Xbox Fam,, the fix is EASY, WAAAAY easier than any other complicated fix. RESET YOUR XBOX BY HOLDING THE POWER OFF/ON BUTTON FOR 15 SECONDS... If this does not work than do it again and unplug the Xbox360 cords from console for20-30 seconds. This Sync issue happens to me to this very day in 2024. Wife is playing Drago Age Origins & Singularity.
However, good job on the video. I do agree that the cause of these issues is usually electrical interference, or a short of some sort, either somewhere in the grounding, or in the actual RF/ring of light circuit board itself. I have had many controllers/units that simply would NOT connect wirelessly, thankfully as soon as the "play and charge" cable is connected, the controller will re-sync with the unit and, once done, should not need to be re-sync'd unless you connect it to another console.
Thank you for sharing this. In our case, it turned out to be an earthing issue. Your video helped us figure out the problem. Thank you again. And don't worry about the carpet. I'm not sure what carpet some folks were expecting to see, but it certainly didn't seem to be the focal point or the purpose of the video, lol. Thank you again for your time.
I can't believe I didn't check the console last year after I applied fresh thermal paste. When I reassembling the 360 Slim Console, I forgot to tighten 4 of the 5 Black Screws that hold the bottom plastic panel to the top metal bracket panel. So here's what the problem was. When you would try to sync the controller to the console, the sync button on the face would bottom out before it could hit the small on/off sync button on the logic board. I tightened the screws & the front sync button was lined up perfect with the logic board. Man I felt dumb there man... But glad I figured it out....
Adding another thanks- it was definitely earthing (whatever that means)- I turned my unit sideways and voila, fixed. Gotta love a quality $400 machine that is easily knocked out of sync by the subtle vibrations of the earth
Your are a life saver I almost broke my controller it wasn't connecting and I tried three different controllers and battery packs so I tried the DVD method and it worked.
I got lucky and got a silver remote to the xbox 360 slim and it's been flashing for about an hour now so I went on the internet and looked for a while.. 1 week later I find this. Thank you
Well despite some of the rude comments here, your video helped me fix my connection issues. Just a simple problem of cleaning under the faceplate and hard drive. Thanks!
My controllers wouldn't sync either. On the 360 s I got them synced by holding down the sync buttons on both the controller and the sync button on the console at the same time. There is a button on the front of the console.
You can disassemble the 360 without a master key. I've done it many times with just a small screwdriver while gradually applying pressure to the case corner to pry it open. Never damaged any of the locking points.
THANK THE LORD!!!!! Thank you for these tips they REALLY helped and it connected when I applied pressure to the top and bottom... RATED - COMMENTED - SUBSCRIBED
If any of these aren't working just put your controller about 2 inches away from the console and sync button on the controller and the console at the same time.
my xbox wont spin u know when u try to connect ur controller ur xbox and controller light spin and my xbox light circle thing doesnt spin? any help or advise
same here i was playing with Dvd tray not letting it close all the way by a hair let me boot up but not exactly sure why and lights on control and Xbox worked for me a few times
Heres another reason to add: Mine failed to connect because the HDMI was not properly connected to the TV. The controller was communicating with the console but after trying to connect, all 4 circular lights would just flash slowly, changing batteries, etc did nothing. When the HDMI was reconnected, all worked OK. AND ANOTHER: Make sure the controller and console are PAIRED or Synced using the buttons on the controller and console.
Dude! This was what I was looking for! I recently added an HDMI switch to my TV. It has an HDMI in to the TV and 3 HDMI outs essentially increasing the number of HDMI ports available on my television. There is a button that switches between port 1, 2 and 3. The xbox is plugged into port 2. Whenever a device that is plugged into this switch is activated, the switch defaults to port one. You have to push the button to choose port 2 or 3. I had no idea that the console would not communicate with the remote if it did not sense an HDMI connection. When I read your reply I knew right away because I just started using the switch yesterday. Thanks!
the window and ir receiver is for the dvd remote. the board with the 4 led lights is the controller receiver. it probably has broken solder joints and might need replacing. wouldn't recommend pressing on capacitors. you could brake the seal or short them out.
