@@dominikwent6646 I have not yet started fishing season 😉 but, last year couple of times I used that boat. As far as i remember 4 destinations (one is a base), boat is coming back to the base normally witout problems. Sometimes is 1-1,5 distance from the requested destinations...i guess its becouse of GPS
origin point can also be other points or only 4th?? yes? second question - i have 4 pages each can be settle 4 points - tell me - that means i can have possibiliti to set 15 points and 1 home?
Hello, boat works well, the controller keeps beeping when I turn on boat and controler also after calibration and set up home point. It is really annoying mainly in night. Do you know how to turn off sound od controller or where is the problem?
@@Cresea-Products el basculante del mando derecho se me a estropeado y busco recambios pero la numeración no coincide el mío es B502 , 456 y solo encuentro 502 , 530 funcionaría igualmente o no ?
@@Cresea-Products i do this that´s dosen´t work, only with 3 accus and 1x normal batterie that´s weird.... what´s happened when the accu from the boot ist emty, not from RC ?
You need to set the start point,if you don't,it keeps beeping,it is to remind you to set one because this makes boat return automatically to prevent loss.
Motor not working 1.Please check if water goes into the main board and is burned.If so need to replace main board. 2.Check if weeds are stuck in motors.3. Check if motors are bad(this is less likely to happen).
@@romicastilpeanu3187 If you go to a different place, then yes. Because the GPS signal information is different, to make it better work, please take 20 seconds to calibrate.
Of course, Thank you for response. I cannot create the main return point for the boat. after setting the first point and then creating 1 groundbait point, the 4 symbol does not disappear and the boat does not know where to return. This is the only problem. I think the boat is well calibrated.
@@Cresea-Products Yes, I create 4 as a return point. I do everything the same as on the video, but On the video when you create the return point after that “4” on pilot disapear. In my case is still visibile and boat doesn’t treat is as return point..
I got this boat 1 week ago. First tests on the water were very positiv. Gps options works well.
That's good to know, we posted this only to show customers how to use it, just for a quick guideline.
Can you tell me how its working
@@dominikwent6646 I have not yet started fishing season 😉 but, last year couple of times I used that boat. As far as i remember 4 destinations (one is a base), boat is coming back to the base normally witout problems. Sometimes is 1-1,5 distance from the requested destinations...i guess its becouse of GPS
Just ordered mine! Can’t wait to use it!
That's great, hope it works for ya.
How far can the boat go?
Tu sabes porque el barco al calibrar solo calibra una hélice y nunca termina?
I need help have the sam boat, and when try to calibrate gps he just spins in one direction and do not stop
why does my controller keep beeping? Every 5 seconds? Even after calibration
You didn't set a start point. That beep is to remind you to set one in case boat gets lost
awsome video thank you for explaining very clearly. great baoat and great controlerr
You are welcome,we are still improving...
Hello, is it able to calibrate the boat in streaming water? Or does it just "flush" away?
It can but may not be accurate
origin point can also be other points or only 4th?? yes? second question - i have 4 pages each can be settle 4 points - tell me - that means i can have possibiliti to set 15 points and 1 home?
It's supposed to be no.#1 that is what the factory suggests.
Yes you can, mine has 10 pages and will do up to 40...
How can I order and what are the dimensions of this boat?
hello, one question, is it mandatory to save the 4 gps points? cant i just save 1 which is the one back home and just drive it manually? all the best
Yes, one is needed otherwise it will make beep sound to remind you.
Hello, boat works well, the controller keeps beeping when I turn on boat and controler also after calibration and set up home point. It is really annoying mainly in night.
Do you know how to turn off sound od controller or where is the problem?
You didn't set the start well, it keeps beeping is because it reminds you to set a start otherwise the boat goes and does not come back.
jabo@jaboboat.com
Hi, does this boat have a slow speed? I need it to go at a slow pace. Or does it just travel at a high speed? Thanks.
