Washing Machine F06 Error Code Hotpoint Indesit Door won't Open

Поделиться
HTML-код
  • Опубликовано: 28 сен 2024

Комментарии • 196

  • @LurgsHowToGuides
    @LurgsHowToGuides  5 лет назад +6

    Other useful Videos to help you save ⏱TIME and 💰 MONEY:
    =================================================
    How to install a new Washing Machine ruclips.net/video/7FXMLxVTLKU/видео.html
    Washing Machine not Draining Water Fixed ruclips.net/video/WxNRAMWDY2w/видео.html
    Washing Machine Fabric Softener Dispenser not Emptying Fixed ruclips.net/video/R5xIKjWuAIg/видео.html
    Washing Machine Drum Noise Spinning Fixed ruclips.net/video/mJo6IloTP1U/видео.html
    How to Clean your Washing Machine to keep it Hygienically Fresh ruclips.net/video/NbOUDxk7Yxw/видео.html
    How to disconnect a Washing Machine ruclips.net/video/wRtSJ6dK0J0/видео.html
    Washing Machines ruclips.net/video/0_gst8RokRo/видео.html
    Dishwashers ruclips.net/video/6z22-Ysn7rE/видео.html
    Toilets and Plumbing ruclips.net/video/vT5KwJ2A2eU/видео.html
    Combi Boiler ruclips.net/video/1gGEP2y_qHM/видео.html
    How To's, Life Hacks, Helpful Tips here ruclips.net/video/dcmxUTsedlk/видео.html
    Bosch\Siemens:
    Bosch Serie 4 VarioPerfect Washing Machine EcoSilence Drive Review & Wash Cycle ruclips.net/video/IccZCkQfBG0/видео.html
    Bosch Washing Machine SuperQuick 15 minute Wash in Realtime Serie 4 VarioPerfect ruclips.net/video/4YgoBzj5fjQ/видео.html
    Bosch Washing Machine Detergent Drawer Symbols & How to use them ruclips.net/video/SyoOvThCfUA/видео.html
    Bosch Washing Machine Maintenance Tips for Maximum Efficiency Serie 4 VarioPerfect ruclips.net/video/eQZfevfTC-Q/видео.html
    Bosch Washing Machine Display Panel Overview Serie 4 VarioPerfect ruclips.net/video/5Ps19okbE9c/видео.html
    How to remove Aqua Inlet Filter on Bosch Washing Machine Serie 4 VarioPerfect ruclips.net/video/1rvrUKbjt9o/видео.html
    E18 Error Code Fix Bosch Siemens Pump Filter blocked ruclips.net/video/qYjn8xnW3Pc/видео.html
    E32 Error Code Do not Panic ruclips.net/video/JAMGpceI6wc/видео.html
    How to activate Child Lock on Bosch Washing Machine ruclips.net/video/yHMtk7pycG4/видео.html
    How to remove Dispenser Drawer on Bosch Washing Machine ruclips.net/video/cj6ZupxqZEQ/видео.html
    Bosch Washing Machine Door Stuck and How to Open it ruclips.net/video/JGJA8J7cB7w/видео.html
    How to remove Dispenser Drawer from Siemens Washing Machine ruclips.net/video/HXAJlGbF-Vw/видео.html
    Hotpoint \ Indesit Washing Machine How To's:
    =====================================
    Hotpoint Aquarius Washing Machine Detergent Drawer Compartments & What goes Where ruclips.net/video/XSkF_5t6DhE/видео.html
    Washing Machine F05 Error Code Fix ruclips.net/video/0_gst8RokRo/видео.html
    Washing Machine F06 Error Code Door won't Open Fix ruclips.net/video/RCnxTPkQJ90/видео.html
    Washing Machine H2O Error Code Fix ruclips.net/video/gtRyR1gQj6I/видео.html
    How to clean Hotpoint Aquarius Washing Machine Pump Filter and Dispensing Drawer ruclips.net/video/x1E_gBvOtCw/видео.html
    How to remove dispenser drawer from Hotpoint Washing Machine ruclips.net/video/ML5JgFcS4jI/видео.html
    How to remove Dispenser Drawer from Indesit Innex Washing Machine ruclips.net/video/bYL2pHsawbg/видео.html
    How to remove Dispenser Drawer on Indesit Washing Machine ruclips.net/video/tc_e6stJmqY/видео.html
    Indesit Innex Washing Machine Detergent Drawer Compartments & What goes Where ruclips.net/video/uixUXXVMq3I/видео.html

