Gas Cylinder Impact Explicit Dynamic Analysis Using ANSYS
HTML-код
- Опубликовано: 22 авг 2024
- Please subscribe to our channel by clicking below link: Grasp Engineering
/ @graspengineering9249
This video presents the corner impact analysis of gas cylinder. It highlights how to perform explicit dynamic analysis of filled gas cylinder, meshing for explicit analysis, half symmetry, loading & boundary condition. It also discuss static analysis & pre-stress explicit dynamic analysis results like stress, stain, energy conservation, etc. It also present another example of top down impact analysis of gas cylinder.
Other Similar Videos:
0. Practical Introduction and Basics of Finite Element Analysis
• Practical Introduction...
00.Bridge Modeling & Static Structural Analysis Using ANSYS, Part 1
• Bridge Modeling & Stat...
1. Introduction and FE Analysis of Swing Check Valve using ANSYS, Part-1
• Introduction and FE An...
2. Types of Finite Element Analysis
• Types of Finite Elemen...
3. Free CAD Model for FEA Practices
• Top 5 Websites for FRE...
4. Harmonic Analysis of Base Frame using ANSYS APDL
• Modal & Harmonic Analy...
5. Modal Analysis of Base Frame Using ANSYS APDL (Classic)
www.youtube.co...
6. Seismic Analysis (Single Point Response Spectrum analysis) of Vertical Frame Structure, Part-2
www.youtube.co...
7. Response Spectrum (Seismic) Analysis Basics, Part-1
• Response Spectrum (Sei...
8. Nozzle Shell Junction FEA Analysis USING ANSYS
• Nozzle Shell Junction ...
9. Types of loads in structural analysis Using ANSYS
• Types of loads in FEA ...
10. Structural FEA Analysis of Topside Module using ASNYS Workbench
• Structural Analysis of...
11. Buckling Analysis of Pipe using ASNYS
www.youtube.co...
12. Submodeling Analysis using ASNYS Workbench
www.youtube.co...
13. Midsurface, Surface and weld creation using ANSYS Design Modular for Base Frame
• Midsurface, Surface an...
14. Vertical Pressure Vessel Modeling Using ANSYS Design Modular
• Vertical Pressure Vess...
15. 1D beam topside module Structure Modeling using ANSYS workbench Design Modular
• 1D beam topside module...
16. FEA Static Analysis of Pressurized Stop valve using ANSYS Workbench
• ANSYS Tutorials. FEA S...
17. Bolted Flange Gasket FEA Analysis Usign ANSYS Workbench
• Bolted Flange Gasket F...
18. Hydrostatic Pressure application in ANSYS
• Hydrostatic Pressure A...
19. Vertical Pressure Vessel Hydrostatic test analysis as per ASME Guidelines using ANSYS Workbench
• Pressure Vessel Hydros...
20. Lifting Analysis of Horizontal pressure vessel using two lifting lugs in ANSYS, Part-1
• Lifting Analysis of Ho...
21. Lifting Analysis of Horizontal pressure vessel using four lifting lugs in ANSYS, Part-2
• Lifting Analysis of Ho...
22. Introduction to Rotordynamic Analysis Using ANSYS, PART-1
• Introduction to Rotord...
23. Rotordynamic Modal Analysis of Impeller in ANSYS PART- • Rotordynamic Modal Ana...
24. Ellipsoid Head with Eccentric Nozzle & Reinforcing Pad Modelling Using Ansys Design Modular
• Ellipsoid Head with Ec...
25. Hoop & Radial Stress correlation of pressure vessel with FEA using ANSYS
• Hoop & Radial Stress c...
26. Forklifting FEA Analysis of Base Frame using ANSYS
• Forklifting FEA Analys...
27. Sand Casting Metal Melting Process, Induction furnace foundry
• Amazing Sand Casting P...
28. Shaper Machine working principle, mechanism, Surface machining operation
/ watchv=jvx70jrihhy&lis...
29. Amazing Metal Spinning Machine Operation
• Most satisfying Metal ...
30. Introduction to Fatigue Analysis As Per ASME Standards
• Introduction to Fatigu... .
Could you please explain how to assign an acceleration low pass filtering to this analysis? in order to compare it with experimentation thank you.