Hi It travels at a low speed, it does not go at a high speed as it needs to carry baits.
Hallo ! I have the second Remote Control for my boot , the first is defekt ! Witch way I can connect my boot with the new Remote Control ?
Which model did you purchase?
@@Cresea-Products
I User a D16B Boat !
What is the cancel button if the gps cruising is on?
Press forward and upright button on the side of remote, to cancel it, press the upright button again
Ese mismo mando vale para otro barco de la misma marca ?
Para GPS, sí.
Gracias
@@Cresea-Products el basculante del mando derecho se me a estropeado y busco recambios pero la numeración no coincide el mío es B502 , 456 y solo encuentro 502 , 530 funcionaría igualmente o no ?
@@juanabegongonzalez4622 ¿Puedes mostrarnos una foto o un video? No entiendo muy bien lo que quieres decir. Envíe su consulta a jabo@jaboboat.com
El mando le pongo pilas nuevas y me indica como si estuviesen gastadas...y se apaga..
Tiene alguna solución?
Gracias
the RC batteries are empty so quickly is that normal? must change the batteries after 4std ....
Try to replace it with chargeable battery
@@Cresea-Products i do this that´s dosen´t work, only with 3 accus and 1x normal batterie that´s weird....
what´s happened when the accu from the boot ist emty, not from RC ?
My boat keeps making a beeping sound how do i get rid of it?
You need to set the start point,if you don't,it keeps beeping,it is to remind you to set one because this makes boat return automatically to prevent loss.
My same control pad just beeps continuesly why does it just beep continuesly
GPS start is not set.
Hello naybe you know why in remote showing in meters 999?
It’s doesn’t show how much meters i swim with him
Hello,did you set a start point where the boat can remember?
You probably used the boat somewhere else and didn't clear the start yet, long press 4 to clear it. and set a new start
Thank you i’m gonna try that
@@erikasdanas9280 You are welcome
hiya i have no noise when i press for the motors any idea why not
Motor not working 1.Please check if water goes into the main board and is burned.If so need to replace main board. 2.Check if weeds are stuck in motors.3. Check if motors are bad(this is less likely to happen).
4.Check motro wiring
Cuando puedo activar el Mando 🎮 se me
alite boat can fish on the beach to?
Afraid not, water on the beach is salty, the boat may get rust and waves are also much bigger than fresh water.
No,not advise to
This one can: www.amazon.it/dp/B0BV71F2T5
מה המרחק המקסימאלי ?
Это 300 метров, это 300 метров автоматически вперед, но с дальностью действия 1000 GPS. www.jaboboat.com
Tengo este barco y me entra agua no s e dode consultar
¿Quién te vendió este barco? ¿Puede describir más sobre cómo entra el agua en su bote?
Once is calibrate the boat,we have to calibrate every time we go fishing?
@@romicastilpeanu3187 If you go to a different place, then yes. Because the GPS signal information is different, to make it better work, please take 20 seconds to calibrate.
Bonjour il serait possible de mettre en français cette vidéo SVP merci..
a spring from the hinge of the feed flap is broken, where can i get a new one?
www.jaboboat.com
www.jaboboat.com/jabo-bait-boat-shop
Hi, 4 doesn’t want to appear. Do you know why?
Hello dear, what do you mean by 4 does not want to appear, can you explain a little bit further?
Wyjaśnij trochę więcej, abyśmy mogli poznać Twój problem
Of course, Thank you for response. I cannot create the main return point for the boat. after setting the first point and then creating 1 groundbait point, the 4 symbol does not disappear and the boat does not know where to return. This is the only problem. I think the boat is well calibrated.
@@klaudioo93 4 is default return point, please set 4 as home
@@Cresea-Products Yes, I create 4 as a return point. I do everything the same as on the video, but On the video when you create the return point after that “4” on pilot disapear. In my case is still visibile and boat doesn’t treat is as return point..