  • @anthonybailly8467
    @anthonybailly8467 3 года назад +2

    My washing machine (left behind by previous owners) didn't have the green tab(!) but the card method worked a charm. Amazing, thank.you!

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад +1

      Anthony Bailly Great stuff. Glad you got it sorted. 😎

  • @nlimbani7773
    @nlimbani7773 3 года назад +1

    My mum and dad bought a Hotpoint WMXTF 742 extra and it was the worst one ever so I recommend a Hotpoint Smart Tech one.

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад

      Thanks for the information

    • @nlimbani7773
      @nlimbani7773 3 года назад

      On my washing machine on the Fastwash 60 program it is so noisy!!!

  • @samurialmo16
    @samurialmo16 4 года назад +1

    Gracias por sus consejos. Me ayudas mucho y varias veces👍

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад

      Me alegro de poder ayudar. Mantenerse a salvo.🙂

  • @spartashousemusic5992
    @spartashousemusic5992 2 года назад +1

    Bro u saved my live❤️

  • @mmservicos6863
    @mmservicos6863 3 года назад +1

    Obrigado pelo vídeo, me ajudou bastante.

  • @miller735
    @miller735 2 года назад +1

    Thank you 😊

  • @chillinbro5423
    @chillinbro5423 5 лет назад +2

    This may have happend to our Wmbf 742

  • @ramzg5402
    @ramzg5402 2 года назад +1

    Thanks a lot

  • @syedabegum7853
    @syedabegum7853 4 года назад

    Thank you soo much this really helped!

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад +1

      Syeda Begum Glad it helped out. Have a marvellous weekend.

  • @lucieburns1904
    @lucieburns1904 Год назад

    Your video came up on a search I did, but although I'm getting the F-06 error (and scary flashy lights), this happens at the start of a cycle, and the door will open, so not sure how to resolve it - any ideas at all, please?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Год назад

      Try powering off for 5 mins at the plug. Else it could just be a real fault, maybe the pump or a computer board fault.

    • @lucieburns1904
      @lucieburns1904 Год назад

      @@LurgsHowToGuides thanks. It's been off at the plug and still showing an error, so I guess it'll be a callout ☹️

    • @LurgsHowToGuides
      @LurgsHowToGuides  Год назад

      @lucieburns1904 yes unfortunately

    • @SomeGuy-lw2po
      @SomeGuy-lw2po 11 месяцев назад

      ​@@lucieburns1904I strongly hope you didn't do a call out or end up replacing a perfectly good washing machine.
      All error 6 means is a fault with your lock, a new one costs £35, and can be replaced with just a small flathead screwdriver.
      I had the same issue

  • @AndrewEdtizz
    @AndrewEdtizz 3 года назад +1

    Love you for that

  • @zakchaouch222
    @zakchaouch222 2 года назад +1

    Merci infiniment.

  • @CartooonTHAT
    @CartooonTHAT 5 лет назад +1

    yep. sometime. you are better off just buying a new one.

    • @LurgsHowToGuides
      @LurgsHowToGuides  5 лет назад +1

      Cartooon THAT Yeh we spent £150 on a dishwasher repair buying a new drainage pump then a week later it just blew up anyway. I try to fix everything but at some point it's time to get a new one.