I figured the controller board was the issue but thanks to the eraser trick my 360 has worked fine for one year now. If it break again I'll just resolder all the points and check the tracks for breaks. I included the 'blowing down the hole' trick because it actually works; no idea why but it worked for me a few times.
lifeschool My xbox wont connect to the tv at all through an hdmi chord or the avi chord and the controller will not connect to the xbox at all. I have tried all possible solutions and still haven't gotten anywhere with it. removing memory drive, wiggling disc tray, unplugging and plugging in all wires (including controlers) and all the above ideal solutions I have looked up. The last thing I have yet to do is call up MS. Any ideas before I do?
ha-ha, yes, my controller is very dirty. Thats how it came when I bought the machine second hand, and as I knew it would get into that state again I didn't bother cleaning it. I sweat a lot when using controllers, especially old type joysticks.
I have done everything this video suggested and yet my controller will not connect to my xbox. I have even went as far as what some videos suggested, putting another game into the console. It worked the first time but months later (now) my xbox refuses to connect even when i try that. I have no clue what the problem is at all.
not working... my controller just wont sync at all and i really need a way to fix it because i have a blank screen on my tv and i need to reset it with my controller (y + rt) PLS HELP ITS SO FRUSTRATING
i just installed modded rol and when i put my xbox back together i observed that my controller is not working neither the rol except when i press the sync button. i thought i broke my chip and lost all hopes of fixing it but when you told that there might be earthing between the circuit, i opened my xbox and saw that i have soldiered two joints together so i took my soldering iron and separated those two joints that was causing this issue. thanks
I've recently had problems with connecting my controller to a wireless adapter on my computer. It in fact connects just fine, but it acts as if it was the mouse for some strange reason, which makes it incompatible with my games.
Still having this issue but oddly enough? I put one of my games and it didn't read as a game but as a DVD so I went into the dvd player. And after I exited out of it, my controller connected.
After performing an RGH 3 modification on an Xbox 360 Slim, controllers only work when held very close (~30 cm) to the console. At any greater distance, they lose the connection, and the Xbox logo light on the controller blinks. We’ve tested three different controllers, all with the same result. What could be the issue?
I have a custom gold casing for my controller that i bought on eBay. The gold coating is causing bad connection. Do you know if there or any areas i need to remove gold coating to make it more functional as that it is stylish.
Not trying to be rude, but the "sensor" you wiped clean on the left side of the xbox has absolutely nothing to do with the controllers. That is the Infrared receiver for the media remote. The receiver for the wireless controllers is the circuit board with the "ring of light" on it on the front right of the xbox. That is the one and only part inside the xbox that is responsible for communication between the controllers and the CPU itself.
the controller only blinks twice when I press the big button. Nothing seems to respond after that, even syncing from console, or small sync button. Typical Microsoft. Next machine will be a PlayStation.
Dude, take out the little back of the controller with the battery, there will be a small metal plate (tiny) sticking up, you need to fiddle woth that to get it to work, and atlease xbox controllers don't break as easy as the playstation controller
hi, I kinda covered this with point #18 in the guide when I talked about the front circuit board issue. As I did, you pushed it forward, but without taking the machine apart. Neat trick. However, I used the tip of a pencil eraser to wedge behind the board to prevent it from happening again. I'd say this 100% fixed my problem. ;)
I think the problem is my controller, I recently bought a wireless gaming receiver and it wouldn't connect with my controller, I just tried to play on my xbox and now I can't seem to connect with my XboX either. Did my receiver somehow mess up my controller? I have two and neither work on any device. I've switched batteries and battery packs and nothing works.
I broke my other controller, ( joy stick) so I got a used one for a xbox 360. I have the slim. My original controller connects, no problem. but the white one will not sync. Any help. as this issue is not covered anywhere.
Your other controllers could possibly be connected to another source that is permanent. Which if its permanent, theres no way to fix it unless you recable the controller, or just buy a new one. Sorry.
Thanks was at a loss as to why could not get new (ish) remote to connect to Xbox. Gonna subscribe just in case we need further help...we came late to Xbox 360 as daughter (10th birthday present) got hooked on male friends xboxes and i rather they came here then she go where I cant see lol
thanx man it worked good advice e other ones didnt work for me but the cable one the one that you said that you need to check if all your cablles are connected good you said and i checked but one of them was wabaly so i fixed it and it worked thx man
I'm having a problem that isn't really like this but it is, it won't give me any options at all to connect to wireless networks and to configure them and when I click Wireless it says I need a Wireless adapter, please help!
