Thought ide share. Same happened on my 2018 vw tiguan , but before one sends it to garage please try this yourself, as i did today by pure accident and it fixed issue in your vid. Go to screen above steering wheel and turn off all assists, on my car it has two including lane assist, click those boxes so no tick shows, i waited 6 hours to go for drive (as i had an issue and manual says switch off front assists, so i did), but just for whatever reason i clicked on front assists and BINGO Wahooooo it reset itself. Still can't believe it but if that doesn't work yes you need to take it to the garage and get fixed. I forgot to mention i cleaned all my sensors but still error front pilot showed on screen and flashing at the P button. All fixed and with by reading my manual and by pure luck. Very happy and hope this helps. Remember i only turned off assists as i had a problem and manual advised me to do so, they thankfully are back on now and i saved a fortune. Just to add while car is parked (as states in manual) the car runs automatic tests on sensors, assists etc. Both lane and front assist boxes were un ticked when car was in my driveway, engine was switched off. Six hours later i turned on my engine and ticked both lane and front assist boxes to on. Remember on your big screen to un tick automatically to switch on in menu options. Hope this helps.
I had the same problem today, everything was fine but suddenly when i tried to come out of parking this parking assist button started beeping and my rear sensors stopped working. I mean it stopped showing in the screen. I assumed this parking assist have been turned off. Nothing was out of order I don’t think anything would go faulty all of a sudden. What might be the problem?
No , still same . Now I can see sometime the graphic comes on the screen and park assist show as well but sensor doesn’t show the bars and sometime beep for few sec
Hi there good video subscribed ... I have vw jetta 2016 and I got this code B10F514 front park assist speaker fault So where I locate the faulty part? And should I replace the part ?! Thanks
Thought ide share. Same happened on my 2018 vw tiguan , but before one sends it to garage please try this yourself, as i did today by pure accident and it fixed issue in your vid. Go to screen above steering wheel and turn off all assists, on my car it has two including lane assist, click those boxes so no tick shows, i waited 6 hours to go for drive (as i had an issue and manual says switch off front assists, so i did), but just for whatever reason i clicked on front assists and BINGO Wahooooo it reset itself. Still can't believe it but if that doesn't work yes you need to take it to the garage and get fixed. I forgot to mention i cleaned all my sensors but still error front pilot showed on screen and flashing at the P button. All fixed and with by reading my manual and by pure luck. Very happy and hope this helps. Remember i only turned off assists as i had a problem and manual advised me to do so, they thankfully are back on now and i saved a fortune. Just to add while car is parked (as states in manual) the car runs automatic tests on sensors, assists etc. Both lane and front assist boxes were un ticked when car was in my driveway, engine was switched off. Six hours later i turned on my engine and ticked both lane and front assist boxes to on. Remember on your big screen to un tick automatically to switch on in menu options. Hope this helps.
I change the three speakers in a VW Touareg 2011, and it still failing, IDK what to do, I check the module, and the fuse.
I had the same problem today, everything was fine but suddenly when i tried to come out of parking this parking assist button started beeping and my rear sensors stopped working. I mean it stopped showing in the screen. I assumed this parking assist have been turned off. Nothing was out of order I don’t think anything would go faulty all of a sudden. What might be the problem?
1st Go electrician and diagnosis ok
Then you can understand what is the issue
Ok brother
Hi , when you said there was no communication with the module . What did it shown .
My error code is b107a14
Did you manage to get this sorted I’m getting the same error code any idea what it is?
No , still same .
Now I can see sometime the graphic comes on the screen and park assist show as well but sensor doesn’t show the bars and sometime beep for few sec
@@shahmnnsn I believe it’s the speaker, I have the same code so I’m going to order one
Ok brother 👏
Now it’s working by itself
Hi there good video subscribed ... I have vw jetta 2016 and I got this code B10F514 front park assist speaker fault
So where I locate the faulty part?
And should I replace the part ?!
Thanks
Yesh brother only replace part then it's working
@@carhospital can you let me know know whether b107a14 is for faulty module?
Do you mean if this blink that mean it’s a module faulty .
I got Vw touran 2011 and having beep sound for few sec then p button flashing .
Check with scaner which fault coming
I thing any buzzer damage
@@carhospital but the graphic car doesn’t come as well
I have test the buzzer with the scan test and both work .
And did replaced the module but still same
I have the exact same problem. Which OBD scanner will detect if it is the Park assist module or the speaker? I don’t have VCDS
Maxisys elite
@@carhospital do you have a more step by step tutorial on how to take off the vents like you did so I can unscrew the cluster/meter
@@carhospital I bought scanner and I have code B107A14, is it speaker?
Just awsome ❤❤❤❤
Hello do you have WhatsApps number. I get same problem and my fuel level meter also problem. How to fix
It was just the speaker 🤫
English? Maybe?