    • @CartooonTHAT
      @CartooonTHAT 5 лет назад +1

      @@LurgsHowToGuides forgot to mention. i drew you couple of weeks ago. gotta say. you were pretty hard to trace or draw. the likeness was a bit off my overall. you can have a look if you're interested. its on my creating character playlist. along with keanu reeves and patrick swayze. i am trying to redo your character again. trying to get the likeness similar. just letting you know i am working on it ;)

    • @LurgsHowToGuides
      @LurgsHowToGuides  5 лет назад +1

      Fantastic. Thank you so much.

  • @Jackgamingvlogs1476
    @Jackgamingvlogs1476 2 года назад

    Lurgs when do beko wash machines break down bc I have beko and it’s doggy and I want get rid of it

    • @LurgsHowToGuides
      @LurgsHowToGuides  2 года назад

      Depends if you take care of them or not.

    • @Jackgamingvlogs1476
      @Jackgamingvlogs1476 2 года назад

      @@LurgsHowToGuides oh well my washing machines keep leaving black marks I think rubbers might need a clean

    • @LurgsHowToGuides
      @LurgsHowToGuides  2 года назад

      @@Jackgamingvlogs1476 give it a really good clean on all the rubbers and drawer and then run a drum clean programme at 90c to clean it properly

    • @Jackgamingvlogs1476
      @Jackgamingvlogs1476 2 года назад +1

      @@LurgsHowToGuides hey lurgs do you check you draw and rubbers in your wash machine every day if you don’t you should so it’s even more clean

    • @Jackgamingvlogs1476
      @Jackgamingvlogs1476 2 года назад

      @@LurgsHowToGuides done it I clean my wash machine draw every day I take care of it

  • @kathleengallagher6600
    @kathleengallagher6600 Год назад

    What if that F06 code came up you switched the machine off and door opened but then when you went to start it back up again, the locked symbol display was red and beeping what does this mean?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Год назад

      Could be a faulty door latch mechanism. Try resetting the washing machine, I think you can do this by holding the Power button for 3 seconds.

    • @SomeGuy-lw2po
      @SomeGuy-lw2po 11 месяцев назад

      New mechanism can be bought from Hotpoint for £35, easy to change👍

  • @baldfeller
    @baldfeller 2 года назад

    wondering how the clothes got out if powering off didn't fix the issue?

    • @LurgsHowToGuides
      @LurgsHowToGuides  2 года назад

      Did you watch all the video? There’s other things to try as well

    • @baldfeller
      @baldfeller 2 года назад

      @@LurgsHowToGuides I did, when you started you had clothes in there, but when you say powering down didn't fix it, about a minute in, magically the machine is empty.

    • @LurgsHowToGuides
      @LurgsHowToGuides  2 года назад

      @@baldfeller Video editing, it was different days and different clips. Hope you got it sorted.

    • @baldfeller
      @baldfeller 2 года назад

      @@LurgsHowToGuides I did, thanks for the video, I was just being a smart arse.

  • @lyndachabane1931
    @lyndachabane1931 4 года назад

    PLEASE HELP....machine is flashing F 06 but door opens fine ???

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад

      Not sure. If it’s still working ok then don’t worry. Probably has a fault on the door lock sensor.

    • @bradleytaylor5493
      @bradleytaylor5493 2 года назад

      Having this problem too, no idea what to do 🤦‍♂️

  • @crabbyally
    @crabbyally 3 года назад

    Mines is flashing that too but the door is opening.

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад +1

      As long as the door still opens! Could be a faulty door switch

    • @crabbyally
      @crabbyally 3 года назад +1

      @@LurgsHowToGuides managed to get it working again. After ordering a new machine. So cancelled it once I got it going again lol

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад +1

      Great news, that's money saved! 😎

  • @johnchen6714
    @johnchen6714 4 месяца назад +2

    None of these worked for me. But what did work was using a wrench and prying it in and using brute force. It opened and it wasnt even that hard

  • @shabanakausar3188
    @shabanakausar3188 Год назад +2

    I get the fo6 error code on my 7kg hotpoint door does open and close checked filter panel at the bottom filter was clean . Checked for any obstruction there are non ! Still getting the fo6 error code what could it be ?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Год назад +1