You need to plug in a small wifi wireless gizmo into a usb on the xbox to get the wireless signal. If you google '360 wireless adapter' you will see various small widgets which will NOT work. You must buy genuine 360 adapter. Tbh its quicker and better to buy a long cat 5 lead and use a wired link.
Mine wasn't working and I tried everything. I tried connecting the controller to the Xbox and it did the continuous blinking after the lights synced on the xbox and controller. I then turned off the Xbox and tried to turn it on from the controller. The Xbox turned on and then I pressed sync again and the controllers connected.
Hi, I have a problem, every time I put on my xbox 360, the light doesn't come on and it says something about insufficient ventilation even though I cleaned it thoroughly, when I want to connect my controller, it just keeps flashing and it doesn't want to connect, I press sync on my xbox and controller but they wont work, PLEASE HELP ME!!!😥🥺
Im not an expert. Search for X-clamps, as you might need to attach one to make it work. I bought an X-clamp and fan combo but never bothered to fit it.
hello well look i have 2 controllers one is connected normally even if i resync it ..it ll connect in a second the other one wont connect at all .. keeps flashing and thats it .. so i assume the prob is from the controller itself ??? since the other one works perfectly ..please help thnk u
Hmm. I pressed power button to turn console off but it restarted. The controller turned off by itself. When I pressed the guide button on controller, it synced as though nothing had gone wrong. I guess try cycling the power first. Weird.
BRUH SIX YEARS LATER AND IM HERE TO SAY TTTHHHAANNKK YYYOOOUUU
GUESS WHAT IM STILL HERE TOO
Mine is wireless and syncing won’t work so hopefully I find a fix
@@Sprangatang mine doesn't even have the connection button
Did not help me ;(
8 years later thanks you 🔙🔛🔝
Xbox Fam,, the fix is EASY, WAAAAY easier than any other complicated fix.
RESET YOUR XBOX BY HOLDING THE POWER OFF/ON BUTTON FOR 15 SECONDS...
If this does not work than do it again and unplug the Xbox360 cords from console for20-30 seconds.
This Sync issue happens to me to this very day in 2024.
Wife is playing Drago Age Origins & Singularity.
Didnt work lol
MAKE SURE YOUR CONSOLE IS CONNECTED TO YOUR TV.
Your system's controller will not sync if your console isn't plugged into the TV.
Omg this was me, turned it on and now it works. Thank you so much. I am an idiot
Most helpful comment ever...stay blessed sir
Travis Garman you saved my life. Thank you
i just got my 1st xbox/used. turn it on and xbox appirs on tv. thats all . controler sync. disk loaded. NOTHING..... please help'
Travis Garman I appreciate you
However, good job on the video. I do agree that the cause of these issues is usually electrical interference, or a short of some sort, either somewhere in the grounding, or in the actual RF/ring of light circuit board itself. I have had many controllers/units that simply would NOT connect wirelessly, thankfully as soon as the "play and charge" cable is connected, the controller will re-sync with the unit and, once done, should not need to be re-sync'd unless you connect it to another console.
This is the very first RUclips video I have watched that actually helps well done man
I’m here 7 years later and I approve this meesage
@Gatlin Scott stop spamming
@Maverick Jesse stop spamming
Thank you for sharing this. In our case, it turned out to be an earthing issue. Your video helped us figure out the problem. Thank you again. And don't worry about the carpet. I'm not sure what carpet some folks were expecting to see, but it certainly didn't seem to be the focal point or the purpose of the video, lol. Thank you again for your time.
1:40 I did that strategy and it worked like a charm! Thank you!
You don't fucking know how much i respect you for putting the tips in the desc.
if anyone else is like me and has the next gen xbox 360 the button to resync your controller on the system is by the usb port
Yep. Can't get my new one to connect
I can't believe I didn't check the console last year after I applied fresh thermal paste. When I reassembling the 360 Slim Console, I forgot to tighten 4 of the 5 Black Screws that hold the bottom plastic panel to the top metal bracket panel. So here's what the problem was. When you would try to sync the controller to the console, the sync button on the face would bottom out before it could hit the small on/off sync button on the logic board. I tightened the screws & the front sync button was lined up perfect with the logic board. Man I felt dumb there man... But glad I figured it out....
You don't need a key not at all, you just need some sort of point or needle to push the tabs individually and they just pop and it's really easy
hahha
Nothing was working, but this one did. Thanks man.
