 2nd X9R TX. When I try to restore model the X9R TX comes up with a message "No models on SD"....any idea what is occurring? Cheers Pete.
Why is this not working in Windows 11? I have an old discontinued Taranis X9D + with software 2.0.15 and USB is not recognized when plugged into my PC no matter what I do ?? PLEASE HELP !! TY
Hello I thank you for your kindness and courtesy, I do not understand English, so I translate with google, excuse my ignorance. Your video, that is, beautiful and satisfying. I tell you my problem: I folder E I can see it, but it is empty, and if I open open tx settings by clicking on a letter E there 'is. Thank you again.
Welcome back J.C, had my x9d for 2 months & only just now got companion to work correct thanks to yourself !
Keep the newbee advice coming to us on the tiny island over the pond .
Any time bud
You are a hero my friend!! I have spent ages trying to get this working. Works like a charm now. Many many thanks.
Thanks for the info. I didn't post anything to you but I definitely incorrectly changed my "FrSky Taranis" driver to the "win" one. I was pulling my hair out and gave up yesterday. I'll change it back now. Thanks
P.S. This is the first time I've got the first like and comment on a video 😎
Nocker01 about a year ago i did the same thing but this video wasnt up.After pulling my hair out i ended up resting my whole computer to fix it.your the lucky one!...lol
Thank you very much for a while I thought I have to buy a new TARANIS. Very grateful to you!
I tried all the steps on my Taranis Qx7 (yes I know this video is for a different transmitter, but similar OS) no luck. SD card and Taranis Tx was detected within windows10, but was not able to edit/add anything onto the SD card(Windows10 pop up error when clicking on the drive letter corresponding to the SD card path in file explorer).
SOLUTION: I entered the SD into the transmitter, turn on tx normally > hold menu button > push page button > navigate to "SD-HC CARD" > hold menu button > format.
this will format the SD card and erase anything in it. Restart tx plug it in the computer and I was able to edit the drive and paste in the SD card directory. Hope this helps someone so they don't have to go through what I went through. . . most wont have to since I suffer from chronic stupidity. Anyways great video awesome details.
Nice to see u back. I watch most of your video. Can you do tutorial for wiring , flashing firmware and etc for Openlog blackbox. Really need that :) Thanks in advance buddy
Thank man. And yep no problem I'll do some blackbox videos.
You may also have issues if you have a extra long USB cable and/or lots of electrical noise, grabbing a good quality and/or shorter USB cable may help.
I can access my memory card through the usb cable and on the tx itself.I have downloaded the siri soundpack onto the sd card and can confirm that it is on the sd card.and go through the sounds and play them on the system page.However,when I try to assign sounds in the special functions I get "No sounds on sd card" message on the tx screen.I have upgraded to firmware 2.0.20 any ideas on what's happening.?
Got everything to go but in tx companion when I click on 2.1.9 it won't show up in the ver column. Keeps showing 2.1.8 there and only loads 2.1.8 to the radio. I have tried to redownload 2.1.9 but still won't go into the version column before sending it to radio.
I have done everything but in my Taranis sdhc page there is nothing, and in the tools page there is a spectrum thing and that’s it how’s that?
hey there Blue Falcon i have a case where i update massusb drivers and afterward's my pc is kidda re updating the drivers to the old one's? :3 could you please enlight me with telling em in what situation im in? :(
also my Zadig window has a Red arrow to the updating which stands for "Driver installetion may result to unwanted result's"
Hey man I ran into some problems and now when i plug in via usb it shows no driver
Hey, Just wondering where you got your blue rubber stick protectors from? Thanks..
I use them because I shortened my sticks. I use my thumbs instead of pinching. I'm not sure what they are called but they came off a hd camera mount like on this. www.amazon.com/YKS-Carbon-Fiber-Quadcopter-Frame/dp/B00WE9EGAA/ref=sr_1_1?ie=UTF8&qid=1487058600&sr=8-1&keywords=zmr+250
You can buy them separately I'm just not sure what they are called.
Project Blue Falcon hey where can I get the "USB mass storage device?" I don't think it's on my computer at all.
Hey how to conection joystick.my computer awareness mass storage
Hi there, I have just saved a new model file from an X9R TX to my PC. It has saved successfully to my PC Taranis model files. I have then saved the new model file to a new SD card and have tried unsuccessfully to then save this to a 2nd X9R TX. When I try to restore model the X9R TX comes up with a message "No models on SD"....any idea what is occurring? Cheers Pete.
HI Pete I am not sure if you are aware but JC passed last year :( I would try to watch some JB videos to see about help..
Why is this not working in Windows 11? I have an old discontinued Taranis X9D + with software 2.0.15 and USB is not recognized when plugged into my PC no matter what I do ?? PLEASE HELP !! TY
He can't help now, he was the best but he died in a motorcycle accident years ago.
Thank You! Thank You! Thank You! :D
You are a hero man
thank you. this worked for me!
Thanks you solved my problem ;)
Solved my problems. Thanks
Fixed my problem thank you so much......
I still can’t get the sad card warning to go away.
what if my taranis doesn't show up on device manager but it does on zadig
try to use another usb cable.... i tried three-_- and now it works
Hello
I thank you for your kindness and courtesy, I do not understand English, so I translate with google, excuse my ignorance.
Your video, that is, beautiful and satisfying.
I tell you my problem: I folder E I can see it, but it is empty, and if I open open tx settings by clicking on a letter E there 'is.
Thank you again.
Didn't work. :( "unknown device" and zadic and devicemanager can't change the firmware! There is a yellow triangle...
Dziękuje Ci bardzo !!!
Hey man! thanks thanks thanks a lot!!
thanks a lot, from italy!
Love you bro. Problem solved :)
Still helping me...
thanks
thanks!
Cheers pal
Thanks Man!!!!!
thanks again
Merci !!