      Had similar with ours was a faulty computer board but was cheaper to get a new machine than repair. You could try a reset which is holding in Power button for 3 seconds

    • @SomeGuy-lw2po
      @SomeGuy-lw2po 11 месяцев назад +1

      Mine done the same, but sometimes the lock would get stuck. It's make 5-6 loud clicks where the lock is attempting to unlock. Sometimes it'd fix itself, sometimes it'd get stuck but after a reset it'd be ok.
      Took lock mechanism apart and found it had heavy wear stopping the lock mechanism latching.
      £35 for a new lock, flat head screwdriver to renew, easy.
      Do not replace the machine just for this fault. Not sure why OC decided it was the computer, sure hope it wasn't a repair man who replaced the machine for them...

  • @shay8202
    @shay8202 2 месяца назад +1

    F-06 code is a simple fix for £19 as the lock only needs replacing! There are many videos on how to do it on RUclips! Unless you want to waste money and buy a new one when your one can be perfectly fine after just the lock replacement

  • @Bulgar1us
    @Bulgar1us Год назад

    Never buy this bread, I have error f11, me pump its fine also filter and all rest it's clean. Now I get f5 than f6.. Me machine have 6 year warranty and at all machine it's work 8 months. So don't do me mistake to buy this brand.

  • @Qianwashere
    @Qianwashere 3 года назад +5

    Thank you so much. Pulled that green cord and it worked! Such a relief!

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад

      Phew, great news. Glad that I could help out today. 😎

    • @samanthab8807
      @samanthab8807 Год назад +1

      I'm not a strong person physically but it was a lot easier than the video luckily!

  • @doglover893
    @doglover893 4 месяца назад +1

    Thank you for the video, it is very useful. x

  • @MortezaParkook
    @MortezaParkook 3 года назад +5

    You need to change the door lock switch, don’t throw it out!

  • @mukomanathan4044
    @mukomanathan4044 2 месяца назад +2

    You are life and financial saver. I pull that cord and it worked after the third time

  • @mzpreciouz86
    @mzpreciouz86 5 месяцев назад +1

    Absolute life saver! Couldn't get my machine opened or drained. Thanks for your advice ❤

    • @LurgsHowToGuides
      @LurgsHowToGuides  5 месяцев назад +1

      My pleasure, glad my video was helpful. 😎

  • @mattcope8982
    @mattcope8982 4 года назад +2

    I always wonder what that green thing was for.... thank you buddy, you're a life saver....👍

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад

      Glad to help out and great you got it open. 😎

  • @KirstyMcskimming
    @KirstyMcskimming 3 месяца назад

    My red lock is showing on my machine but the door isent locked but keep getting the f06 code but door is open

  • @TheSparkey40
    @TheSparkey40 5 лет назад +2

    Not sure you should wear sandals when moving heavy loads... health & safety issue...👍

    • @LurgsHowToGuides
      @LurgsHowToGuides  5 лет назад +1

      Good point, especially if you have Hobbit Feet. I'll get my Steel toe capped boots out next time.

  • @dritonkrasniqi1835
    @dritonkrasniqi1835 Год назад

    Isn not problem to pay new mashine to seting the old mashin the job

  • @taliarose3500
    @taliarose3500 3 года назад +1

    Aqualtis 11KG. Locate the position of the lock by gently prising the top of the door and shining a torch down the gap. Switch the machine on and pull on the door giving it a thump over the lock position with the edge of a closed fist or something heavy wrapped in something soft. It's the only way I can get the lock to free off when it gets stuck because the door part has a loop section, which engages into a hook inside the lock itself, and it can't be freed off by any off the above means. A spray of WD40 inside the lock area and a few goes at locking and opening the door stopped it happening again. Run an empty/cleaner wash cycle after using WD40 just in case any has got onto the rubber gasket.

