For those who are having trouble inserting the legs: Note that the three small pins that go in the socket are not perfectly aligned: The one in the middle is slightly more bent. When you insert the part, try to apply some pressure against the socket wall until the middle pin is aligned to the other two. At this moment you will be able to push the leg down as shown in the video.
After struggling with the legs for about 20 mins, I simply inserted the legs by applying little pressure on both pins using my thumbs and then assembled the 2nd shelf and applied pressure from the top using my palm. That did the trick.
Thanks to this video I was able to put it together, I did three of them. The first one was hard with the legs I had it upside down. After the video I did super fast. Thank you ❤️
At last i have put it together. 🎆🎆Thankyou for the video it showed me that it was possible. I did use a wooden mallet to tap parts in to final fitting. I did find it physically hard to push bits into place .
I had trouble making the legs fit in flush without injuring myself so what I did was connect everything as best I can and at the very end took a hammer with a rubber tip and hammered each corner in from the top. That did the trick.
Ho montato da sola scrivanie,armadi,pensili da cucina e cassettiere. Installo mensole e qualsiasi lavoro in casa faccio da sola e non sono in grado di montare uno stupido carrello ad incastro 🤣🤣🤣
hello could you please tell me the outer width of this product , the site says its 18 cms, the space i want to put is 17.8 cm :D do you think it can fit ? Thanks alot
For those who are having trouble inserting the legs: Note that the three small pins that go in the socket are not perfectly aligned: The one in the middle is slightly more bent. When you insert the part, try to apply some pressure against the socket wall until the middle pin is aligned to the other two. At this moment you will be able to push the leg down as shown in the video.
Спасибо огромное.
I almost broke my ribs trying to assemble the legs LMFAOOOO
Use rubber mallet to easily insert the legs
Its so hard to put the legs 😭
SO HARD!!! I’m a 58 year old woman trying to put this together by myself, and the damn legs won’t click in. Sheesh!!!!
Thanks to this video i have at least got the first leg to set in. When my blood pressure settles ill have a go at the rest!!😁
My faith was not enough in this assembly project, but with the help of the video I succeeded.
Thank you!
After struggling with the legs for about 20 mins, I simply inserted the legs by applying little pressure on both pins using my thumbs and then assembled the 2nd shelf and applied pressure from the top using my palm. That did the trick.
Thanks to this video I was able to put it together, I did three of them. The first one was hard with the legs I had it upside down. After the video I did super fast. Thank you ❤️
Thanks so much, this was driving me crazy!
Make sure you get the wheel holders right way round otherwise the air will be as blue as mine was!!
At last i have put it together. 🎆🎆Thankyou for the video it showed me that it was possible. I did use a wooden mallet to tap parts in to final fitting. I did find it physically hard to push bits into place .
I had trouble making the legs fit in flush without injuring myself so what I did was connect everything as best I can and at the very end took a hammer with a rubber tip and hammered each corner in from the top. That did the trick.
Thank you. This video and the comments were helpful.
Glad it was helpful!
Thank you for this video 🙏
Glad it was helpful!
Very helpful Thank you.
Glad it was helpful!
Thank you. Simple
Ho montato da sola scrivanie,armadi,pensili da cucina e cassettiere. Installo mensole e qualsiasi lavoro in casa faccio da sola e non sono in grado di montare uno stupido carrello ad incastro 🤣🤣🤣
Thank you !
thx
3:28 how on earth did you get it to click in so easily? I noticed the other 3 legs were edited out… most likely for censorship purposes 😉
You need to align the bottom feet before inserting the leg, it is hard to insert when it is not align
Hi can you tell me the exact distance between each shelf? I would like to know if my bottles can fit
Thanks 😀 it's at the end of the video LOL
Hard to install. Not like the other veskens w/out the wheels.
Im trying to fix it now. Gosh its crazy. I was able to put only one leg. And I feel enough of it. 😰
Спасибо,очень помогло. Привет из России.
I have a suggestion, use oil. I used it and was easier.
Thank you.😀
Thank you 🥰
das Teil hat mich halb wahnsinnig gemacht .................................
hello could you please tell me the outer width of this product , the site says its 18 cms, the space i want to put is 17.8 cm :D do you think it can fit ? Thanks alot
The outer width is 17cm and inside width is 14cm.
@@xianece1 Thank yoo so much :) really helpful :)
@@xianece1 17,5🙈
Try to wiggle it while putting in the bottom legs
How is this video helpful at all??????
Can you make a helpful video tutorial?
It look so simple. But it wasn't. Trying to place the legs it took energy and there's still a little gap. 😮I left it that way. 🫤😏