Adding another thanks- it was definitely earthing (whatever that means)- I turned my unit sideways and voila, fixed. Gotta love a quality $400 machine that is easily knocked out of sync by the subtle vibrations of the earth
1st suggestion worked. You da man, saved our night!
1st time playing video games in 12 years
Thank you! These tips helped me. The HDMI cable wasn't plugged in all the way
Your are a life saver I almost broke my controller it wasn't connecting and I tried three different controllers and battery packs so I tried the DVD method and it worked.
OMG!!!!I just did what you suggested and fixed my son's controller that was out long time ago.THANK YOU SO MUCH.
I got lucky and got a silver remote to the xbox 360 slim and it's been flashing for about an hour now so I went on the internet and looked for a while..
1 week later I find this. Thank you
Thanks so much! Fixed my controller wishing 30 seconds of the video
Well despite some of the rude comments here, your video helped me fix my connection issues. Just a simple problem of cleaning under the faceplate and hard drive. Thanks!
Thank you so much number 7.worked for me eject the game jiggel dvd push the button on the controlla and now it's working.
My controllers wouldn't sync either. On the 360 s
I got them synced by holding down the sync buttons on both the controller and the sync button on the console at the same time. There is a button on the front of the console.
The light on the controlled won't even come on... I've tried changing batteries, using another controller... It won't work
its been three years now but im sure its because of the battery pack
like the box
Same problem with mine, check the terminals for the battery they get corroded and once u scrape the corrosion off it'll work.. at least mine did
BRUH IT'S BEEN 8 YEARS TTTHHAANNKKSSS YYYOOOUUU SSSOOO MUCH
thank you soooo much I didn't realize how many times I had to try it again. thank you!!!
Your my hero
You can disassemble the 360 without a master key. I've done it many times with just a small screwdriver while gradually applying pressure to the case corner to pry it open. Never damaged any of the locking points.
THANK THE LORD!!!!! Thank you for these tips they REALLY helped and it connected when I applied pressure to the top and bottom...
RATED - COMMENTED - SUBSCRIBED
You're a genius man the pressure thing did the trick thank you
If any of these aren't working just put your controller about 2 inches away from the console and sync button on the controller and the console at the same time.
LETS GO FUCK YES THANK GOODNESS MAN
Just a friendly tip and my two cents worth of advice. Good luck to everyone suffering with this problem.
THANK YOU I HAVE A NEWER VERSION AND IT STILL WORK
all 4 lights blink on my scuf and the sync button on my controller won't sync
Thank you so much number 7.worked for me eject the game jiggel dvd push the button on the controlla and now it's working.g
my xbox wont spin u know when u try to connect ur controller ur xbox and controller light spin and my xbox light circle thing doesnt spin? any help or advise
same here i was playing with Dvd tray not letting it close all the way by a hair let me boot up but not exactly sure why and lights on control and Xbox worked for me a few times
Thank you disc tray being ejected was the issue for me
Awesome! I have being trying to figure out how to reconnect my controller for weeks now. Step three did it. Thank you.
02 Feb 2016
very helpful i'll fiks my issues in 2024 through this video
Heres another reason to add:
Mine failed to connect because the HDMI was not properly connected to the TV. The controller was communicating with the console but after trying to connect, all 4 circular lights would just flash slowly, changing batteries, etc did nothing. When the HDMI was reconnected, all worked OK.
AND ANOTHER:
Make sure the controller and console are PAIRED or Synced using the buttons on the controller and console.
Dude! This was what I was looking for! I recently added an HDMI switch to my TV. It has an HDMI in to the TV and 3 HDMI outs essentially increasing the number of HDMI ports available on my television. There is a button that switches between port 1, 2 and 3. The xbox is plugged into port 2. Whenever a device that is plugged into this switch is activated, the switch defaults to port one. You have to push the button to choose port 2 or 3. I had no idea that the console would not communicate with the remote if it did not sense an HDMI connection. When I read your reply I knew right away because I just started using the switch yesterday. Thanks!
Excellent. Glad to help!
You just saved my life
the window and ir receiver is for the dvd remote. the board with the 4 led lights is the controller receiver. it probably has broken solder joints and might need replacing.
wouldn't recommend pressing on capacitors. you could brake the seal or short them out.