  • @KirstyMcskimming
    @KirstyMcskimming 3 месяца назад

    Mines is open wen u get the code and I can't get to do a washing I turned it off and done the filter still saying same

  • @megabudzik7507
    @megabudzik7507 Год назад +1

    THX,,,Man,,,just cut the power for 5 min.,and actually works😎

  • @oguzgundogan2354
    @oguzgundogan2354 3 года назад +1

    Thank you for the video I saved £600
    Managed open the washing machine and cleaned the pump I cancelled my currys order.

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад

      Wow great result, really good news. Glad I could help. Have a Merry Christmas. 🎄

  • @marianichola5218
    @marianichola5218 4 года назад +1

    Managed to get the door open after trying it little tab underneath the front panel. I'll check if it's working and fixed tomorrow and report back. Thanks for the video.

  • @pedrogomes7046
    @pedrogomes7046 5 месяцев назад +1

    Thank you, man!

  • @melpixton7933
    @melpixton7933 3 года назад +8

    This was an absolute life saver thank you so much! This video paired with a few of your other videos helped me to salvage my clothes that were stuck in the machine, drain the water and clean out the pump filter which helped solve the draining issue my washing machine was having! Can't thank you enough 😊

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад +1

      Great stuff, well done for fixing. Glad I could help out. 😎

    • @freddyveys4997
      @freddyveys4997 2 года назад +1

      All this you could find in the manual, but you have to read it of course

  • @dmxit
    @dmxit 2 года назад +1

    You beauty, my door got stuck mid cycle after something blew up and couldn’t open the door. Thank god for that green pull override you mentioned. Thank you soo much.

    • @LurgsHowToGuides
      @LurgsHowToGuides  2 года назад

      Great news. Glad to help. Merry Christmas 🎄😎

  • @keduslejiyared8701
    @keduslejiyared8701 4 года назад +1

    mine is yellow and its on the left side but it still worked so thank you so much

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад

      Leji Kedus -_- Great stuff. Happy to help out. 😎

  • @traceyscott8449
    @traceyscott8449 4 года назад +2

    Thankyou ! I managed to get my clothes out ok !

  • @markhodgson2348
    @markhodgson2348 3 года назад +1

    rubbish modern equipment

  • @YRivera1
    @YRivera1 2 года назад +1

    Thanks. Mine didnt have the tag, but when I took off the panel it stopped and the door opened.

    • @LurgsHowToGuides
      @LurgsHowToGuides  2 года назад

      Great news, and glad I could help out. 😎

    • @YRivera1
      @YRivera1 2 года назад

      Actually, to clarify the door opened when I put the panel back, just in case someone sees this.

  • @QuarantaQuattro
    @QuarantaQuattro 11 месяцев назад

    Why my machine dosent have that green to pull ?

  • @sairaqsa
    @sairaqsa 10 месяцев назад +1

    Thank you for your great help man.
    Best wishes from IRAQ.

    • @LurgsHowToGuides
      @LurgsHowToGuides  10 месяцев назад

      My pleasure, glad I could help out, my videos do get around the globe! 😎

    • @lorraineq
      @lorraineq 4 месяца назад

      Why is Iraq,Iran,and dubai not taking in palestian,or ANY MUSLIMS THAT CROSS THE CHANEL,WE ENGLISH&IRISH ARE BEING INVADED .

  • @Ofwlife20225
    @Ofwlife20225 5 месяцев назад +1

    Thank you so much, now I open it❤

  • @crabbyally
    @crabbyally 3 года назад +1

    My door opened there no problem.

  • @RachelJaneHorder
    @RachelJaneHorder Год назад

    Pulled the cord and it came out completely !! 😬

  • @nlimbani7773
    @nlimbani7773 3 года назад +1

    My machine is leveled

  • @elainemcshane8298
    @elainemcshane8298 3 года назад +1

    Pulled the green cord and door opened, great, thanks for the advice!

