I thought I was buying one huge project morbark 2400xl. But I was very mistaken. Will it start?
HTML-код
- Опубликовано: 1 июл 2024
- Set it done I’m right at 5000 into it. The 4bt is worth around 3k so doing very good. Now time to find the tracks/undercarriage.
Someone needs to show the man how to pour oil😂
Gotta keep you all laughing. 🤷♂️😂
that gauge with the hours on it looks brand new, i think the previous owner recently replaced it. so it's probably 11 hours since the guage was put in. maybe they squared the rim off to keep someone from stealing it.
So I thought the same but if you look at the back of gauge still has the factory overspray on it
That gauge f**led. The rev counter is stuck on 100
@@peterwiremuormsby9383 turn the power on went to 0 🤷♂️ who knows engine is out anyways now
That’s a 1000 plus hour for sure judging by the feed tray wearing. Hour meter easily could have been disconnected for whatever reason. Or new one swapped from another machine or who knows. And knowing the municipalities like to run them all day even if they aren’t chipping much I wouldn’t be surprised if it was closer to 2k hours
Well there’s no way to prove it in my opinion it’s under a 100 hour machine but that’s just me. But who knows no one will ever know. I definitely can say definitely is low hour there’s not one crack on the machine. What is like a holy grail for morbark chippers.
@@EbenT457 I have 700 hours on mine (same machine) and have less wear and less paint scratched off from feeding tray. But as long as it runs it’s all good.
great Work!
Thank you 🙏
What an absolute score, that machine was either sat for emergency clean ups or was a demonstration machine. But it certainly looks like it sat most of its life doing nothing.
Yea I wanna do some more investigation and figure out where it was used.
000😊😊😊😊
I just wonder where you can get hexagonal tires!
😂
nice score
Thank you
Why not simply tune, lube, change fluids and operate it as it is?
Well the engine needs to be updated to meet California emissions and I want to build a tracked chipper. Needed one for years
Can anyone donate him an ordinary funnel?
😂 don’t worry I went and bought more after that day.
What a score, you did not explain why you are going to do a re power on this machine. you obviously have your reason for doing it but why do it when it runs perfectly good as it is?
If you get a chance watch my video before this one the deutz power unit. But long story short I’m in California and they have very strict emission laws. The new ish engine meets all the requirements.
@@EbenT457In what equipment can you use the Cummins in or do you have to sell it to someone in another state?
@@Frank-Thoresen I can use it in a lot of projects you can still do engine swaps on cars and trucks etc. I thought about a 4bt scout build 😎. California is definitely making it hard thou to be free and do what you want!
Take the radiator & get it repaired.
Engine is already pulled check the most recent video
might be an idea to learn how to pour the oil without the splashing and gurgling, but great score on the chipper
😂 makes for good content yea I normally pop a hole in top of lid but I wanna use the containers for used oil
Nah, pour with the spout on top. It’s a game-changer.
@@localcrew I’ll have to try that! Thanks
Why ain't you gonna use that engine and what engine are you gonna put in it
California doesn’t allow these tier 1 engine anymore on state work sadly . So will be swapping it to a tier 4 deutz engine. I have a video of buying that engine.
@ 07:28 Hummingbird!
Millions of them around my property
How about putting a radiator and key switch on it and sell it for a few thousand dollars? Then buy a scrap chipper core for $500 and pocket the rest.
I contemplated about that but it’s exactly what I want in size and it being practically new saves me time later on.
Looks like you had a right result.
But jeez i was cringing watching you pour the hydraulic oil upside down so it was gluggljng all over the place instead of nice & smooth.
Yea wasn’t my best work but I got it done 😂