You can apply only accleration loads, you need to do filtering on the measured data before.
hello sir, thank you for this great video but at the energy summary, i got the energy vs cycles graph instead of energy vs time graph. What is the problem? and can i know how to change it?
You should get energy vs time only. Kindly check in latest ANSYS version.
@@graspengineering9249 im using ansys 16.0... guess ill have to update it. thank you so much sir!
Hello can use in ANSYS lamb wave propagation for cylinder
No, we have not used yet.
Hello Sir, Is it possible to apply angular symmetry in explicit dynamic analysis? Also, I want to see the full model with the results after it is solved with symmetry concept. Please tell me how can I do that. Thank you!
We have not tried such case, we will try to upload such video. Generally it is better to avoid angular symmetry in case of dynamic simulation. Try to model full model and simulate.
9:05 sir why did you rise the element size of the bottom part of gas cylinder ?
This simulation is for explanation purpose only.
hi, i am trying to solve a similar problem but in my case the container has some bodies inside it instead of gas so the bodies inside do not show as much deformation as they should. there is a foam inside the container and a body on the foam. When i run the analysis the foam do not deform as much given there is 2kg load on it and the whole assembly is dropped from 9m height. Any help will be appreciated!
Kindly check the material details for foam and defined proper connections (contact) between all inner components of your container. It should deform as per realistic impact scenario.
Is it possible to probe force reaction in explicit? I applied displacement as a BC and trying to get force reaction to get f-d curve.
Hi ! you can extract reaction on supports. Or else you will need to write script for forces and moment reactions.
@@graspengineering9249 I tried to get force reaction at fixed support BC but Ansys showing question mark❓‼️
@@santoshb6498 You need to keep output setting nodal forces on in modal analysis . If you do this then it will show reactions.
Super bro
Thank You!
If possible explain implicit analysis and also welding analysis in ansys
Okay !
ممنون
Welcome !
Helpful video
Thank you
How to define the end time and the distance of cylinder from the rigid wall.
It is input to the analysis. Ideally we should know how much time it will take for impact. You can run for higher time frame, analysis will show the required time of impact.
Please discuss "Time step too small error".
It is coming due to small element size or length. Try to increase the minimun element length. The min element affect the solution time and sometime it solution come out due to it.
We will add solution to this error in our blopost.
Can you please provide the grabcad link of the geometry?
We had created geometry in design modeler.
Can u please do simulation of drop test with drop test wizard available in ansys
Okay, we will do. Meanwhile please check our explicit simulation playlist for all the videos on explicit analysis.
@@graspengineering9249 if possible drop test of any assembly will be very helpful
How much time you need to complete the analysis?
It is based on your minimum elements size, mesh count, stable time increment, system configuration, etc.
Sir how can we drop it from a certain height, means from 8 or 10 metres?
You can calculate the impact velocity based on respective height.
@@graspengineering9249 how to input that impact velocity?
NICE VIDEO SIR
Thank you
how to draw gas cylinder in ansys workbench
We modelled in design modeler. Please check our CAD modeling videos.
Have done any impact of plastic on rubber
Yes
@@graspengineering9249 energy plot are not crossing..going colser initially and not crossing going away and after few times crossing
@@graspengineering9249 internal energy and kinetic energy plot
@@graspengineering9249 why such behaviour...it should cross directly or should not cross...why energy jumping in plot
Hello Prasad, Present video is just for explanation of explicit dynamic. Most of parameters are assumed.
The kinetic energy of an object the work needed to accelerate a body of a given mass from rest to its stated velocity and in explicit cases we does the same thing as we consider inertia. In drop test simulation at the instance of where the object meet the ground the total potential energy gained at the height of h is transferred to kinetic energy,since there is zero potential energy at ground level. Plot crossing each other means PE is transferred to KE.
You should check hourglass energy, which should be less than 5% to 10% of internal energy, which affect the solution results, inaccurate stress & strain results.
Do you know what a sound mixer is? Almost blew out my speakers!!
Hi... Is regarding Video ?
Also explain icepack analysis in ansys
Okay !
where to get cad
Refer Grancad library
@@graspengineering9249 ok
@@graspengineering9249 grancad or grabcad?
@@navaneeth1087 grabcad
Can I get your email,I am facing some problems while performing similar simulation
Please comment what issue you are facing.