  • @nihadrehimov9701
    @nihadrehimov9701 3 года назад

    Gijdillaxdiye

  • @trendingph5116
    @trendingph5116 3 года назад +1

    Thank tou very mich, that’s really helpful

  • @alsayad21
    @alsayad21 6 месяцев назад +1

    Thanks so much my friend

  • @27rimmer
    @27rimmer 2 года назад +1

    Thank

  • @jillgibbon6354
    @jillgibbon6354 Год назад +1

    Brilliant advice, green lever did the job

  • @petrancube1801
    @petrancube1801 Год назад +1

    Great help, thank you sm

  • @suryamarga4586
    @suryamarga4586 4 года назад

    manchmal hilft einfach stecker ziehen dann geht die tür auch von selber wieder auf. f06 ist der fehlercode für ne defekte platine

  • @bladimirovick
    @bladimirovick 4 года назад

    Someone know where I can find the schematic of Hotpoint 7kg?

  • @snehamariyabennym2056
    @snehamariyabennym2056 Год назад

    I try it

  • @OnlyInRomford
    @OnlyInRomford Год назад

    Why does it do this at random times how do I prevent?

    • @LurgsHowToGuides
      @LurgsHowToGuides  Год назад

      Not sure, sounds like a faulty door latch.

    • @SomeGuy-lw2po
      @SomeGuy-lw2po 11 месяцев назад

      Door lock is failing, £35 for a new one direct from Hotpoint. Easy to renew.
      I took my faulty one apart to see why it failed, I found a small plastic lever inside that had heavy wear so when the solenoid operated the latch wouldn't always catch. Resulting in the mechanism seizing.

  • @djellalisonia
    @djellalisonia Год назад +1

    Thank you for this information

  • @bethanr249
    @bethanr249 Год назад +1

    Thank you, this saved the day!

  • @starc0n464
    @starc0n464 2 года назад

    2 years ago my dad did the green cord trick but when daddy was starting the washing machine and it will not start

    • @LurgsHowToGuides
      @LurgsHowToGuides  2 года назад

      Maybe try a power off then retry. Hope you can get it going

  • @anitaharrison5171
    @anitaharrison5171 5 лет назад +2

    Anita

    • @LurgsHowToGuides
      @LurgsHowToGuides  5 лет назад

      Anita? Hopefully I helped you out. If you would like more How To tips like this video then please subscribe, I am always posting new Videos to help you save ⏱TIME and 💰 MONEY. Have a great week and thanks for visiting my Channel. Lurgs.

  • @nlimbani7773
    @nlimbani7773 3 года назад

    My Hotpoint washing machine is very noisy on the Fastwash 60 program!!!

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад

      Oh dear, they can be a bit noisy sometimes. Check that the washing machine is level

  • @khalijah_hassan
    @khalijah_hassan 2 года назад +1

    Very helpful. Thanks

  • @27rimmer
    @27rimmer 2 года назад +1

    Thank you very helpful 👍

  • @JonnyYogurts
    @JonnyYogurts 2 года назад +1

    Life saver, thank you

  • @sadiasaid5565
    @sadiasaid5565 Год назад +1

    Thank you 🙏🏿

  • @georgepanteli6148
    @georgepanteli6148 4 года назад

    Thank you very much ,5' switch off the power and it released ( Indesit innex error F06)

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад

      Brilliant. Glad to help and glad you got it sorted.🙂

  • @gkguillem
    @gkguillem 5 лет назад +1

    Thank you very much! Solved my problem

    • @LurgsHowToGuides
      @LurgsHowToGuides  5 лет назад +1

      Fabulous. Glad to help out. Have a marvellous week.

    • @gkguillem
      @gkguillem 5 лет назад +1

      @@LurgsHowToGuides Thank you again, keep up your great work!! And have a great week as well

  • @snehamariyabennym2056
    @snehamariyabennym2056 Год назад +1

    Worked it !😍

  • @IloveMelodie3
    @IloveMelodie3 3 года назад +1

    De unde stii romana

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад

      Sorry I don't, it's just Google translate of my English! Hope it was useful though and translated ok.

