Toyota Sienna. Dome lights and doors controls stopped working. Integration Relay Replacement

This is fix for not working dome lights along with door controls. Integration Relay Replacement is responsible all along. It should work for Sienna 1998-2003.

[@enero3180]

Amazing, just had that same problem. Thanks for this video bro, after almost 3 months I finally fixed it

[@SergSpace]

I happy to hear that!

[@ricardogomez4593]

Good job, you have a lot of patients

[@SergSpace]

Thank you! When you trying to save hundreds bucks, patience will come along.

[@jimmyortiz9696]

Thank you for the video

[@SergSpace]

You are welcome! I hope that it helped.

[@cast9609]

You're a life saver. Thank you for the detailed video. Helped me resolved my issue..

[@SergSpace]

My pleasure!

[@courtneyacoleman]

THANK YOU! I just bought a 2001 Toyota Sienna with this problem.

[@SergSpace]

You are welcome! I hope It will help. Although, it's another 60 bucks for relay if you lucky to buy from e-bay. My Sienna reached 241K. What's mileage on yours?

[@tonylagunas2]

Thank you this video it was a great walkthrough to replacing the integration relay. Will be trying it on my own with your video as my guide.

[@SergSpace]

Thank you! Let me know how did it go ))

[@tonylagunas2]

@@SergSpace The relay did the trick was not too hard at all with this video.

[@SergSpace]

@@tonylagunas2 I'm glad that it helped

[@user-es6ew5ep3v]

Thank you for the video. Very helpful.

[@SergSpace]

My pleasure. I'm glad if it worked for you.

[@eliasvillatoro6224]

Thank you so much

[@SergSpace]

I'm glad if it helped.

[@jeancadet5862]

nice🎉

[@smalltymmedia]

Thanks, exact issue that I have😊

[@SergSpace]

Let me know how did it go. 🙂

[@santiagoibarraryan5666]

Great video! Could point me in the right direction? I have a Sienna 1998 en it has the receiver unit to use it with a key fob. How can I use an aftermarket key fob with my Sienna 1998? Thank you

[@SergSpace]

I didn't try that. But I used after market fob for 2001 Honda CRV. These things are supposed to be compatible with Car receiver first , then you need to program it (pair with car receiver). The instruction should come with fob. If not, check the same model on Amazon for instruction. If there is no instruction in product description, check reviews. Usually somebody would leave steps for programing (pairing with car). It's a simple process involving several clicks on fob buttons and turning ignition key. In my case I went through steps 3 times before got it to work. The steps are needed to be no more than 5 sec apart. If you miss this window, have to start over. You may try RemotesRemotes.com web site for programming instructions also.

[@leroyusa935]

I purchased this integration module and everything worked okay again with the exception of my key fob remote. I tried reprogramming my key fob looking at other RUclips videos but still haven't had any luck. At least the dome lights work and all the door switches are working again. I can still get the key to open and close the doors and only the remote isn't working. It isn't a hassle like before when nothing worked at all.
Any suggestions?

[@SergSpace]

First Suggestion: You may accidentally disconnect Toyota Sienna receiver door control module or it just went off and you need a replacement.
Second: Did you buy correct Relay for your car? I described it in my video that there is 2 different relays. 3. The relay you bought could defective also. You may return if it's possible get another one. No fob re-programming was required in my case. Last suggestion: If you can open all doors from inside using door control panel, then it's your fob problem. Maybe old battery or oxidized contacts or battery fob stopped working for another reason. Amazon sells "2 Key Fob Remote Replacement Fits for Toyota Sienna 1999 2000 2001 2002 2003" with free returns. Try that. There's of course possibility that one of connector pins on relay or wire is pushed down or dirty or broken, but it's less likely.

[@Swenser]

Need to do this on my camry 2005. Bad solder joints to be resoldered.

[@SergSpace]

Did you mean re-flowing with heat gun?
Let me know how did it go.

[@Swenser]

@@SergSpace in a few days I will try. Also My dash clock was dim and reflowing that worked. Solder joints looked good on clock but thought I'd reflow everything anyway and it worked for that problem. So suspect bad solder on circuit board or dirty contacts on a relay. I'll get back to you.