I figured the controller board was the issue but thanks to the eraser trick my 360 has worked fine for one year now. If it break again I'll just resolder all the points and check the tracks for breaks. I included the 'blowing down the hole' trick because it actually works; no idea why but it worked for me a few times.
lifeschool My xbox wont connect to the tv at all through an hdmi chord or the avi chord and the controller will not connect to the xbox at all. I have tried all possible solutions and still haven't gotten anywhere with it. removing memory drive, wiggling disc tray, unplugging and plugging in all wires (including controlers) and all the above ideal solutions I have looked up. The last thing I have yet to do is call up MS. Any ideas before I do?
thank you so much I was so board now I can play my Xbox 360 u earned a subscribe and like
THANKU so much my brother .. just ejecting disk I was able to re connect my controller. thanks again
ha-ha, yes, my controller is very dirty. Thats how it came when I bought the machine second hand, and as I knew it would get into that state again I didn't bother cleaning it. I sweat a lot when using controllers, especially old type joysticks.
Always buy the cheap stick on grips jus for sweaty hands. Works great. They r cheap 2 maybe 5 bucks
My RF module might be faulty because I tried everything and it didn't work.
best and most thorough understanding
I have done everything this video suggested and yet my controller will not connect to my xbox. I have even went as far as what some videos suggested, putting another game into the console. It worked the first time but months later (now) my xbox refuses to connect even when i try that. I have no clue what the problem is at all.
Mine flashes forever
Same
Cody same
Same. I had to buy a wired one.
Father Louis Williams Suga Adams the Third did you try unplugging the power (the one that’s plugged into the Xbox) and plugging it back in?
Cody same
not working... my controller just wont sync at all and i really need a way to fix it because i have a blank screen on my tv and i need to reset it with my controller (y + rt) PLS HELP ITS SO FRUSTRATING
Oh man, this fixed it for one of my controllers not wanting to connect. Cheers mate. :)
i just installed modded rol and when i put my xbox back together i observed that my controller is not working neither the rol except when i press the sync button. i thought i broke my chip and lost all hopes of fixing it but when you told that there might be earthing between the circuit, i opened my xbox and saw that i have soldiered two joints together so i took my soldering iron and separated those two joints that was causing this issue. thanks
Thanks man. Don't have to watch full vdo. In min was working
I've recently had problems with connecting my controller to a wireless adapter on my computer. It in fact connects just fine, but it acts as if it was the mouse for some strange reason, which makes it incompatible with my games.
I doubted you but you prevailed. Thank you 🙏🏾
Still having this issue but oddly enough? I put one of my games and it didn't read as a game but as a DVD so I went into the dvd player. And after I exited out of it, my controller connected.
Do you have one of these for the slim? Mine started doing this yesterday or the day before.
Thanks, sat here thinking my controller was not working forgot about the button next to the power on console lol
This video just saved my life, I was about to take a sledgehammer to my controller!
Omg thanks all I had to do was hold the botton on the controller and on the Xbox at the same time!!
After performing an RGH 3 modification on an Xbox 360 Slim, controllers only work when held very close (~30 cm) to the console. At any greater distance, they lose the connection, and the Xbox logo light on the controller blinks. We’ve tested three different controllers, all with the same result. What could be the issue?
Useless nothing changed on mine
Cheers mate, finally I can play my new xmas Xbox games
I have a custom gold casing for my controller that i bought on eBay. The gold coating is causing bad connection. Do you know if there or any areas i need to remove gold coating to make it more functional as that it is stylish.
Dude!! Thanks so much it was a big help this has been going on for literally days and i had no idea what was wrong i can't thank you enough xD.
My controller is just blinking 2 times when i start it.. and then it is turning off. what to do?
please help!
Change the batteries
Lol. Obviously i tried that!
Hi, i have a joystick that not working, when i push the middle button the light pulse only twice and nothing. can you help me. thnx.
I took the front of my xbox and restarted it and my controller recontected, Thanks.
they really helped me out to play GTA V for thank you so much
Not trying to be rude, but the "sensor" you wiped clean on the left side of the xbox has absolutely nothing to do with the controllers. That is the Infrared receiver for the media remote. The receiver for the wireless controllers is the circuit board with the "ring of light" on it on the front right of the xbox. That is the one and only part inside the xbox that is responsible for communication between the controllers and the CPU itself.
Thank you! Now my controller is synced!
the controller only blinks twice when I press the big button. Nothing seems to respond after that, even syncing from console, or small sync button. Typical Microsoft. Next machine will be a PlayStation.