    • @IloveMelodie3
      @IloveMelodie3 3 года назад

      @@LurgsHowToGuides i m from romania

  • @nadege5682
    @nadege5682 4 года назад +1

    great thanks a lot

  • @QualityGamer1972
    @QualityGamer1972 4 года назад

    I tired to cord pulling trick on my parents washing machine worked a treat man cheers for the tip 👍🏻

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад

      Yay brilliant. Glad I could help you out and your parents. 😎

  • @blackout2922
    @blackout2922 3 года назад +1

    👍🏾

  • @hakunamatata745
    @hakunamatata745 5 лет назад

    Check the wiring loom sometimes connector block at fault

  • @acquadorata
    @acquadorata 5 лет назад +1

    very useful! thanks

    • @LurgsHowToGuides
      @LurgsHowToGuides  5 лет назад

      Massimo Chilin Glad to help, hope you got it sorted

  • @nf2626
    @nf2626 4 года назад

    Advice please,mine says door open when it’s not, f-06 flashing ,

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад +1

      Oh, sounds like a faulty door sensor. Give it a gentle whack, if not then time to call someone out probably.

    • @nf2626
      @nf2626 3 года назад

      @@LurgsHowToGuides ,I did it’s working for now.thanks👍🏻👍🏻😂

  • @fire_t_e_a_m_5438
    @fire_t_e_a_m_5438 4 года назад +1

    Капе ошибка f09 что делать?

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад

      Это ошибка компьютера. Возможно, плата предохранителей промокла. Вы можете попробовать отключить его на 20 минут.
      Удачи.

  • @martinliveley8878
    @martinliveley8878 3 года назад

    Still didn’t show how to fix the error code though

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад

      If it still keeps happening it's probably a faulty door switch.

  • @mohamedbenhariz250
    @mohamedbenhariz250 3 года назад +1

    Un grand merci 👏

  • @anthonmyl
    @anthonmyl 3 года назад +1

    Grazie)

  • @amadeusclifford5323
    @amadeusclifford5323 2 года назад

    grazie davvero per questo tutorial ho aperto lo sportello👍

  • @nanoaswad4772
    @nanoaswad4772 3 года назад

    I tried to pull the cord but it broke😢😢

    • @LurgsHowToGuides
      @LurgsHowToGuides  3 года назад

      Oh dear that’s unfortunate, is there a bit of it left so you could get some pliers on it to pull it down?

  • @immarkhan8286
    @immarkhan8286 4 года назад

    Thank you so much! I tried the green tab thing and it worked!!

  • @IAmRJai
    @IAmRJai 3 года назад +1

    I've already liked this video without trying the suggestions yet simply because people like you make life so much easier. Thanks for taking the time to post this. 🍻

  • @anitaharrison5171
    @anitaharrison5171 5 лет назад

    Anita

  • @Neil2022
    @Neil2022 4 года назад

    F6 on my hotpoint, the door won’t lock

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад

      Oh, sounds like it could be a faulty door switch.

    • @Neil2022
      @Neil2022 4 года назад

      And it doesn’t have screws on the outside to remove it☹️

    • @LurgsHowToGuides
      @LurgsHowToGuides  4 года назад

      @@Neil2022 If the door opens then you should be able to replace the door switch.

  • @nlimbani7773
    @nlimbani7773 3 года назад +1

    I would have a lovely cup of tea in the morning on the weekend

  • @Железныйчеловек-ы5я
    @Железныйчеловек-ы5я 8 месяцев назад

    Бесполезное видео.

  • @misfortune5007
    @misfortune5007 5 лет назад +1

    Same error on whilpool. Washing machine was showing f06 and drain pump was constantly activated. Left the machine unpluged and didnt help, but after removing and emptying the filter down at the bottom the door opened and didnt have a problem since.

    • @LurgsHowToGuides
      @LurgsHowToGuides  5 лет назад

      Brilliant news. Good result. Glad it's sorted. Have a great week.