Is this roof framing correct?
HTML-код
- Опубликовано: 28 сен 2024
- Roof rafter framing.
If you like this kind of content, hit the thumbs up button and consider subscribing to the Grand Roofing channel, then hitting the bell notification so you're notified when the next video is up.
Amazon affiliate links
This post includes affiliate links for which I may make a small commission at no extra cost to you should you make a purchase.
GEOCEL 4500 Roof Bonding Sealant
amzn.to/30vKva7
AJC Hatchet MWT-005-MH 17oz Magnet Roofing Hatchet
amzn.to/2UxmT0U
Ladder Stabilizer Standoff
amzn.to/300Xhz2
Yvan Telescoping Ladder,12.5 FT
amzn.to/3pnNpY9
That's a mess!... They need to hire a good carpenter, to rebuild that section.... They should have had a home inspection before they purchased that mess.
As a structural engineer I agree the workmanship is substandard.
That valley is a mess😬. I would have expected jack rafters meeting into a valley rafter or an over-framed roof. However, that is not the case here...
I almost wonder if that chimney and valley/roof was installed later? Some kinda of addition? It looks like the framing was was butchered after the fact and that's also why the plywood is hanging out like that.
The ridge board which you said nothing is supporting in that part of the video. Are you referring to the fact the rafter is missing it's opposing rafter (this being missing is bad). Although can't be 100% sure due to video resolution it looks like there might be some nail holes for that missing rafter. The thing is a ridge board is not load bearing. The load of the rafters is put into the wall and the rafter ties. Some older building may not have a ridge board at all. If there are no rafter ties then it is a ridge beam which would need supported (e.g cathedral ceilings). However, this house has rafter ties (also called ceiling joists).
What you call a cross beam is called a collar tie, and is deals with uplifting forces and is not always needed. Also if the span of the rafters is long enough you may also see a strong back and purlins.
I live in earthquake country annnddd i see this all the time after the last 6.4 quake 2 years ago they are either flattened or red tagged!! This is called the jack of all trades job!a jack of all trades is a master of none!!
It's a disaster waiting to happen.
It’s poorly framed, but I wonder how you will approach this as a roofer. I briefly did repair carpentry for a roofer, but didn’t encounter anything this bad, just replacing rot or framing skylights. Definitely have to point out your doubts about some areas, in case it gets sketchy when you re-sheath.
i would tell the owner to call Mike Holmes (formerly of HGTV) 😟
You only showed us the underside of the structure you said it was valleys you should’ve shown us and outside picture from the other side it wasn’t framed correctly ……..if I was going to estimate it I pull the shingles off then I pull the sheeting up…. then from there I got time and material because!!!!!!!!!!!!!!!!!!!!!!!!!! like Forrest Gump says ,,,,,,,,,,,,, life‘s like a box of chocolates you never know what you’re gonna get !!!!!!!!!!!!!!!!!!!!!!!!!!!!when you got a box of chocolates there……….good luck Samuel bacon
Let the fire get out of the wood stove
Bro u know damn well that's fucked up framing hire union for a little extra money wholly shir
It needs engineering 😂😂😂😂
Ray Charles can see that roof aint built right, lol
That's what I would call a shit-show.
poor framing, although, wood is very forgiving-
As a five year old builder I too have framed these types of structures.
Criminal incompetence by the framers right there. Needs to have the entire roof deck torn off and most or all of the roof framing re-built to something resembling Code compliance.
With some luck they might be able to re-use some of the framing lumber. But even a lot of that appears compromised by water intrusion.
Democrats built that 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Total incompetence. No carpenter built that mess
Please tell me this guy had an inspection done as this would have all been flagged!
hey boss, where are you located? Are you near the west side of South Carolina?
He’s central Indiana
Kokomo, Indian
@@GrandRoofingInc ok thanks. I was going to get an estimate from you. Thanks for the videos!
Poor home owner. The inspector should’ve caught all this.