Dude, take out the little back of the controller with the battery, there will be a small metal plate (tiny) sticking up, you need to fiddle woth that to get it to work, and atlease xbox controllers don't break as easy as the playstation controller
hi, I kinda covered this with point #18 in the guide when I talked about the front circuit board issue. As I did, you pushed it forward, but without taking the machine apart. Neat trick. However, I used the tip of a pencil eraser to wedge behind the board to prevent it from happening again. I'd say this 100% fixed my problem. ;)
It’s not my controller that isn’t working, it’s the console that won’t sync. Will buying a charger cable do the trick?
Unplugging the power and blowing in it worked for me
I think I knocked something loose when I whacked it to get the tray open....please help!
This is video which make me happy. Thank you man !
I think the problem is my controller, I recently bought a wireless gaming receiver and it wouldn't connect with my controller, I just tried to play on my xbox and now I can't seem to connect with my XboX either. Did my receiver somehow mess up my controller? I have two and neither work on any device. I've switched batteries and battery packs and nothing works.
I broke my other controller, ( joy stick) so I got a used one for a xbox 360. I have the slim. My original controller connects, no problem. but the white one will not sync. Any help. as this issue is not covered anywhere.
this video was helpful I was about ready to buy a new controller
What worked for me was to bring to controller to the IR port and worked
Only one of my controllers connect but the others don't. can anyone help?
Your other controllers could possibly be connected to another source that is permanent. Which if its permanent, theres no way to fix it unless you recable the controller, or just buy a new one. Sorry.
thank you dude both of the controllers work now
Thanks was at a loss as to why could not get new (ish) remote to connect to Xbox. Gonna subscribe just in case we need further help...we came late to Xbox 360 as daughter (10th birthday present) got hooked on male friends xboxes and i rather they came here then she go where I cant see lol
Thanks. I recently got an xbox360 and I’m borrowing a friend’s controller.
thanx man it worked good advice e other ones didnt work for me but the cable one the one that you said that you need to check if all your cablles are connected good you said and i checked but one of them was wabaly so i fixed it and it worked thx man
Thank you for making this video . And I have a xbox slim.
Saying thanks in 2020🙏🏽
Meh friend only had 1 controller and I have more, I have no idea how to connect mine to their Xbox, what's the deal?
I'm having a problem that isn't really like this but it is, it won't give me any options at all to connect to wireless networks and to configure them and when I click Wireless it says I need a Wireless adapter, please help!
You need to plug in a small wifi wireless gizmo into a usb on the xbox to get the wireless signal. If you google '360 wireless adapter' you will see various small widgets which will NOT work. You must buy genuine 360 adapter. Tbh its quicker and better to buy a long cat 5 lead and use a wired link.
lifeschool Thank you
OMG DUDE THANKS SOO MUCH YOU HELPED ME
In 2023 and it still works
Mine wasn't working and I tried everything. I tried connecting the controller to the Xbox and it did the continuous blinking after the lights synced on the xbox and controller. I then turned off the Xbox and tried to turn it on from the controller. The Xbox turned on and then I pressed sync again and the controllers connected.
i really enjoyed your video but no method worked don't know what to do now
Hi, I have a problem, every time I put on my xbox 360, the light doesn't come on and it says something about insufficient ventilation even though I cleaned it thoroughly, when I want to connect my controller, it just keeps flashing and it doesn't want to connect, I press sync on my xbox and controller but they wont work, PLEASE HELP ME!!!😥🥺
Im not an expert. Search for X-clamps, as you might need to attach one to make it work. I bought an X-clamp and fan combo but never bothered to fit it.
my controler won't start without usb when i connect it 4 lights will flash and usb's light flashes and it continues
Great information bro.....Thank you very much.
got mine to work, the hdmi cord was loose. Why does it need that to connect?
Thank youuuuuuuuu ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
hello well look i have 2 controllers one is connected normally even if i resync it ..it ll connect in a second
the other one wont connect at all .. keeps flashing and thats it .. so i assume the prob is from the controller itself ??? since the other one works perfectly ..please help thnk u
yep, why ask - you can see this is the case?
Hmm. I pressed power button to turn console off but it restarted. The controller turned off by itself. When I pressed the guide button on controller, it synced as though nothing had gone wrong. I guess try cycling the power first. Weird.
bro u helped me thanks bro i forger about the sync button on the controller thank u very very much love u bro i cannot tell about my happiness thnx